Package: fdisk
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 427
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: util-linux
Version: 2.31.1-0.4ubuntu3.6
Replaces: util-linux (<< 2.30.1-0ubuntu4~)
Depends: libc6 (>= 2.14), libfdisk1 (>= 2.31.1), libmount1 (>= 2.24.2), libncursesw5 (>= 6), libsmartcols1 (>= 2.28~rc1), libtinfo5 (>= 6)
Breaks: util-linux (<< 2.30.1-0ubuntu4~)
Description: collection of partitioning utilities
 This package contains the classic fdisk, sfdisk and cfdisk partitioning
 utilities from the util-linux suite.
 .
 The utilities included in this package allow you to partition
 your hard disk. The utilities supports both modern and legacy
 partition tables (eg. GPT, MBR, etc).
 .
 The fdisk utility is the classical text-mode utility.
 The cfdisk utilitity gives a more userfriendly curses based interface.
 The sfdisk utility is mostly for automation and scripting uses.
Important: yes
Original-Maintainer: LaMont Jones <lamont@debian.org>

Package: python-idna
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 269
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 2.6-1
Depends: python:any (<< 2.8), python:any (>= 2.7.5-5~)
Description: Python IDNA2008 (RFC 5891) handling (Python 2)
 A library to support the Internationalised Domain Names in Applications (IDNA)
 protocol as specified in RFC 5891. This version of the protocol is often
 referred to as “IDNA2008” and can produce different results from the earlier
 standard from 2003.
 .
 The library is also intended to act as a suitable drop-in replacement for the
 “encodings.idna” module that comes with the Python standard library but
 currently only supports the older 2003 specification.
 .
 This package contains the module for Python 2.
Original-Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Homepage: https://github.com/kjd/idna

Package: libpam-runtime
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 300
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: pam
Version: 1.1.8-3.6ubuntu2.18.04.1
Replaces: libpam0g-dev, libpam0g-util
Depends: debconf (>= 0.5) | debconf-2.0, debconf (>= 1.5.19) | cdebconf, libpam-modules (>= 1.0.1-6)
Conflicts: libpam0g-util
Conffiles:
 /etc/pam.conf 87fc76f18e98ee7d3848f6b81b3391e5
 /etc/pam.d/other 31aa7f2181889ffb00b87df4126d1701
Description: Runtime support for the PAM library
 Contains configuration files and  directories required for
 authentication  to work on Debian systems.  This package is required
 on almost all installations.
Homepage: http://www.linux-pam.org/
Original-Maintainer: Steve Langasek <vorlon@debian.org>

Package: libncurses5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 283
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: ncurses
Version: 6.1-1ubuntu1.18.04
Depends: libtinfo5 (= 6.1-1ubuntu1.18.04), libc6 (>= 2.14)
Recommends: libgpm2
Description: shared libraries for terminal handling
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the shared libraries necessary to run programs
 compiled with ncurses.
Homepage: https://invisible-island.net/ncurses/
Original-Maintainer: Craig Small <csmall@debian.org>

Package: libcom-err2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 87
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: e2fsprogs
Version: 1.44.1-1ubuntu1.3
Replaces: libcomerr2 (<< 1.43.9-1~)
Provides: libcomerr2 (= 1.44.1-1ubuntu1.3)
Depends: libc6 (>= 2.17)
Breaks: libcomerr2 (<< 1.43.9-1~)
Description: common error description library
 libcomerr is an attempt to present a common error-handling mechanism to
 manipulate the most common form of error code in a fashion that does not
 have the problems identified with mechanisms commonly in use.
Homepage: http://e2fsprogs.sourceforge.net
Original-Maintainer: Theodore Y. Ts'o <tytso@mit.edu>

Package: libpaper1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 61
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libpaper
Version: 1.1.24+nmu5ubuntu1
Replaces: libpaperg (<< 1.1.9)
Provides: libpaperg
Depends: libc6 (>= 2.14), debconf (>= 0.5) | debconf-2.0, ucf (>= 0.28), dpkg (>= 1.17.2)
Recommends: libpaper-utils
Description: library for handling paper characteristics
 The libpaper paper-handling library automates recognition of many
 different paper types and sizes for programs that need to deal with
 printed output.
Original-Maintainer: Giuseppe Sacco <eppesuig@debian.org>

Package: libpython3-stdlib
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 37
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: python3-defaults
Version: 3.6.7-1~18.04
Depends: libpython3.6-stdlib (>= 3.6.7-1~)
Description: interactive high-level object-oriented language (default python3 version)
 Python, the high-level, interactive object oriented language,
 includes an extensive class library with lots of goodies for
 network programming, system administration, sounds and graphics.
 .
 This package is a dependency package, which depends on Debian's default
 Python 3 version (currently v3.6).
Homepage: https://www.python.org/
Original-Maintainer: Matthias Klose <doko@debian.org>

Package: python3-s3transfer
Status: install ok unpacked
Priority: optional
Section: python
Installed-Size: 235
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-s3transfer
Version: 0.1.13-1
Depends: python3-botocore, python3:any (>= 3.3.2-2~)
Description: Amazon S3 Transfer Manager for Python3
 S3transfer is a Python library for managing Amazon S3 transfers.
 .
 This package contains the module for Python 3.
Original-Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Homepage: https://github.com/boto/s3transfer

Package: libapt-pkg5.0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 3139
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: apt
Version: 1.6.12
Provides: libapt-pkg (= 1.6.12)
Depends: libbz2-1.0, libc6 (>= 2.27), libgcc1 (>= 1:3.0), liblz4-1 (>= 0.0~r127), liblzma5 (>= 5.1.1alpha+20120614), libstdc++6 (>= 5.2), libsystemd0 (>= 221), libudev1 (>= 183), libzstd1 (>= 1.3.2), zlib1g (>= 1:1.2.2.3)
Recommends: apt (>= 1.6.12)
Breaks: appstream (<< 0.9.0-3~), apt (<< 1.1~exp14), libapt-inst1.5 (<< 0.9.9~)
Description: package management runtime library
 This library provides the common functionality for searching and
 managing packages as well as information about packages.
 Higher-level package managers can depend upon this library.
 .
 This includes:
  * retrieval of information about packages from multiple sources
  * retrieval of packages and all dependent packages
    needed to satisfy a request either through an internal
    solver or by interfacing with an external one
  * authenticating the sources and validating the retrieved data
  * installation and removal of packages in the system
  * providing different transports to retrieve data over cdrom, ftp,
    http(s), rsh as well as an interface to add more transports like
    tor+http(s) (apt-transport-tor).
Original-Maintainer: APT Development Team <deity@lists.debian.org>

Package: libaudit1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 147
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: audit
Version: 1:2.8.2-1ubuntu1
Depends: libaudit-common (>= 1:2.8.2-1ubuntu1), libc6 (>= 2.14), libcap-ng0
Description: Dynamic library for security auditing
 The audit-libs package contains the dynamic libraries needed for
 applications to use the audit framework. It is used to monitor systems for
 security related events.
Homepage: https://people.redhat.com/sgrubb/audit/
Original-Maintainer: Laurent Bigonville <bigon@debian.org>

Package: readline-common
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 78
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: readline
Version: 7.0-3
Replaces: libreadline-common, libreadline4 (<< 4.3-16), libreadline5 (<< 5.0-11)
Depends: dpkg (>= 1.15.4) | install-info
Suggests: readline-doc
Conflicts: libreadline-common, libreadline5 (<< 5.0-11)
Description: GNU readline and history libraries, common files
 The GNU readline library aids in the consistency of user interface
 across discrete programs that need to provide a command line
 interface.
 .
 The GNU history library provides a consistent user interface for
 recalling lines of previously typed input.
Original-Maintainer: Matthias Klose <doko@debian.org>

Package: python3-yaml
Status: install ok half-configured
Priority: optional
Section: python
Installed-Size: 459
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: pyyaml
Version: 3.12-1build2
Depends: python3 (<< 3.7), python3 (>= 3.6~), python3:any (>= 3.3.2-2~), libc6 (>= 2.14), libyaml-0-2
Description: YAML parser and emitter for Python3
 Python3-yaml is a complete YAML 1.1 parser and emitter for Python3.  It can
 parse all examples from the specification. The parsing algorithm is simple
 enough to be a reference for YAML parser implementors. A simple extension API
 is also provided.  The package is built using libyaml for improved speed.
Original-Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Homepage: https://github.com/yaml/pyyaml

Package: libpython3.6-stdlib
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 7822
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: python3.6
Version: 3.6.9-1~18.04
Replaces: libpython3.6-testsuite (<< 3.6.6-2), python3-distutils (<< 3.6.5-2)
Depends: libpython3.6-minimal (= 3.6.9-1~18.04), mime-support, libbz2-1.0, libc6 (>= 2.15), libdb5.3, libffi6 (>= 3.0.4), liblzma5 (>= 5.1.1alpha+20120614), libmpdec2, libncursesw5 (>= 6), libreadline7 (>= 7.0~beta), libsqlite3-0 (>= 3.5.9), libtinfo5 (>= 6)
Breaks: libmpdec2 (<< 2.4.2), libpython3.6-testsuite (<< 3.6.6-2), python3-distutils (<< 3.6.5-2), python3-numpy (<< 1:1.12.1-3.1), python3-tk (<< 3.6.4~rc1-2)
Description: Interactive high-level object-oriented language (standard library, version 3.6)
 Python is a high-level, interactive, object-oriented language. Its 3.6 version
 includes an extensive class library with lots of goodies for
 network programming, system administration, sounds and graphics.
 .
 This package contains Python 3.6's standard library. It is normally not
 used on its own, but as a dependency of python3.6.
Original-Maintainer: Matthias Klose <doko@debian.org>

Package: nodejs-doc
Status: install ok installed
Priority: optional
Section: doc
Installed-Size: 5861
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: nodejs
Version: 8.10.0~dfsg-2ubuntu0.4
Replaces: nodejs (<< 6.11.2~dfsg-3)
Recommends: nodejs
Conflicts: nodejs (<< 6.11.2~dfsg-3)
Description: API documentation for Node.js, the javascript platform
 Node.js is a platform built on Chrome's JavaScript runtime for easily
 building fast, scalable network applications. Node.js uses an
 event-driven, non-blocking I/O model that makes it lightweight and
 efficient, perfect for data-intensive real-time applications that run
 across distributed devices.
 .
 Node.js is bundled with several useful libraries to handle server
 tasks:
 .
 System, Events, Standard I/O, Modules, Timers, Child Processes, POSIX,
 HTTP, Multipart Parsing, TCP, DNS, Assert, Path, URL, Query Strings.
 .
 This package contains API documentation for nodejs.
Homepage: http://nodejs.org/
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>

Package: libtinfo5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 497
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: ncurses
Version: 6.1-1ubuntu1.18.04
Replaces: libncurses5 (<< 5.9-3)
Depends: libc6 (>= 2.16)
Breaks: dialog (<< 1.2-20130523)
Description: shared low-level terminfo library for terminal handling
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the shared low-level terminfo library.
Homepage: https://invisible-island.net/ncurses/
Original-Maintainer: Craig Small <csmall@debian.org>

Package: manpages
Status: install ok installed
Priority: standard
Section: doc
Installed-Size: 1471
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 4.15-1
Suggests: man-browser
Breaks: manpages-dev (<< 4.13-3)
Description: Manual pages about using a GNU/Linux system
 This package contains GNU/Linux manual pages for these sections:
  4 = Devices (e.g. hd, sd).
  5 = File formats and protocols, syntaxes of several system
      files (e.g. wtmp, /etc/passwd, nfs).
  7 = Conventions and standards, macro packages, etc.
      (e.g. nroff, ascii).
 .
 Sections 1, 6 and 8 are provided by the respective applications. This
 package only includes the intro man page describing the section.
 .
 The man pages describe syntaxes of several system files.
Original-Maintainer: Martin Schulze <joey@debian.org>
Homepage: https://www.kernel.org/doc/man-pages/

Package: perl-base
Essential: yes
Status: install ok installed
Priority: required
Section: perl
Installed-Size: 7826
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: perl
Version: 5.26.1-6ubuntu0.3
Replaces: libfile-path-perl (<< 2.12.01), libfile-temp-perl (<< 0.2304), libio-socket-ip-perl (<< 0.38), libscalar-list-utils-perl (<< 1:1.46.02), libsocket-perl (<< 2.020.03), libxsloader-perl (<< 0.27), perl (<< 5.10.1-12), perl-modules (<< 5.20.1-3)
Provides: libfile-path-perl, libfile-temp-perl, libio-socket-ip-perl, libscalar-list-utils-perl, libsocket-perl, libxsloader-perl, perlapi-5.26.0, perlapi-5.26.1
Pre-Depends: libc6 (>= 2.23), dpkg (>= 1.17.17)
Suggests: perl
Breaks: amanda-common (<< 1:3.3.9-2), autoconf2.13 (<< 2.13-45), backuppc (<< 3.3.1-2), debconf (<< 1.5.61), dh-haskell (<< 0.3), intltool (<< 0.51.0-4), libalien-wxwidgets-perl (<< 0.65+dfsg-2), libanyevent-perl (<< 7.070-2), libcommon-sense-perl (<< 3.72-2~), libexception-class-perl (<< 1.42), libfile-path-perl (<< 2.12.01), libfile-spec-perl (<< 3.6700), libfile-temp-perl (<< 0.2304), libgtk2-perl-doc (<< 2:1.2491-4), libio-socket-ip-perl (<< 0.38), libjcode-perl (<< 2.13-3), libmarc-charset-perl (<< 1.2), libsbuild-perl (<< 0.67.0-1), libscalar-list-utils-perl (<< 1:1.46.02), libsocket-perl (<< 2.020.03), libxsloader-perl (<< 0.27), mailagent (<< 1:3.1-81-2), pdl (<< 1:2.007-4), perl (<< 5.26.1~), perl-modules (<< 5.26.1~), slic3r (<< 1.2.9+dfsg-6.1), slic3r-prusa (<< 1.37.0+dfsg-1.1), texinfo (<< 6.1.0.dfsg.1-8)
Conflicts: defoma (<< 0.11.12), doc-base (<< 0.10.3), mono-gac (<< 2.10.8.1-3), safe-rm (<< 0.8), update-inetd (<< 4.41)
Description: minimal Perl system
 Perl is a scripting language used in many system scripts and utilities.
 .
 This package provides a Perl interpreter and the small subset of the
 standard run-time library required to perform basic tasks. For a full
 Perl installation, install "perl" (and its dependencies, "perl-modules-5.26"
 and "perl-doc").
Homepage: http://dev.perl.org/perl5/
Original-Maintainer: Niko Tyni <ntyni@debian.org>

Package: libudev1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 231
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: systemd
Version: 237-3ubuntu10.39
Depends: libc6 (>= 2.25)
Description: libudev shared library
 This library provides access to udev device information.
Homepage: https://www.freedesktop.org/wiki/Software/systemd
Original-Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>

Package: libunistring2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1569
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libunistring
Version: 0.9.9-0ubuntu2
Depends: libc6 (>= 2.14)
Description: Unicode string library for C
 The 'libunistring' library implements Unicode strings (in the UTF-8,
 UTF-16, and UTF-32 encodings), together with functions for Unicode
 characters (character names, classifications, properties) and
 functions for string processing (formatted output, width, word
 breaks, line breaks, normalization, case folding, regular
 expressions).
 .
 This package contains the shared library.
Original-Maintainer: Jörg Frings-Fürst <debian@jff.email>
Homepage: http://www.gnu.org/software/libunistring/

Package: libnettle6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 373
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: nettle
Version: 3.4-1
Depends: libc6 (>= 2.14)
Description: low level cryptographic library (symmetric and one-way cryptos)
 Nettle is a cryptographic library that is designed to fit easily in more or
 less any context: In crypto toolkits for object-oriented languages (C++,
 Python, Pike, ...), in applications like LSH or GNUPG, or even in kernel
 space.
 .
 It tries to solve a problem of providing a common set of cryptographic
 algorithms for higher-level applications by implementing a
 context-independent set of cryptographic algorithms. In that light, Nettle
 doesn't do any memory allocation or I/O, it simply provides the
 cryptographic algorithms for the application to use in any environment and
 in any way it needs.
 .
 This package contains the symmetric and one-way cryptographic
 algorithms. To avoid having this package depend on libgmp, the
 asymmetric cryptos reside in a separate library, libhogweed.
Original-Maintainer: Magnus Holmgren <holmgren@debian.org>
Homepage: http://www.lysator.liu.se/~nisse/nettle/

Package: libhttp-parser2.7.1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 60
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: http-parser
Version: 2.7.1-2
Depends: libc6 (>= 2.2.5)
Description: parser for HTTP messages written in C
 It parses both requests and responses. The parser is designed to be used in
 performance HTTP applications. It does not make any syscalls nor allocations,
 it does not buffer data, it can be interrupted at anytime. Depending on your
 architecture, it only requires about 40 bytes of data per message stream (in
 a web server that is per connection).
Original-Maintainer: Christoph Biedl <debian.axhn@manchmal.in-ulm.de>
Homepage: https://github.com/joyent/http-parser

Package: libattr1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 36
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: attr
Version: 1:2.4.47-2build1
Depends: libc6 (>= 2.4)
Conflicts: attr (<< 2.0.0)
Description: Extended attribute shared library
 Contains the runtime environment required by programs that make use
 of extended attributes.
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Homepage: http://savannah.nongnu.org/projects/attr/

Package: libk5crypto3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 308
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: krb5
Version: 1.16-2ubuntu0.1
Depends: libc6 (>= 2.14), libkrb5support0 (>= 1.16)
Suggests: krb5-doc, krb5-user
Breaks: libgssapi-krb5-2 (<= 1.10+dfsg~alpha1), libkrb5-3 (<= 1.8~aa)
Description: MIT Kerberos runtime libraries - Crypto Library
 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service.  That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the runtime cryptography libraries used by
 applications and Kerberos clients.
Homepage: http://web.mit.edu/kerberos/
Original-Maintainer: Sam Hartman <hartmans@debian.org>

Package: libss2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 99
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: e2fsprogs
Version: 1.44.1-1ubuntu1.3
Replaces: e2fsprogs (<< 1.34-1)
Depends: libcom-err2, libc6 (>= 2.17)
Description: command-line interface parsing library
 libss provides a simple command-line interface parser which will
 accept input from the user, parse the command into an argv argument
 vector, and then dispatch it to a handler function.
 .
 It was originally inspired by the Multics SubSystem library.
Homepage: http://e2fsprogs.sourceforge.net
Original-Maintainer: Theodore Y. Ts'o <tytso@mit.edu>

Package: python-urllib3
Status: install ok unpacked
Priority: optional
Section: python
Installed-Size: 401
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.22-1ubuntu0.18.04.1
Depends: python:any (<< 2.8), python:any (>= 2.7.5-5~), python-six
Recommends: ca-certificates, python-cryptography, python-idna, python-ipaddress, python-openssl
Suggests: python-ntlm, python-socks
Description: HTTP library with thread-safe connection pooling for Python
 urllib3 supports features left out of urllib and urllib2 libraries.
 .
   - Re-use the same socket connection for multiple requests (HTTPConnectionPool
     and HTTPSConnectionPool) (with optional client-side certificate
     verification).
   - File posting (encode_multipart_formdata).
   - Built-in redirection and retries (optional).
   - Supports gzip and deflate decoding.
   - Thread-safe and sanity-safe.
   - Small and easy to understand codebase perfect for extending and
     building upon.
Homepage: http://urllib3.readthedocs.org
Original-Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>

Package: libpaper-utils
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 39
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: libpaper
Version: 1.1.24+nmu5ubuntu1
Replaces: libpaper1 (<< 1.1.10), libpaperg (<< 1.1.9)
Depends: libc6 (>= 2.4), libpaper1
Description: library for handling paper characteristics (utilities)
 The libpaper paper-handling library automates recognition of many
 different paper types and sizes for programs that need to deal with
 printed output.
 .
 This package contains utilities for setting the system's default
 paper type and for accessing paper type information from shell
 scripts.
Original-Maintainer: Giuseppe Sacco <eppesuig@debian.org>

Package: libexpat1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 439
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: expat
Version: 2.2.5-3ubuntu0.2
Depends: libc6 (>= 2.25)
Conflicts: wink (<= 1.5.1060-4)
Description: XML parsing C library - runtime library
 This package contains the runtime, shared library of expat, the C
 library for parsing XML. Expat is a stream-oriented parser in
 which an application registers handlers for things the parser
 might find in the XML document (like start tags).
Homepage: https://libexpat.github.io/
Original-Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>

Package: libicu60
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 31074
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: icu
Version: 60.2-3ubuntu3.1
Depends: libc6 (>= 2.14), libgcc1 (>= 1:3.0), libstdc++6 (>= 5.2)
Breaks: openttd (<= 1.7.1-1)
Description: International Components for Unicode
 ICU is a C++ and C library that provides robust and full-featured
 Unicode and locale support.  This package contains the runtime
 libraries for ICU.
Homepage: http://www.icu-project.org
Original-Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>

Package: jq
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 88
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1.5+dfsg-2
Depends: libjq1 (= 1.5+dfsg-2), libc6 (>= 2.4)
Description: lightweight and flexible command-line JSON processor
 jq is like sed for JSON data – you can use it to slice
 and filter and map and transform structured data with
 the same ease that sed, awk, grep and friends let you
 play with text.
 .
 It is written in portable C, and it has minimal runtime
 dependencies.
 .
 jq can mangle the data format that you have into the
 one that you want with very little effort, and the
 program to do so is often shorter and simpler than
 you’d expect.
Original-Maintainer: ChangZhuo Chen (陳昌倬) <czchen@debian.org>
Homepage: https://github.com/stedolan/jq

Package: python-asn1crypto
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 493
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: asn1crypto
Version: 0.24.0-1
Depends: python:any (<< 2.8), python:any (>= 2.7.5-5~)
Description: Fast ASN.1 parser and serializer (Python 2)
 asn1crypto focuses on:
  - Delayed parsing of byte string values
  - Persistence of original ASN.1 encoded data until a value is changed
  - Lazy loading of child fields
  - Utilization of high-level Python stdlib modules
 .
 This package contains the Python 2 version of asn1crypto.
Original-Maintainer: Tristan Seligmann <mithrandi@debian.org>
Homepage: https://github.com/wbond/asn1crypto

Package: python3-roman
Status: install ok unpacked
Priority: optional
Section: python
Installed-Size: 33
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: python-roman
Version: 2.0.0-3
Depends: python3:any (>= 3.3.2-2~)
Description: module for generating/analyzing Roman numerals for Python 3
 This module converts from and to Roman numerals. It can convert numbers
 from 1 to 4999 and understands the common shortcuts (IX == 9), but not
 illegal ones (MIM == 1999).
 .
 This package includes Python 3 modules.
Original-Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Homepage: https://pypi.python.org/pypi/roman/

Package: liblzma5
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 338
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: xz-utils
Version: 5.2.2-1.3
Depends: libc6 (>= 2.17)
Description: XZ-format compression library
 XZ is the successor to the Lempel-Ziv/Markov-chain Algorithm
 compression format, which provides memory-hungry but powerful
 compression (often better than bzip2) and fast, easy decompression.
 .
 The native format of liblzma is XZ; it also supports raw (headerless)
 streams and the older LZMA format used by lzma. (For 7-Zip's related
 format, use the p7zip package instead.)
Original-Maintainer: Jonathan Nieder <jrnieder@gmail.com>
Homepage: http://tukaani.org/xz/

Package: fontconfig-config
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 414
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: fontconfig
Version: 2.12.6-0ubuntu2
Replaces: fontconfig (<< 2.3.2-2)
Depends: ucf (>= 0.29), fonts-dejavu-core | ttf-bitstream-vera | fonts-liberation | fonts-freefont
Conflicts: fontconfig (<< 2.3.2-2)
Conffiles:
 /etc/fonts/conf.avail/10-antialias.conf 3629dcc380ac8c5b0306febc33b5667b
 /etc/fonts/conf.avail/10-autohint.conf 2f1cac91d6c79102f0de9956d39037d5
 /etc/fonts/conf.avail/10-hinting-full.conf 7355ccf563673bba3a624a9743f08ecd
 /etc/fonts/conf.avail/10-hinting-medium.conf 37e71080d951c5a10bde8fae35054a53
 /etc/fonts/conf.avail/10-hinting-none.conf 3fda7e38a4df988da0145785727a0c35
 /etc/fonts/conf.avail/10-hinting-slight.conf e5e7ba1dabdf33446e2eecea658fd249
 /etc/fonts/conf.avail/10-no-sub-pixel.conf 3ce5b92d9984c968827c70f9c89cfef9
 /etc/fonts/conf.avail/10-scale-bitmap-fonts.conf b19465d66bd1530132fb1a397e538346
 /etc/fonts/conf.avail/10-sub-pixel-bgr.conf 3d239181743d3ebfbbfa2bafe211ae0c
 /etc/fonts/conf.avail/10-sub-pixel-rgb.conf 2ac915a20e9b2b969d81c9b359afffce
 /etc/fonts/conf.avail/10-sub-pixel-vbgr.conf 29d7b694ec6d7260a475fe9d9a45a9a0
 /etc/fonts/conf.avail/10-sub-pixel-vrgb.conf 15bc20b8895b039e23952c637bcc1a70
 /etc/fonts/conf.avail/10-unhinted.conf 532865fefdf3e37ceeb77010accb3b47
 /etc/fonts/conf.avail/11-lcdfilter-default.conf a877f23d2e9179ef3a1ee0ab6a9e2b15
 /etc/fonts/conf.avail/11-lcdfilter-legacy.conf 7eeabd78833172177d7f92d39ec273ce
 /etc/fonts/conf.avail/11-lcdfilter-light.conf f6f338937c5a7a0254ab27a5532a79a0
 /etc/fonts/conf.avail/20-unhint-small-vera.conf 6fb496d0bb963a54d5db870955ddd771
 /etc/fonts/conf.avail/25-unhint-nonlatin.conf a5379350710f56a807962f3f06d3ffc1
 /etc/fonts/conf.avail/30-metric-aliases.conf 8aee43360f3d9187cb106058010ad7e5
 /etc/fonts/conf.avail/40-nonlatin.conf 369218e37e97e775509af39d8068af9d
 /etc/fonts/conf.avail/45-generic.conf 4f38c1c74a35ad3f3b0019d2e70a0ced
 /etc/fonts/conf.avail/45-latin.conf ad179863cb00202a2439ef508c0ce47f
 /etc/fonts/conf.avail/49-sansserif.conf 22278b0b48e5864d9c7fcbc178da0db3
 /etc/fonts/conf.avail/50-user.conf d01cf387e9d7ebacb173629853094d76
 /etc/fonts/conf.avail/51-local.conf a2fa562c168c2c4cc0c2480bfdc0f8eb
 /etc/fonts/conf.avail/53-monospace-lcd-filter.conf c26a2fcc075fe704fefc68d13219cb20
 /etc/fonts/conf.avail/60-generic.conf 52ab5417c77e350131006a99c08a2962
 /etc/fonts/conf.avail/60-latin.conf 49e8e27d0791250540cb4b598adbbd84
 /etc/fonts/conf.avail/65-fonts-persian.conf 4600ab82eed76e726bffb2fc99d1f1b7
 /etc/fonts/conf.avail/65-khmer.conf ce66ea0c26f43091ab70092f3f7024d4
 /etc/fonts/conf.avail/65-nonlatin.conf fde2fbf08ea245a4bb0640a8128d5c03
 /etc/fonts/conf.avail/69-unifont.conf 49a6cb52e1cf23e0f691807a3e8c105d
 /etc/fonts/conf.avail/70-force-bitmaps.conf 6423e63e204d4ea4629cd3f58636fcdc
 /etc/fonts/conf.avail/70-no-bitmaps.conf dccfa658875eea3b30514d7a8bc306bc
 /etc/fonts/conf.avail/70-yes-bitmaps.conf 91c414090c7d8bfe557785fe845cb6bd
 /etc/fonts/conf.avail/80-delicious.conf fcad9a0561af18b7965910ccea55453f
 /etc/fonts/conf.avail/90-synthetic.conf 7659edb861f44ff8e9f4e31567d24e47
 /etc/fonts/conf.d/README 42d13304ed2e9e5b60b74d6ed29b3729
 /etc/fonts/fonts.conf e5a20933b7971c1cb7d858913709dcba
Description: generic font configuration library - configuration
 Fontconfig is a font configuration and customization library, which
 does not depend on the X Window System. It is designed to locate
 fonts within the system and select them according to requirements
 specified by applications.
 .
 This package contains the configuration files and scripts for fontconfig.
Homepage: https://www.freedesktop.org/wiki/Software/fontconfig/
Original-Maintainer: Keith Packard <keithp@debian.org>

Package: parallel
Status: install ok unpacked
Priority: extra
Section: utils
Installed-Size: 997
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 20161222-1
Depends: perl, procps, sysstat, perl:any
Description: build and execute command lines from standard input in parallel
 GNU Parallel is a shell tool for executing jobs in parallel using one
 or more machines. A job is typically a single command or a small
 script that has to be run for each of the lines in the input. The
 typical input is a list of files, a list of hosts, a list of users, or
 a list of tables.
 .
 If you use xargs today you will find GNU Parallel very easy to use. If
 you write loops in shell, you will find GNU Parallel may be able to
 replace most of the loops and make them run faster by running jobs in
 parallel. If you use ppss or pexec you will find GNU Parallel will
 often make the command easier to read.
 .
 GNU Parallel also makes sure output from the commands is the same
 output as you would get had you run the commands sequentially. This
 makes it possible to use output from GNU Parallel as input for other
 programs.
Original-Maintainer: Rogério Brito <rbrito@ime.usp.br>
Homepage: https://www.gnu.org/software/parallel/

Package: python3-pil
Status: install ok unpacked
Priority: optional
Section: python
Installed-Size: 1369
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: pillow
Version: 5.1.0-1ubuntu0.2
Replaces: python3-imaging (<< 1.1.7+2.0.0-1.1)
Provides: python3-pillow
Depends: python3 (<< 3.7), python3 (>= 3.6~), python3:any (>= 3.3.2-2~), mime-support | python3-pil.imagetk, libc6 (>= 2.14), libfreetype6 (>= 2.2.1), libjpeg8 (>= 8c), liblcms2-2 (>= 2.2+git20110628), libtiff5 (>= 4.0.3), libwebp6 (>= 0.5.1), libwebpdemux2 (>= 0.5.1), libwebpmux3 (>= 0.6.1-2), zlib1g (>= 1:1.1.4)
Recommends: python3-olefile
Suggests: python-pil-doc, python3-pil-dbg
Breaks: python3-imaging (<< 1.1.7+2.0.0-1.1)
Conflicts: python3-imaging (<< 1.1.7+2.0.0-1.1)
Description: Python Imaging Library (Python3)
 The Python Imaging Library (PIL) adds an image object to your Python
 interpreter. You can load images from a variety of file formats, and
 apply a rich set of image operations to them.
 .
 Image Objects:
  o Bilevel, greyscale, palette, true colour (RGB), true colour with
    transparency (RGBA).
  o colour separation (CMYK).
  o Copy, cut, paste operations.
  o Flip, transpose, resize, rotate, and arbitrary affine transforms.
  o Transparency operations.
  o Channel and point operations.
  o Colour transforms, including matrix operations.
  o Image enhancement, including convolution filters.
 .
 File Formats:
  o Full (Open/Load/Save): BMP, EPS (with ghostscript), GIF, IM, JPEG,
    MSP, PDF, PNG, PPM, TIFF, XBM.
  o Read only (Open/Load): ARG, CUR, DCX, FLI, FPX, GBR, GD, ICO, IMT, IPTC,
    MCIDAS, MPEG, PhotoCD, PCX, PIXAR, PSD, TGA, SGI, SUN, TGA, WMF, XPM.
  o Save only: PDF, EPS (without ghostscript).
Homepage: http://python-pillow.github.io/
Original-Maintainer: Matthias Klose <doko@debian.org>

Package: libidn2-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 146
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libidn2
Version: 2.0.4-1.1ubuntu0.2
Depends: libc6 (>= 2.14), libunistring2 (>= 0.9.7)
Description: Internationalized domain names (IDNA2008/TR46) library
 Libidn2 implements the revised algorithm for internationalized domain
 names called IDNA2008/TR46.
 .
 This package contains runtime libraries.
Homepage: https://www.gnu.org/software/libidn/#libidn2
Original-Maintainer: Debian Libidn team <help-libidn@gnu.org>

Package: libperl-dev
Status: install ok unpacked
Priority: optional
Section: libdevel
Installed-Size: 17049
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: perl
Version: 5.26.1-6ubuntu0.3
Depends: perl:any (= 5.26.1-6ubuntu0.3), libperl5.26 (= 5.26.1-6ubuntu0.3), libc6-dev | libc-dev
Description: Perl library: development files
 Files for developing applications which embed a Perl interpreter.
Homepage: http://dev.perl.org/perl5/
Original-Maintainer: Niko Tyni <ntyni@debian.org>

Package: python3.6
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 328
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: allowed
Version: 3.6.9-1~18.04
Depends: python3.6-minimal (= 3.6.9-1~18.04), libpython3.6-stdlib (= 3.6.9-1~18.04), mime-support
Suggests: python3.6-venv, python3.6-doc, binutils
Breaks: python3-all (<< 3.6.5~rc1-1), python3-dev (<< 3.6.5~rc1-1), python3-venv (<< 3.6.5-2)
Description: Interactive high-level object-oriented language (version 3.6)
 Python is a high-level, interactive, object-oriented language. Its 3.6 version
 includes an extensive class library with lots of goodies for
 network programming, system administration, sounds and graphics.
Original-Maintainer: Matthias Klose <doko@debian.org>

Package: libpam-modules-bin
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 267
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: pam
Version: 1.1.8-3.6ubuntu2.18.04.1
Replaces: libpam-modules (<< 1.1.3-8)
Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.14), libpam0g (>= 0.99.7.1), libselinux1 (>= 1.32)
Description: Pluggable Authentication Modules for PAM - helper binaries
 This package contains helper binaries used by the standard set of PAM
 modules in the libpam-modules package.
Homepage: http://www.linux-pam.org/
Original-Maintainer: Steve Langasek <vorlon@debian.org>

Package: pv
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 120
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1.6.6-1
Depends: libc6 (>= 2.15)
Suggests: doc-base
Description: Shell pipeline element to meter data passing through
 pv (Pipe Viewer) can be inserted into any normal pipeline between two
 processes to give a visual indication of how quickly data is passing through,
 how long it has taken, how near to completion it is, and an estimate of how
 long it will be until completion.
 .
 To use it, insert it in a pipeline between two processes, with the
 appropriate options. Its standard input will be passed through to its
 standard output and progress will be shown on standard error.
Original-Maintainer: Antoine Beaupré <anarcat@debian.org>
Homepage: https://www.ivarch.com/programs/pv.shtml

Package: grep
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 508
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 3.1-2build1
Provides: rgrep
Depends: dpkg (>= 1.15.4) | install-info
Pre-Depends: libc6 (>= 2.14), libpcre3
Suggests: libpcre3 (>= 7.7)
Conflicts: rgrep
Description: GNU grep, egrep and fgrep
 'grep' is a utility to search for text in files; it can be used from the
 command line or in scripts.  Even if you don't want to use it, other packages
 on your system probably will.
 .
 The GNU family of grep utilities may be the "fastest grep in the west".
 GNU grep is based on a fast lazy-state deterministic matcher (about
 twice as fast as stock Unix egrep) hybridized with a Boyer-Moore-Gosper
 search for a fixed string that eliminates impossible text from being
 considered by the full regexp matcher without necessarily having to
 look at every character. The result is typically many times faster
 than Unix grep or egrep. (Regular expressions containing backreferencing
 will run more slowly, however.)
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Homepage: http://www.gnu.org/software/grep/

Package: sysstat
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 1168
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 11.6.1-1ubuntu0.1
Depends: lsb-base (>= 3.0-6), ucf (>= 2.003), xz-utils, debconf (>= 0.5) | debconf-2.0, libc6 (>= 2.14), libsensors4 (>= 1:3.0.0)
Recommends: cron | cron-daemon
Suggests: isag
Conffiles:
 /etc/cron.d/sysstat 455c3c071b6daabb4e4490828975034c
 /etc/cron.daily/sysstat 19b1317e195208eed1a0bcd68be2e637
 /etc/init.d/sysstat a909338166a483fe1ed4a4abc9a5ff4c
 /etc/profile.d/sysstat.sh 6d304feee06c999916f1a14d11e86988
 /etc/sysstat/sysstat bcdd8bbedce5ae29f52601dd637a3c83
 /etc/sysstat/sysstat.ioconf fa92b01baa2130e26822c30fb27ac56e
Description: system performance tools for Linux
 The sysstat package contains the following system performance tools:
  - sar: collects and reports system activity information;
  - iostat: reports CPU utilization and disk I/O statistics;
  - tapestat: reports statistics for tapes connected to the system;
  - mpstat: reports global and per-processor statistics;
  - pidstat: reports statistics for Linux tasks (processes);
  - sadf: displays data collected by sar in various formats;
  - cifsiostat: reports I/O statistics for CIFS filesystems.
 .
 The statistics reported by sar deal with I/O transfer rates,
 paging activity, process-related activities, interrupts,
 network activity, memory and swap space utilization, CPU
 utilization, kernel activities and TTY statistics, among
 others. Both UP and SMP machines are fully supported.
Homepage: http://pagesperso-orange.fr/sebastien.godard/
Original-Maintainer: Robert Luberda <robert@debian.org>

Package: python-chardet
Status: install ok unpacked
Priority: optional
Section: python
Installed-Size: 410
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: chardet
Version: 3.0.4-1
Depends: python:any (<< 2.8), python:any (>= 2.7.5-5~), python-pkg-resources
Description: universal character encoding detector for Python2
 Chardet takes a sequence of bytes in an unknown character encoding, and
 attempts to determine the encoding.
 .
 Supported encodings:
  * ASCII, UTF-8, UTF-16 (2 variants), UTF-32 (4 variants)
  * Big5, GB2312, EUC-TW, HZ-GB-2312, ISO-2022-CN (Traditional and Simplified
    Chinese)
  * EUC-JP, SHIFT_JIS, ISO-2022-JP (Japanese)
  * EUC-KR, ISO-2022-KR (Korean)
  * KOI8-R, MacCyrillic, IBM855, IBM866, ISO-8859-5, windows-1251 (Cyrillic)
  * ISO-8859-2, windows-1250 (Hungarian)
  * ISO-8859-5, windows-1251 (Bulgarian)
  * windows-1252 (English)
  * ISO-8859-7, windows-1253 (Greek)
  * ISO-8859-8, windows-1255 (Visual and Logical Hebrew)
  * TIS-620 (Thai)
 .
 This library is a port of the auto-detection code in Mozilla.
Original-Maintainer: Piotr Ożarowski <piotr@debian.org>
Homepage: https://github.com/chardet/chardet

Package: libssl1.0.0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 3415
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: openssl1.0
Version: 1.0.2n-1ubuntu5.3
Depends: libc6 (>= 2.14), debconf (>= 0.5) | debconf-2.0
Description: Secure Sockets Layer toolkit - shared libraries
 This package is part of the OpenSSL project's implementation of the SSL
 and TLS cryptographic protocols for secure communication over the
 Internet.
 .
 It provides the libssl and libcrypto shared libraries.
Homepage: https://www.openssl.org
Original-Maintainer: Debian OpenSSL Team <pkg-openssl-devel@lists.alioth.debian.org>

Package: base-passwd
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 228
Maintainer: Colin Watson <cjwatson@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 3.5.44
Replaces: base
Depends: libc6 (>= 2.8), libdebconfclient0 (>= 0.145)
Recommends: debconf (>= 0.5) | debconf-2.0
Description: Debian base system master password and group files
 These are the canonical master copies of the user database files
 (/etc/passwd and /etc/group), containing the Debian-allocated user and
 group IDs. The update-passwd tool is provided to keep the system databases
 synchronized with these master files.

Package: libnghttp2-14
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 201
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: nghttp2
Version: 1.30.0-1ubuntu1
Depends: libc6 (>= 2.14)
Description: library implementing HTTP/2 protocol (shared library)
 This is an implementation of the Hypertext Transfer Protocol version
 2 in C. The framing layer of HTTP/2 is implemented as a reusable C
 library.
 .
 This package installs a shared library.
Homepage: https://nghttp2.org/
Original-Maintainer: Tomasz Buchert <tomasz@debian.org>

Package: liblz4-1
Status: install ok installed
Priority: extra
Section: libs
Installed-Size: 132
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: lz4
Version: 0.0~r131-2ubuntu3
Depends: libc6 (>= 2.14)
Description: Fast LZ compression algorithm library - runtime
 LZ4 is a very fast lossless compression algorithm, providing compression speed
 at 400 MB/s per core, scalable with multi-cores CPU. It also features an
 extremely fast decoder, with speed in multiple GB/s per core, typically
 reaching RAM speed limits on multi-core systems.
 .
 This package includes the shared library.
Homepage: https://github.com/Cyan4973/lz4
Original-Maintainer: Nobuhiro Iwamatsu <iwamatsu@debian.org>

Package: docutils-common
Status: install ok unpacked
Priority: optional
Section: python
Installed-Size: 639
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: python-docutils
Version: 0.14+dfsg-3
Depends: sgml-base (>= 1.28), xml-core (>= 0.14)
Recommends: python-docutils | python3-docutils
Conffiles:
 /etc/emacs/site-start.d/50python-docutils.el newconffile
 /etc/sgml/docutils-common.cat newconffile
Description: text processing system for reStructuredText - common data
 reStructuredText is an easy-to-read, what-you-see-is-what-you-get plaintext
 markup syntax and parser system. It is useful for in-line program documentation
 (such as Python docstrings), for quickly creating simple web pages, and for
 standalone documents.
 .
 The purpose of the Docutils project is to create a set of tools for
 processing reStructuredText documentation into useful formats, such as HTML,
 LaTeX, ODT or Unix manpages.
 .
 This package includes data and configuration files.
Original-Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Homepage: http://docutils.sourceforge.net/

Package: debianutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 212
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 4.8.4
Pre-Depends: libc6 (>= 2.15)
Description: Miscellaneous utilities specific to Debian
 This package provides a number of small utilities which are used
 primarily by the installation scripts of Debian packages, although
 you may use them directly.
 .
 The specific utilities included are:
 add-shell installkernel ischroot remove-shell run-parts savelog
 tempfile which
Original-Maintainer: Clint Adams <clint@debian.org>

Package: mime-support
Status: install ok installed
Priority: standard
Section: net
Installed-Size: 111
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 3.60ubuntu1
Recommends: bzip2, file, xz-utils
Conffiles:
 /etc/mime.types 4561fade4c4fc48e526e72871c470eec
 /etc/mailcap.order ba07e08a7fe3741d0b8339127963190e
Description: MIME files 'mime.types' & 'mailcap', and support programs
 As these files can be used by all MIME compliant programs, they
 have been moved into their own package that others can depend upon.
 .
 Other packages add themselves as viewers/editors/composers/etc by
 using the provided "update-mime" program.
 .
 In addition, the commands "see", "edit", "compose", and "print"
 will display, alter, create, and print (respectively) any file using
 a program determined from the entries in the mime.types and mailcap
 files.
Original-Maintainer: Mime-Support Maintainers <mime-support@plessy.org>

Package: python3
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 187
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: allowed
Source: python3-defaults
Version: 3.6.7-1~18.04
Replaces: python3-minimal (<< 3.1.2-2)
Provides: python3-profiler
Depends: python3.6 (>= 3.6.7-1~), libpython3-stdlib (= 3.6.7-1~18.04)
Pre-Depends: python3-minimal (= 3.6.7-1~18.04)
Suggests: python3-doc (>= 3.6.7-1~18.04), python3-tk (>= 3.6.7-1~), python3-venv (>= 3.6.7-1~18.04)
Description: interactive high-level object-oriented language (default python3 version)
 Python, the high-level, interactive object oriented language,
 includes an extensive class library with lots of goodies for
 network programming, system administration, sounds and graphics.
 .
 This package is a dependency package, which depends on Debian's default
 Python 3 version (currently v3.6).
Homepage: https://www.python.org/
Cnf-Extra-Commands: python
Cnf-Priority-Bonus: 5
Original-Maintainer: Matthias Klose <doko@debian.org>

Package: libwind0-heimdal
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 204
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: heimdal
Version: 7.5.0+dfsg-1
Depends: libc6 (>= 2.14), libcomerr2 (>= 1.01), libroken18-heimdal (>= 1.4.0+git20110226)
Description: Heimdal Kerberos - stringprep implementation
 Heimdal is a free implementation of Kerberos 5 that aims to be
 compatible with MIT Kerberos.
 .
 This package contains the stringprep library.
Original-Maintainer: Brian May <bam@debian.org>
Homepage: http://www.h5l.org/

Package: libgcrypt20
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 1213
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Version: 1.8.1-4ubuntu1.2
Depends: libc6 (>= 2.15), libgpg-error0 (>= 1.25)
Suggests: rng-tools
Description: LGPL Crypto library - runtime library
 libgcrypt contains cryptographic functions.  Many important free
 ciphers, hash algorithms and public key signing algorithms have been
 implemented:
 .
 Arcfour, Blowfish, CAST5, DES, AES, Twofish, Serpent, rfc2268 (rc2), SEED,
 Poly1305, Camellia, ChaCha20, IDEA, Salsa, Blake-2, CRC, MD2, MD4, MD5,
 RIPE-MD160, SHA-1, SHA-256, SHA-512, SHA3-224, SHA3-256, SHA3-384, SHA3-512,
 SHAKE128, SHAKE256, Tiger, Whirlpool, DSA, DSA2, ElGamal, RSA, ECC
 (Curve25519, sec256k1, GOST R 34.10-2001 and GOST R 34.10-2012, etc.)
Homepage: http://directory.fsf.org/project/libgcrypt/
Original-Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>

Package: python3-olefile
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 140
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: olefile
Version: 0.45.1-1
Depends: python3:any (>= 3.3.2-2~)
Description: Python module to read/write MS OLE2 files
 Python package to parse, read and write Microsoft OLE2 files (also called
 Structured Storage, Compound File Binary Format or Compound Document File
 Format), such as Microsoft Office 97-2003 documents, vbaProject.bin in
 MS Office 2007+ files, Image Composer and FlashPix files, Outlook MSG files,
 StickyNotes, several Microscopy file formats, McAfee antivirus quarantine
 files, etc.
Original-Maintainer: Matthias Klose <doko@debian.org>
Homepage: http://www.decalage.info/olefile

Package: libdw1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 776
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: elfutils
Version: 0.170-0.4ubuntu0.1
Depends: libbz2-1.0, libc6 (>= 2.14), libelf1 (= 0.170-0.4ubuntu0.1), liblzma5 (>= 5.1.1alpha+20120614), zlib1g (>= 1:1.2.2.3)
Description: library that provides access to the DWARF debug information
 libdw1 provides a library that provides access to DWARF debug information
 stored inside ELF files.
 .
 This library is part of elfutils.
Homepage: https://sourceware.org/elfutils/
Original-Maintainer: Kurt Roeckx <kurt@roeckx.be>

Package: libpng16-16
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 319
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libpng1.6
Version: 1.6.34-1ubuntu0.18.04.2
Depends: libc6 (>= 2.14), zlib1g (>= 1:1.2.11)
Description: PNG library - runtime (version 1.6)
 libpng is a library implementing an interface for reading and writing
 PNG (Portable Network Graphics) format files.
 .
 This package contains the runtime library files needed to run software
 using libpng.
Homepage: http://libpng.org/pub/png/libpng.html
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>

Package: libncursesw5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 343
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: ncurses
Version: 6.1-1ubuntu1.18.04
Depends: libtinfo5 (= 6.1-1ubuntu1.18.04), libc6 (>= 2.14)
Recommends: libgpm2
Description: shared libraries for terminal handling (wide character support)
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the shared libraries necessary to run programs
 compiled with ncursesw, which includes support for wide characters.
Homepage: https://invisible-island.net/ncurses/
Original-Maintainer: Craig Small <csmall@debian.org>

Package: curl
Status: install ok unpacked
Priority: optional
Section: web
Installed-Size: 387
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 7.58.0-2ubuntu3.8
Depends: libc6 (>= 2.17), libcurl4 (= 7.58.0-2ubuntu3.8), zlib1g (>= 1:1.1.4)
Description: command line tool for transferring data with URL syntax
 curl is a command line tool for transferring data with URL syntax, supporting
 DICT, FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3,
 POP3S, RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP.
 .
 curl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP form
 based upload, proxies, cookies, user+password authentication (Basic, Digest,
 NTLM, Negotiate, kerberos...), file transfer resume, proxy tunneling and a
 busload of other useful tricks.
Homepage: http://curl.haxx.se
Original-Maintainer: Alessandro Ghedini <ghedo@debian.org>

Package: nodejs
Status: install ok installed
Priority: optional
Section: javascript
Installed-Size: 18063
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 8.10.0~dfsg-2ubuntu0.4
Replaces: nodejs-legacy
Provides: nodejs-abi-57
Depends: libc-ares2 (>= 1.11.0~rc1), libc6 (>= 2.14), libgcc1 (>= 1:3.4), libhttp-parser2.7.1 (>= 2.7.1), libicu60 (>= 60.1-1~), libnghttp2-14 (>= 1.25.0), libssl1.0.0 (>= 1.0.2~beta3), libstdc++6 (>= 5.2), libuv1 (>= 1.18.0), zlib1g (>= 1:1.1.4)
Recommends: ca-certificates, nodejs-doc
Conflicts: nodejs-legacy
Description: evented I/O for V8 javascript
 Node.js is a platform built on Chrome's JavaScript runtime for easily
 building fast, scalable network applications. Node.js uses an
 event-driven, non-blocking I/O model that makes it lightweight and
 efficient, perfect for data-intensive real-time applications that run
 across distributed devices.
 .
 Node.js is bundled with several useful libraries to handle server
 tasks:
 .
 System, Events, Standard I/O, Modules, Timers, Child Processes, POSIX,
 HTTP, Multipart Parsing, TCP, DNS, Assert, Path, URL, Query Strings.
Homepage: http://nodejs.org/
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>

Package: bash
Essential: yes
Status: install ok installed
Priority: required
Section: shells
Installed-Size: 1588
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 4.4.18-2ubuntu1.2
Replaces: bash-completion (<< 20060301-0), bash-doc (<= 2.05-1)
Depends: base-files (>= 2.1.12), debianutils (>= 2.15)
Pre-Depends: libc6 (>= 2.15), libtinfo5 (>= 6)
Recommends: bash-completion (>= 20060301-0)
Suggests: bash-doc
Conflicts: bash-completion (<< 20060301-0)
Conffiles:
 /etc/bash.bashrc 3aa8b92d1dd6ddf4daaedc019662f1dc
 /etc/skel/.bash_logout 22bfb8c1dd94b5f3813a2b25da67463f
 /etc/skel/.bashrc 1f98b8f3f3c8f8927eca945d59dcc1c6
 /etc/skel/.profile f4e81ade7d6f9fb342541152d08e7a97
Description: GNU Bourne Again SHell
 Bash is an sh-compatible command language interpreter that executes
 commands read from the standard input or from a file.  Bash also
 incorporates useful features from the Korn and C shells (ksh and csh).
 .
 Bash is ultimately intended to be a conformant implementation of the
 IEEE POSIX Shell and Tools specification (IEEE Working Group 1003.2).
 .
 The Programmable Completion Code, by Ian Macdonald, is now found in
 the bash-completion package.
Homepage: http://tiswww.case.edu/php/chet/bash/bashtop.html
Original-Maintainer: Matthias Klose <doko@debian.org>

Package: libbinutils
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 3039
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: binutils
Version: 2.30-21ubuntu1~18.04.2
Replaces: binutils (<< 2.29-6)
Depends: libc6 (>= 2.14), zlib1g (>= 1:1.2.0), binutils-common (= 2.30-21ubuntu1~18.04.2)
Breaks: binutils (<< 2.29-6)
Description: GNU binary utilities (private shared library)
 This package includes the private shared libraries libbfd and libopcodes.
Homepage: https://www.gnu.org/software/binutils/
Original-Maintainer: Matthias Klose <doko@debian.org>

Package: liblcms2-2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 381
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: lcms2
Version: 2.9-1ubuntu0.1
Depends: libc6 (>= 2.14)
Suggests: liblcms2-utils
Description: Little CMS 2 color management library
 LittleCMS 2 intends to be a small-footprint color management engine, with
 special focus on accuracy and performance. It uses the International Color
 Consortium standard (ICC) of color management. LittleCMS 2 is a full
 implementation of ICC specification 4.2 plus all addendums. It fully supports
 all V2 and V4 profiles, including abstract, devicelink and named color
 profiles.
 .
 This package contains the shared library of liblcms2.
Homepage: http://www.littlecms.com/
Original-Maintainer: Thomas Weber <tweber@debian.org>

Package: python-openssl
Status: install ok unpacked
Priority: optional
Section: python
Installed-Size: 224
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: pyopenssl
Version: 17.5.0-1ubuntu1
Depends: python-cryptography (>= 2.1.4), python-six (>= 1.5.2), python:any (<< 2.8), python:any (>= 2.7.5-5~)
Suggests: python-openssl-doc, python-openssl-dbg
Description: Python 2 wrapper around the OpenSSL library
 High-level wrapper around a subset of the OpenSSL library, includes
 .
   * SSL.Connection objects, wrapping the methods of Python's portable
     sockets
   * Callbacks written in Python
   * Extensive error-handling mechanism, mirroring OpenSSL's error
     codes
 .
 A lot of the object methods do nothing more than calling a
 corresponding function in the OpenSSL library.
Homepage: https://pyopenssl.org/
Original-Maintainer: Sandro Tosi <morph@debian.org>

Package: libjbig0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 73
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: jbigkit
Version: 2.1-3.1build1
Depends: libc6 (>= 2.4)
Description: JBIGkit libraries
 JBIG-KIT provides a portable library of compression and decompression functions
 with a documented interface that you can include very easily into your image or
 document processing software.
 .
 This package contains the dynamically linked library.
Homepage: http://www.cl.cam.ac.uk/~mgk25/jbigkit/
Original-Maintainer: Michael van der Kolff <mvanderkolff@gmail.com>

Package: libuuid1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 116
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: util-linux
Version: 2.31.1-0.4ubuntu3.6
Replaces: e2fsprogs (<< 1.34-1)
Depends: libc6 (>= 2.25)
Recommends: uuid-runtime
Description: Universally Unique ID library
 The libuuid library generates and parses 128-bit Universally Unique
 IDs (UUIDs). A UUID is an identifier that is unique within the space
 of all such identifiers across both space and time. It can be used for
 multiple purposes, from tagging objects with an extremely short lifetime
 to reliably identifying very persistent objects across a network.
 .
 See RFC 4122 for more information.
Original-Maintainer: LaMont Jones <lamont@debian.org>

Package: libdb5.3
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 1729
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: db5.3
Version: 5.3.28-13.1ubuntu1.1
Depends: libc6 (>= 2.17)
Description: Berkeley v5.3 Database Libraries [runtime]
 This is the runtime package for programs that use the v5.3 Berkeley
 database library.
Homepage: http://www.oracle.com/technetwork/database/database-technologies/berkeleydb/overview/index.html
Original-Maintainer: Debian Berkeley DB Group <pkg-db-devel@lists.alioth.debian.org>

Package: libldap-common
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 97
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: openldap
Version: 2.4.45+dfsg-1ubuntu1.4
Replaces: libldap-2.4-2 (<< 2.4.44+dfsg-1)
Conffiles:
 /etc/ldap/ldap.conf 0b3f4d19d88498314478273ce10b0a70
Description: OpenLDAP common files for libraries
 These are common files for the run-time libraries for the OpenLDAP
 (Lightweight Directory Access Protocol) servers and clients.
Homepage: http://www.openldap.org/
Original-Maintainer: Debian OpenLDAP Maintainers <pkg-openldap-devel@lists.alioth.debian.org>

Package: fonts-dejavu-core
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 2954
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: fonts-dejavu
Version: 2.37-1
Replaces: ttf-dejavu (<< 2.20-1), ttf-dejavu-core (<< 2.33+svn2514-2~)
Breaks: ttf-dejavu (<< 2.20-1), ttf-dejavu-core (<< 2.33+svn2514-2~)
Conffiles:
 /etc/fonts/conf.avail/20-unhint-small-dejavu-lgc-sans-mono.conf 10d6f2176d76ee9b89a19a17811257f2
 /etc/fonts/conf.avail/20-unhint-small-dejavu-lgc-sans.conf 6488b24401e477e35aa71237054c8ada
 /etc/fonts/conf.avail/20-unhint-small-dejavu-lgc-serif.conf 0b01522fe76b4e5b8ab3d12383371348
 /etc/fonts/conf.avail/20-unhint-small-dejavu-sans-mono.conf 0cbf30e4580c5a8570da071ab12c5e4d
 /etc/fonts/conf.avail/20-unhint-small-dejavu-sans.conf f7df7bba810dd953dd78212900f4dcad
 /etc/fonts/conf.avail/20-unhint-small-dejavu-serif.conf e90c678d46f49bb9d6ba469b64e80c0c
 /etc/fonts/conf.avail/57-dejavu-sans-mono.conf d3e4d007a9ac6c47243b5994f1d195e3
 /etc/fonts/conf.avail/57-dejavu-sans.conf 29cfe6c581fe2dbc222525ce00097002
 /etc/fonts/conf.avail/57-dejavu-serif.conf 1dca2f4ec93842e94f3919f7e0c8f7a9
 /etc/fonts/conf.avail/58-dejavu-lgc-sans-mono.conf d2ee39274982cb4f831783cff742c8bc
 /etc/fonts/conf.avail/58-dejavu-lgc-sans.conf b4a8f51e45aa24fdee47b3f838cc0205
 /etc/fonts/conf.avail/58-dejavu-lgc-serif.conf 5f0b00e681b1f40b65dd336696ee0bbb
Description: Vera font family derivate with additional characters
 DejaVu provides an expanded version of the Vera font family aiming for
 quality and broader Unicode coverage while retaining the original Vera
 style. DejaVu currently works towards conformance with the Multilingual
 European Standards (MES-1 and MES-2) for Unicode coverage. The DejaVu
 fonts provide serif, sans and monospaced variants.
 .
 This package only contains the sans, sans-bold, serif, serif-bold,
 mono and mono-bold variants. For additional variants, see the
 ttf-dejavu-extra package.
 .
 DejaVu fonts are intended for use on low-resolution devices (mainly
 computer screens) but can be used in printing as well.
Original-Maintainer: Debian Fonts Task Force <pkg-fonts-devel@lists.alioth.debian.org>
Homepage: http://dejavu-fonts.org/

Package: libuv1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 183
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Version: 1.18.0-3
Depends: libc6 (>= 2.14)
Description: asynchronous event notification library - runtime library
 Libuv is the asynchronous library behind Node.js. Very similar to libevent or
 libev, it provides the main elements for event driven systems: watching and
 waiting for availability in a set of sockets, and some other events like timers
 or asynchronous messages. However, libuv also comes with some other extras
 like:
  * files watchers and asynchronous operations
  * a portable TCP and UDP API, as well as asynchronous DNS resolution
  * processes and threads management, and a portable inter-process
    communications mechanism, with pipes and work queues
  * a plugins mechanism for loading libraries dynamically
  * interface with external libraries that also need to access the I/O.
 .
 This package includes the dynamic library against which you can link
 your program.
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Homepage: https://github.com/libuv/libuv

Package: libreadline7
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 402
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: readline
Version: 7.0-3
Depends: readline-common, libc6 (>= 2.15), libtinfo5 (>= 6)
Description: GNU readline and history libraries, run-time libraries
 The GNU readline library aids in the consistency of user interface
 across discrete programs that need to provide a command line
 interface.
 .
 The GNU history library provides a consistent user interface for
 recalling lines of previously typed input.
Original-Maintainer: Matthias Klose <doko@debian.org>

Package: debconf
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 544
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 1.5.66ubuntu1
Replaces: debconf-tiny
Provides: debconf-2.0
Pre-Depends: perl-base (>= 5.20.1-3~)
Recommends: apt-utils (>= 0.5.1), debconf-i18n
Suggests: debconf-doc, debconf-utils, whiptail | dialog, libterm-readline-gnu-perl, libgtk3-perl, libnet-ldap-perl, perl, libqtgui4-perl, libqtcore4-perl
Breaks: apt-listchanges (<< 3.14), ubiquity (<< 17.10.2), update-notifier-common (<< 3.187~)
Conflicts: apt (<< 0.3.12.1), cdebconf (<< 0.96), debconf-tiny, debconf-utils (<< 1.3.22), dialog (<< 0.9b-20020814-1), menu (<= 2.1.3-1), whiptail (<< 0.51.4-11), whiptail-utf8 (<= 0.50.17-13)
Conffiles:
 /etc/apt/apt.conf.d/70debconf 7e9d09d5801a42b4926b736b8eeabb73
 /etc/debconf.conf 8c0619be413824f1fc7698cee0f23811
Description: Debian configuration management system
 Debconf is a configuration management system for debian packages. Packages
 use Debconf to ask questions when they are installed.
Original-Maintainer: Debconf Developers <debconf-devel@lists.alioth.debian.org>

Package: zlib1g
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 169
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: zlib
Version: 1:1.2.11.dfsg-0ubuntu2
Provides: libz1
Depends: libc6 (>= 2.14)
Breaks: libxml2 (<< 2.7.6.dfsg-2), texlive-binaries (<< 2009-12)
Conflicts: zlib1 (<= 1:1.0.4-7)
Description: compression library - runtime
 zlib is a library implementing the deflate compression method found
 in gzip and PKZIP.  This package includes the shared library.
Homepage: http://zlib.net/
Original-Maintainer: Mark Brown <broonie@debian.org>

Package: libcurl3-gnutls
Status: install ok unpacked
Priority: optional
Section: libs
Installed-Size: 622
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: curl
Version: 7.58.0-2ubuntu3.8
Depends: libc6 (>= 2.17), libgnutls30 (>= 3.5.6), libgssapi-krb5-2 (>= 1.14+dfsg), libidn2-0 (>= 0.6), libldap-2.4-2 (>= 2.4.7), libnettle6, libnghttp2-14 (>= 1.12.0), libpsl5 (>= 0.13.0), librtmp1 (>= 2.4+20131018.git79459a2-3~), zlib1g (>= 1:1.1.4)
Recommends: ca-certificates
Description: easy-to-use client-side URL transfer library (GnuTLS flavour)
 libcurl is an easy-to-use client-side URL transfer library, supporting DICT,
 FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3, POP3S,
 RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP.
 .
 libcurl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP
 form based upload, proxies, cookies, user+password authentication (Basic,
 Digest, NTLM, Negotiate, Kerberos), file transfer resume, http proxy tunneling
 and more!
 .
 libcurl is free, thread-safe, IPv6 compatible, feature rich, well supported,
 fast, thoroughly documented and is already used by many known, big and
 successful companies and numerous applications.
 .
 SSL support is provided by GnuTLS.
Homepage: http://curl.haxx.se
Original-Maintainer: Alessandro Ghedini <ghedo@debian.org>

Package: libpsl5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 74
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libpsl
Version: 0.19.1-5build1
Depends: libidn2-0 (>= 0.16), libc6 (>= 2.4), libunistring2 (>= 0.9.7)
Recommends: publicsuffix (>= 20150507)
Description: Library for Public Suffix List (shared libraries)
 Libpsl allows checking domains against the Public Suffix List.
 It can be used to avoid privacy-leaking 'super-cookies',
 'super domain' certificates, for domain highlighting purposes
 sorting domain lists by site and more.
 .
 Please see https://publicsuffix.org for more detailed information.
 .
 This package contains runtime libraries.
Original-Maintainer: Tim Rühsen <tim.ruehsen@gmx.de>
Homepage: https://github.com/rockdaboot/libpsl

Package: hostname
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 46
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 3.20
Replaces: nis (<< 3.17-30)
Pre-Depends: libc6 (>= 2.4)
Breaks: nis (<< 3.17-30)
Description: utility to set/show the host name or domain name
 This package provides commands which can be used to display the system's
 DNS name, and to display or set its hostname or NIS domain name.
Original-Maintainer: Michael Meskes <meskes@debian.org>

Package: libnuma1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 77
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: numactl
Version: 2.0.11-2.1ubuntu0.1
Depends: libc6 (>= 2.14)
Description: Libraries for controlling NUMA policy
 Library to control specific NUMA (Non-Uniform Memory Architecture)
 scheduling or memory placement policies.
Original-Maintainer: Ian Wienand <ianw@debian.org>
Homepage: http://oss.sgi.com/projects/libnuma/

Package: multiarch-support
Status: install ok installed
Priority: optional
Section: oldlibs
Installed-Size: 243
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: glibc
Version: 2.27-3ubuntu1
Depends: libc6 (>= 2.3.6-2)
Description: Transitional package to ensure multiarch compatibility
 This is a transitional package used to ensure multiarch support is present
 in ld.so before unpacking libraries to the multiarch directories.  It can
 be removed once nothing on the system depends on it.
Homepage: https://www.gnu.org/software/libc/libc.html
Original-Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>

Package: tzdata
Status: install ok installed
Priority: required
Section: localization
Installed-Size: 3034
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 2019c-0ubuntu0.18.04
Replaces: libc0.1, libc0.3, libc6, libc6.1
Provides: tzdata-buster
Depends: debconf (>= 0.5) | debconf-2.0
Description: time zone and daylight-saving time data
 This package contains data required for the implementation of
 standard local time for many representative locations around the
 globe. It is updated periodically to reflect changes made by
 political bodies to time zone boundaries, UTC offsets, and
 daylight-saving rules.
Homepage: https://www.iana.org/time-zones
Original-Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>

Package: libasn1-8-heimdal
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 782
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: heimdal
Version: 7.5.0+dfsg-1
Depends: libc6 (>= 2.14), libcomerr2 (>= 1.01), libroken18-heimdal (>= 1.4.0+git20110226)
Description: Heimdal Kerberos - ASN.1 library
 Heimdal is a free implementation of Kerberos 5 that aims to be
 compatible with MIT Kerberos.
 .
 This package contains the ASN.1 parser required for Heimdal.
Original-Maintainer: Brian May <bam@debian.org>
Homepage: http://www.h5l.org/

Package: mawk
Status: install ok installed
Priority: required
Section: interpreters
Installed-Size: 184
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1.3.3-17ubuntu3
Provides: awk
Pre-Depends: libc6 (>= 2.14)
Description: a pattern scanning and text processing language
 Mawk is an interpreter for the AWK Programming Language. The AWK
 language is useful for manipulation of data files, text retrieval and
 processing, and for prototyping and experimenting with algorithms. Mawk
 is a new awk meaning it implements the AWK language as defined in Aho,
 Kernighan and Weinberger, The AWK Programming Language, Addison-Wesley
 Publishing, 1988. (Hereafter referred to as the AWK book.) Mawk conforms
 to the POSIX 1003.2 (draft 11.3) definition of the AWK language
 which contains a few features not described in the AWK book, and mawk
 provides a small number of extensions.
 .
 Mawk is smaller and much faster than gawk. It has some compile-time
 limits such as NF = 32767 and sprintf buffer = 1020.
Original-Maintainer: Steve Langasek <vorlon@debian.org>

Package: gzip
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 229
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1.6-5ubuntu1
Depends: dpkg (>= 1.15.4) | install-info
Pre-Depends: libc6 (>= 2.17)
Suggests: less
Description: GNU compression utilities
 This package provides the standard GNU file compression utilities, which
 are also the default compression tools for Debian.  They typically operate
 on files with names ending in '.gz', but can also decompress files ending
 in '.Z' created with 'compress'.
Original-Maintainer: Bdale Garbee <bdale@gag.com>

Package: libelf1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 180
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: elfutils
Version: 0.170-0.4ubuntu0.1
Depends: libc6 (>= 2.14), zlib1g (>= 1:1.1.4)
Description: library to read and write ELF files
 The libelf1 package provides a shared library which allows reading and
 writing ELF files on a high level.  Third party programs depend on
 this package to read internals of ELF files.  The programs of the
 elfutils package use it also to generate new ELF files.
 .
 This library is part of elfutils.
Homepage: https://sourceware.org/elfutils/
Original-Maintainer: Kurt Roeckx <kurt@roeckx.be>

Package: gpgv
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 476
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: gnupg2
Version: 2.2.4-1ubuntu1.2
Replaces: gnupg2 (<< 2.0.21-2), gpgv2 (<< 2.1.11-7+exp1)
Depends: libbz2-1.0, libc6 (>= 2.14), libgcrypt20 (>= 1.8.0), libgpg-error0 (>= 1.14), zlib1g (>= 1:1.1.4)
Suggests: gnupg
Breaks: gnupg2 (<< 2.0.21-2), gpgv2 (<< 2.1.11-7+exp1), python-debian (<< 0.1.29)
Description: GNU privacy guard - signature verification tool
 GnuPG is GNU's tool for secure communication and data storage.
 .
 gpgv is actually a stripped-down version of gpg which is only able
 to check signatures. It is somewhat smaller than the fully-blown gpg
 and uses a different (and simpler) way to check that the public keys
 used to make the signature are valid. There are no configuration
 files and only a few options are implemented.
Homepage: https://www.gnupg.org/
Original-Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>

Package: python3-botocore
Status: install ok unpacked
Priority: optional
Section: python
Installed-Size: 26312
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-botocore
Version: 1.8.48+repack-1
Depends: python3-dateutil, python3-docutils, python3-jmespath, python3:any (>= 3.3.2-2~), python3-requests
Description: Low-level, data-driven core of boto 3 (Python 3)
 A low-level interface to a growing number of Amazon Web Services.
 The botocore package is the foundation for AWS-CLI.
 .
 This package contains the module for Python 3.
Original-Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Homepage: https://github.com/boto/botocore

Package: python3-idna
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 269
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-idna
Version: 2.6-1
Depends: python3:any (>= 3.3.2-2~)
Description: Python IDNA2008 (RFC 5891) handling (Python 3)
 A library to support the Internationalised Domain Names in Applications (IDNA)
 protocol as specified in RFC 5891. This version of the protocol is often
 referred to as “IDNA2008” and can produce different results from the earlier
 standard from 2003.
 .
 The library is also intended to act as a suitable drop-in replacement for the
 “encodings.idna” module that comes with the Python standard library but
 currently only supports the older 2003 specification.
 .
 This package contains the module for Python 3.
Original-Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Homepage: https://github.com/kjd/idna

Package: bsdutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 264
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: util-linux (2.31.1-0.4ubuntu3.6)
Version: 1:2.31.1-0.4ubuntu3.6
Replaces: bash-completion (<< 1:2.1-4.1~)
Pre-Depends: libc6 (>= 2.14), libsystemd0
Recommends: bsdmainutils
Breaks: bash-completion (<< 1:2.1-4.1~)
Description: basic utilities from 4.4BSD-Lite
 This package contains the bare minimum of BSD utilities needed for a
 Debian system: logger, renice, script, scriptreplay, and wall. The
 remaining standard BSD utilities are provided by bsdmainutils.
Original-Maintainer: LaMont Jones <lamont@debian.org>

Package: python-rdflib
Status: install ok unpacked
Priority: optional
Section: python
Installed-Size: 1240
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: rdflib
Version: 4.2.1-2
Provides: python2.7-rdflib
Depends: python-isodate, python-pyparsing, python:any (<< 2.8), python:any (>= 2.7.5-5~)
Recommends: python-sparqlwrapper (>= 1.7.6~), python-html5lib
Suggests: python-rdflib-doc, python-rdflib-tools
Description: Python library containing an RDF triple store and RDF parsers/serializers
 RDFLib is a Python library for working with the RDF W3C standard. The
 library contains RDF parsers/serializers and both in-memory and
 persistent Graph backend.
 .
 This package contains the Python 2 version of RDFLib.
Original-Maintainer: Christian M. Amsüss <chrysn@fsfe.org>
Homepage: https://github.com/RDFLib/rdflib

Package: libonig4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 511
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libonig
Version: 6.7.0-1
Depends: libc6 (>= 2.14)
Description: regular expressions library
 Oniguruma is a library for working with regular expressions.
 .
 Different character encoding for every regular expression object can
 be specified.
Original-Maintainer: Jörg Frings-Fürst <debian@jff.email>
Homepage: https://github.com/kkos/oniguruma

Package: dash
Essential: yes
Status: install ok installed
Priority: required
Section: shells
Installed-Size: 214
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 0.5.8-2.10
Depends: debianutils (>= 2.15), dpkg (>= 1.15.0)
Pre-Depends: libc6 (>= 2.14)
Description: POSIX-compliant shell
 The Debian Almquist Shell (dash) is a POSIX-compliant shell derived
 from ash.
 .
 Since it executes scripts faster than bash, and has fewer library
 dependencies (making it more robust against software or hardware
 failures), it is used as the default system shell on Debian systems.
Original-Maintainer: Gerrit Pape <pape@smarden.org>
Homepage: http://gondor.apana.org.au/~herbert/dash/

Package: libsasl2-modules-db
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 61
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: cyrus-sasl2
Version: 2.1.27~101-g0780600+dfsg-3ubuntu2.1
Depends: libc6 (>= 2.14), libdb5.3
Description: Cyrus SASL - pluggable authentication modules (DB)
 This is the Cyrus SASL API implementation, version 2.1. See package
 libsasl2-2 and RFC 2222 for more information.
 .
 This package provides the DB plugin, which supports Berkeley DB lookups.
Homepage: https://www.cyrusimap.org/
Original-Maintainer: Debian Cyrus SASL Team <pkg-cyrus-sasl2-debian-devel@lists.alioth.debian.org>

Package: libcurl4
Status: install ok unpacked
Priority: optional
Section: libs
Installed-Size: 627
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: curl
Version: 7.58.0-2ubuntu3.8
Replaces: libcurl3
Depends: libc6 (>= 2.17), libgssapi-krb5-2 (>= 1.14+dfsg), libidn2-0 (>= 0.6), libldap-2.4-2 (>= 2.4.7), libnghttp2-14 (>= 1.12.0), libpsl5 (>= 0.13.0), librtmp1 (>= 2.4+20131018.git79459a2-3~), libssl1.1 (>= 1.1.1), zlib1g (>= 1:1.1.4)
Recommends: ca-certificates
Conflicts: libcurl3
Description: easy-to-use client-side URL transfer library (OpenSSL flavour)
 libcurl is an easy-to-use client-side URL transfer library, supporting DICT,
 FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3, POP3S,
 RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP.
 .
 libcurl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP
 form based upload, proxies, cookies, user+password authentication (Basic,
 Digest, NTLM, Negotiate, Kerberos), file transfer resume, http proxy tunneling
 and more!
 .
 libcurl is free, thread-safe, IPv6 compatible, feature rich, well supported,
 fast, thoroughly documented and is already used by many known, big and
 successful companies and numerous applications.
 .
 SSL support is provided by OpenSSL.
Homepage: http://curl.haxx.se
Original-Maintainer: Alessandro Ghedini <ghedo@debian.org>

Package: python-mistune
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 64
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: mistune
Version: 0.8.3-2
Depends: python:any (<< 2.8), python:any (>= 2.7.5-5~)
Description: Markdown parser for Python 2
 A fast markdown parser in pure Python, inspired by marked, also providing
 renderer features.
 .
 This package installs the library for Python 2.
Original-Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Homepage: https://github.com/lepture/mistune

Package: python3-six
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 54
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: six
Version: 1.11.0-2
Depends: python3:any (>= 3.4~)
Description: Python 2 and 3 compatibility library (Python 3 interface)
 Six is a Python 2 and 3 compatibility library. It provides utility
 functions for smoothing over the differences between the Python versions
 with the goal of writing Python code that is compatible on both Python
 versions.
 .
 This package provides Six on the Python 3 module path. It is complemented
 by python-six and pypy-six.
Original-Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Homepage: https://pypi.python.org/pypi/six

Package: python-certifi
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 309
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 2018.1.18-2
Depends: python (<< 2.8), python (>= 2.7), python:any (>= 2.6.6-7~), ca-certificates
Description: root certificates for validating SSL certs and verifying TLS hosts
 Certifi is a carefully curated collection of Root Certificates for
 validating the trustworthiness of SSL certificates while verifying
 the identity of TLS hosts. It has been extracted from the Requests
 project.
 .
 The version of certifi in this Debian package is patched to return
 the location of Debian-provided CA certificates, instead of those
 packaged by upstream.
Original-Maintainer: Sebastien Delafond <seb@debian.org>
Homepage: https://certifi.io/en/latest/

Package: linux-libc-dev
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 5364
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: linux
Version: 4.15.0-96.97
Replaces: linux-kernel-headers
Provides: aufs-dev, linux-kernel-headers
Conflicts: linux-kernel-headers
Description: Linux Kernel Headers for development
 This package provides headers from the Linux kernel.  These headers
 are used by the installed headers for GNU glibc and other system
 libraries. They are NOT meant to be used to build third-party modules for
 your kernel. Use linux-headers-* packages for that.

Package: python3-colorama
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 65
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-colorama
Version: 0.3.7-1
Depends: python3:any (>= 3.4~)
Description: Cross-platform colored terminal text in Python - Python 3.x
 Python-colorama provides a simple cross-platform API to print colored terminal
 text from Python applications.
 .
 ANSI escape character sequences are commonly used to produce colored terminal
 text on Unix. Colorama provides some shortcuts to generate these sequences.
 .
 This has the happy side-effect that existing applications or libraries which
 already use ANSI sequences to produce colored output on Linux.
 .
 This package provides the module for Python 3.
Original-Maintainer: Khalid El Fathi <khalid@elfathi.fr>
Homepage: http://pypi.python.org/pypi/colorama/

Package: mount
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 370
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: util-linux
Version: 2.31.1-0.4ubuntu3.6
Replaces: bash-completion (<< 1:2.1-4.3~)
Depends: util-linux (>= 2.30.1-0ubuntu4~)
Pre-Depends: libblkid1 (>= 2.17.2), libc6 (>= 2.17), libmount1 (>= 2.30.2), libsmartcols1 (>= 2.27~rc1)
Suggests: nfs-common (>= 1:1.1.0-13)
Breaks: bash-completion (<< 1:2.1-4.3~)
Description: tools for mounting and manipulating filesystems
 This package provides the mount(8), umount(8), swapon(8),
 swapoff(8), and losetup(8) commands.
Important: yes
Original-Maintainer: LaMont Jones <lamont@debian.org>

Package: libhcrypto4-heimdal
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 270
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: heimdal
Version: 7.5.0+dfsg-1
Depends: libasn1-8-heimdal (>= 1.4.0+git20110226), libc6 (>= 2.14), libheimbase1-heimdal (>= 1.4.0+git20110226), libroken18-heimdal (>= 1.4.0+git20110226)
Description: Heimdal Kerberos - crypto library
 Heimdal is a free implementation of Kerberos 5 that aims to be
 compatible with MIT Kerberos.
 .
 This package contains the cryptographic library required for Heimdal.
Original-Maintainer: Brian May <bam@debian.org>
Homepage: http://www.h5l.org/

Package: libgnutls30
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 1712
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gnutls28
Version: 3.5.18-1ubuntu1.3
Depends: libc6 (>= 2.25), libgmp10 (>= 2:6), libhogweed4, libidn2-0 (>= 0.6), libnettle6, libp11-kit0 (>= 0.23.1), libtasn1-6 (>= 4.12), libunistring2 (>= 0.9.7), zlib1g (>= 1:1.1.4)
Suggests: gnutls-bin
Description: GNU TLS library - main runtime library
 GnuTLS is a portable library which implements the Transport Layer
 Security (TLS 1.0, 1.1, 1.2) and Secure Sockets Layer (SSL) 3.0 and Datagram
 Transport Layer Security (DTLS 1.0, 1.2) protocols.
 .
 GnuTLS features support for:
  - TLS extensions: server name indication, max record size, opaque PRF
    input, etc.
  - authentication using the SRP protocol.
  - authentication using both X.509 certificates and OpenPGP keys.
  - TLS Pre-Shared-Keys (PSK) extension.
  - Inner Application (TLS/IA) extension.
  - X.509 and OpenPGP certificate handling.
  - X.509 Proxy Certificates (RFC 3820).
  - all the strong encryption algorithms (including SHA-256/384/512 and
    Camellia (RFC 4132)).
 .
 This package contains the main runtime library.
Homepage: http://www.gnutls.org/
Original-Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>

Package: libsasl2-2
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 148
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: cyrus-sasl2
Version: 2.1.27~101-g0780600+dfsg-3ubuntu2.1
Replaces: libsasl2
Depends: libsasl2-modules-db (>= 2.1.27~101-g0780600+dfsg-3ubuntu2.1), libc6 (>= 2.15)
Recommends: libsasl2-modules (>= 2.1.27~101-g0780600+dfsg-3ubuntu2.1)
Breaks: postfix (<= 2.8.3-1), slapd (<= 2.4.25-3)
Description: Cyrus SASL - authentication abstraction library
 This is the Cyrus SASL API implementation, version 2.1.
 .
 SASL is the Simple Authentication and Security Layer, a method for
 adding authentication support to connection-based protocols. To use
 SASL, a protocol includes a command for identifying and
 authenticating a user to a server and for optionally negotiating
 protection of subsequent protocol interactions. If its use is
 negotiated, a security layer is inserted between the protocol and the
 connection. See RFC 2222 for more information.
 .
 Any of: ANONYMOUS, CRAM-MD5, DIGEST-MD5, GSSAPI (MIT or Heimdal
 Kerberos 5), NTLM, OTP, PLAIN, or LOGIN can be used.
Homepage: https://www.cyrusimap.org/
Original-Maintainer: Debian Cyrus SASL Team <pkg-cyrus-sasl2-debian-devel@lists.alioth.debian.org>

Package: libsystemd0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 652
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: systemd
Version: 237-3ubuntu10.39
Pre-Depends: libc6 (>= 2.27), libgcrypt20 (>= 1.8.0), liblz4-1 (>= 0.0~r113), liblzma5 (>= 5.1.1alpha+20120614)
Description: systemd utility library
 The libsystemd0 library provides interfaces to various systemd components.
Homepage: https://www.freedesktop.org/wiki/Software/systemd
Original-Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>

Package: libzstd1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 519
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libzstd
Version: 1.3.3+dfsg-2ubuntu1.1
Depends: libc6 (>= 2.14)
Description: fast lossless compression algorithm
 Zstd, short for Zstandard, is a fast lossless compression algorithm, targeting
 real-time compression scenarios at zlib-level compression ratio.
 .
 This package contains the shared library.
Homepage: https://github.com/facebook/zstd
Original-Maintainer: Debian Med Packaging Team <debian-med-packaging@lists.alioth.debian.org>

Package: python3.6-minimal
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 8966
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: allowed
Source: python3.6
Version: 3.6.9-1~18.04
Depends: libpython3.6-minimal (= 3.6.9-1~18.04), libexpat1 (>= 2.1~beta3), zlib1g (>= 1:1.2.0)
Pre-Depends: libc6 (>= 2.25)
Recommends: python3.6
Suggests: binfmt-support
Conflicts: binfmt-support (<< 1.1.2)
Description: Minimal subset of the Python language (version 3.6)
 This package contains the interpreter and some essential modules.  It can
 be used in the boot process for some basic tasks.
 See /usr/share/doc/python3.6-minimal/README.Debian for a list of the modules
 contained in this package.
Original-Maintainer: Matthias Klose <doko@debian.org>

Package: libc6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 11877
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: glibc
Version: 2.27-3ubuntu1
Replaces: libc6-amd64
Depends: libgcc1
Suggests: glibc-doc, debconf | debconf-2.0, locales
Breaks: hurd (<< 1:0.5.git20140203-1), libtirpc1 (<< 0.2.3), locales (<< 2.27), locales-all (<< 2.27), nscd (<< 2.27)
Conflicts: openrc (<< 0.27-2~)
Conffiles:
 /etc/ld.so.conf.d/x86_64-linux-gnu.conf d4e7a7b88a71b5ffd9e2644e71a0cfab
Description: GNU C Library: Shared libraries
 Contains the standard libraries that are used by nearly all programs on
 the system. This package includes shared versions of the standard C library
 and the standard math library, as well as many others.
Homepage: https://www.gnu.org/software/libc/libc.html
Original-Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>

Package: python2.7
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 382
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: allowed
Version: 2.7.17-1~18.04
Replaces: python-profiler (<= 2.7.1-2), python2.7-minimal (<< 2.7.3-7~)
Depends: python2.7-minimal (= 2.7.17-1~18.04), libpython2.7-stdlib (= 2.7.17-1~18.04), mime-support
Suggests: python2.7-doc, binutils
Breaks: python-virtualenv (<< 1.7.1.2-2~), vim-athena (<< 2:7.3.547-4), vim-gnome (<< 2:7.3.547-4), vim-gtk (<< 2:7.3.547-4), vim-nox (<< 2:7.3.547-4)
Conflicts: python-profiler (<= 2.7.1-2)
Description: Interactive high-level object-oriented language (version 2.7)
 Python is a high-level, interactive, object-oriented language. Its 2.7 version
 includes an extensive class library with lots of goodies for
 network programming, system administration, sounds and graphics.
Original-Maintainer: Matthias Klose <doko@debian.org>

Package: python-sparqlwrapper
Status: install ok unpacked
Priority: optional
Section: python
Installed-Size: 94
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: sparql-wrapper-python
Version: 1.7.6-2
Depends: python-rdflib, python:any (<< 2.8), python:any (>= 2.7.5-5~)
Description: SPARQL endpoint interface to Python
 This is a wrapper around a SPARQL service. It helps in
 creating the query URI and, possibly, convert the
 result into a more manageable format.
 .
 This is the Python 2 version of the package.
Original-Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Homepage: http://rdflib.github.io/sparqlwrapper/

Package: python3-certifi
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 308
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-certifi
Version: 2018.1.18-2
Depends: python3:any (>= 3.4~), ca-certificates
Description: root certificates for validating SSL certs and verifying TLS hosts (python3)
 Certifi is a carefully curated collection of Root Certificates for
 validating the trustworthiness of SSL certificates while verifying
 the identity of TLS hosts. It has been extracted from the Requests
 project.
 .
 The version of certifi in this Debian package is patched to return
 the location of Debian-provided CA certificates, instead of those
 packaged by upstream.
 .
 This is the python3 package.
Original-Maintainer: Sebastien Delafond <seb@debian.org>
Homepage: https://certifi.io/en/latest/

Package: distro-info-data
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 16
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 0.37ubuntu0.6
Replaces: distro-info (<< 0.3~)
Breaks: distro-info (<< 0.18ubuntu0.18.04.1~)
Description: information about the distributions' releases (data files)
 Information about all releases of Debian and Ubuntu. The distro-info script
 will give you the codename for e.g. the latest stable release of your
 distribution. To get information about a specific distribution there are the
 debian-distro-info and the ubuntu-distro-info scripts.
 .
 This package contains the data files.
Original-Maintainer: Benjamin Drung <bdrung@debian.org>

Package: libtiff5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 515
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: tiff
Version: 4.0.9-5ubuntu0.3
Depends: libc6 (>= 2.14), libjbig0 (>= 2.0), libjpeg8 (>= 8c), liblzma5 (>= 5.1.1alpha+20120614), zlib1g (>= 1:1.1.4)
Description: Tag Image File Format (TIFF) library
 libtiff is a library providing support for the Tag Image File Format
 (TIFF), a widely used format for storing image data.  This package
 includes the shared library.
Homepage: http://libtiff.maptools.org
Original-Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>

Package: python-avro
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 132
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.8.2+dfsg-1
Depends: python:any (<< 2.8), python:any (>= 2.7.5-5~)
Description: Apache Avro serialization system — Python 2 library
 Apache Avro is a data serialization system providing
  * Rich data structures.
  * A compact, fast, binary data format.
  * A container file, to store persistent data.
  * Remote procedure call (RPC).
  * Simple integration with dynamic languages. Code generation is not
    required to read or write data files nor to use or implement RPC protocols.
    Code generation as an optional optimization, only worth implementing for
    statically typed languages.
 .
 This package installs the implementation as a Python 2 library.
Original-Maintainer: Debian Med Packaging Team <debian-med-packaging@lists.alioth.debian.org>
Homepage: http://avro.apache.org

Package: libfdisk1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 508
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: util-linux
Version: 2.31.1-0.4ubuntu3.6
Depends: libblkid1 (>= 2.24.2), libc6 (>= 2.25), libuuid1 (>= 2.16)
Description: fdisk partitioning library
 The libfdisk library is used for manipulating partition tables. It is
 the core of the fdisk, cfdisk, and sfdisk tools.
Original-Maintainer: LaMont Jones <lamont@debian.org>

Package: libjpeg-turbo8
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 446
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libjpeg-turbo
Version: 1.5.2-0ubuntu5.18.04.3
Replaces: libjpeg8 (<< 8c-2ubuntu5)
Depends: libc6 (>= 2.14)
Pre-Depends: multiarch-support
Breaks: libjpeg8 (<< 8c-2ubuntu5)
Description: IJG JPEG compliant runtime library.
 Runtime library supporting the Independent JPEG Group's standard
 for JPEG files.
 .
 This package contains the shared library which is a drop in
 replacement for libjpeg8, which has better performance than
 standard libjpeg by use of SIMD and other optimizations.
Homepage: http://libjpeg-turbo.virtualgl.org/

Package: libroken18-heimdal
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 137
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: heimdal
Version: 7.5.0+dfsg-1
Depends: libc6 (>= 2.16)
Description: Heimdal Kerberos - roken support library
 Heimdal is a free implementation of Kerberos 5 that aims to be
 compatible with MIT Kerberos.
 .
 This package contains the library for roken support.
Original-Maintainer: Brian May <bam@debian.org>
Homepage: http://www.h5l.org/

Package: libpcre3
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 665
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: pcre3
Version: 2:8.39-9
Depends: libc6 (>= 2.14)
Breaks: approx (<< 4.4-1~), cduce (<< 0.5.3-2~), cmigrep (<< 1.5-7~), galax (<< 1.1-7~), libpcre-ocaml (<< 6.0.1~), liquidsoap (<< 0.9.2-3~), ocsigen (<< 1.3.3-1~)
Conflicts: libpcre3-dev (<= 4.3-3)
Description: Old Perl 5 Compatible Regular Expression Library - runtime files
 This is a library of functions to support regular expressions whose syntax
 and semantics are as close as possible to those of the Perl 5 language.
 .
 New packages should use the newer pcre2 packages, and existing
 packages should migrate to pcre2.
 .
 This package contains the runtime libraries.
Original-Maintainer: Matthew Vernon <matthew@debian.org>

Package: librtmp1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 131
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: rtmpdump
Version: 2.4+20151223.gitfa8646d.1-1
Depends: libc6 (>= 2.14), libgmp10, libgnutls30 (>= 3.4.2), libhogweed4, libnettle6, zlib1g (>= 1:1.1.4)
Description: toolkit for RTMP streams (shared library)
 A small dumper for media content streamed over the RTMP protocol (like BBC's
 iPlayer high quality streams). Supplying an RTMP URL will result in a dumped
 flv file, which can be played/transcoded with standard tools.
 .
 This package contains the shared libraries, header files needed by
 programs that want to use librtmp.
Original-Maintainer: Debian Multimedia Maintainers <pkg-multimedia-maintainers@lists.alioth.debian.org>
Homepage: http://rtmpdump.mplayerhq.hu/

Package: perl-modules-5.26
Status: install ok installed
Priority: standard
Section: perl
Installed-Size: 18501
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: perl
Version: 5.26.1-6ubuntu0.3
Replaces: libansicolor-perl (<< 4.06), libarchive-tar-perl (<< 2.24), libattribute-handlers-perl (<< 0.99), libautodie-perl (<< 2.29-2), libcpan-meta-perl (<< 2.150010), libcpan-meta-requirements-perl (<< 2.140), libcpan-meta-yaml-perl (<< 0.018), libdigest-perl (<< 1.17.01), libexperimental-perl (<< 0.016), libextutils-cbuilder-perl (<< 0.280225), libextutils-command-perl (<< 7.24), libextutils-install-perl (<< 2.04), libextutils-parsexs-perl (<< 3.340000), libfile-spec-perl (<< 3.6700), libhttp-tiny-perl (<< 0.070), libi18n-langtags-perl (<< 0.42), libio-zlib-perl (<< 1.10), libjson-pp-perl (<< 2.27400.02), liblocale-codes-perl (<< 3.42), liblocale-maketext-perl (<< 1.28), liblocale-maketext-simple-perl (<< 0.21.01), libmath-bigint-perl (<< 1.999806), libmath-complex-perl (<< 1.5901), libmodule-corelist-perl (<< 5.20170922.26), libmodule-load-conditional-perl (<< 0.68), libmodule-load-perl (<< 0.32), libmodule-metadata-perl (<< 1.000033), libnet-perl (<< 1:3.10), libnet-ping-perl (<< 2.55), libparams-check-perl (<< 0.38), libparent-perl (<< 0.236), libparse-cpan-meta-perl (<< 2.150010), libperl-ostype-perl (<< 1.010), libpod-escapes-perl (<< 1.07), libpod-parser-perl (<< 1.63), libpod-simple-perl (<< 3.35), libtest-harness-perl (<< 3.38), libtest-simple-perl (<< 1.302073), libtest-tester-perl (<< 1.302073), libtest-use-ok-perl (<< 1.302073), libthread-queue-perl (<< 3.12), libtime-local-perl (<< 1.2500), libunicode-collate-perl (<< 1.19), libversion-perl (<< 1:0.9917), perl-base (<< 5.22.0~), perl-modules, podlators-perl (<< 4.09)
Provides: libansicolor-perl, libarchive-tar-perl, libattribute-handlers-perl, libautodie-perl, libcpan-meta-perl, libcpan-meta-requirements-perl, libcpan-meta-yaml-perl, libdigest-perl, libexperimental-perl, libextutils-cbuilder-perl, libextutils-command-perl, libextutils-install-perl, libextutils-parsexs-perl, libfile-spec-perl, libhttp-tiny-perl, libi18n-langtags-perl, libio-zlib-perl, libjson-pp-perl, liblocale-codes-perl, liblocale-maketext-perl, liblocale-maketext-simple-perl, libmath-bigint-perl, libmath-complex-perl, libmodule-corelist-perl, libmodule-load-conditional-perl, libmodule-load-perl, libmodule-metadata-perl, libnet-perl, libnet-ping-perl, libparams-check-perl, libparent-perl, libparse-cpan-meta-perl, libperl-ostype-perl, libpod-escapes-perl, libpod-parser-perl, libpod-simple-perl, libtest-harness-perl, libtest-simple-perl, libtest-tester-perl, libtest-use-ok-perl, libthread-queue-perl, libtime-local-perl, libunicode-collate-perl, libversion-perl, libversion-requirements-perl, perl-modules, podlators-perl
Depends: perl-base (>= 5.26.1-1)
Pre-Depends: dpkg (>= 1.17.17)
Recommends: perl (>= 5.26.1-1)
Breaks: cli-common (<< 0.9+nmu1), libansicolor-perl (<< 4.06), libarchive-tar-perl (<< 2.24), libattribute-handlers-perl (<< 0.99), libautodie-perl (<< 2.29-2), libcpan-meta-perl (<< 2.150010), libcpan-meta-requirements-perl (<< 2.140), libcpan-meta-yaml-perl (<< 0.018), libdigest-perl (<< 1.17.01), libexperimental-perl (<< 0.016), libextutils-cbuilder-perl (<< 0.280225), libextutils-command-perl (<< 7.24), libextutils-install-perl (<< 2.04), libextutils-parsexs-perl (<< 3.340000), libfile-spec-perl (<< 3.6700), libhttp-tiny-perl (<< 0.070), libi18n-langtags-perl (<< 0.42), libio-zlib-perl (<< 1.10), libjson-pp-perl (<< 2.27400.02), liblocale-codes-perl (<< 3.42), liblocale-maketext-perl (<< 1.28), liblocale-maketext-simple-perl (<< 0.21.01), libmath-bigint-perl (<< 1.999806), libmath-complex-perl (<< 1.5901), libmodule-corelist-perl (<< 5.20170922.26), libmodule-load-conditional-perl (<< 0.68), libmodule-load-perl (<< 0.32), libmodule-metadata-perl (<< 1.000033), libnet-perl (<< 1:3.10), libnet-ping-perl (<< 2.55), libparams-check-perl (<< 0.38), libparent-perl (<< 0.236), libparse-cpan-meta-perl (<< 2.150010), libperl-ostype-perl (<< 1.010), libpod-escapes-perl (<< 1.07), libpod-parser-perl (<< 1.63), libpod-simple-perl (<< 3.35), libtest-harness-perl (<< 3.38), libtest-simple-perl (<< 1.302073), libtest-tester-perl (<< 1.302073), libtest-use-ok-perl (<< 1.302073), libthread-queue-perl (<< 3.12), libtime-local-perl (<< 1.2500), libunicode-collate-perl (<< 1.19), libversion-perl (<< 1:0.9917), maildirsync (<< 1.2-2.1), mono-apache-server2 (<< 3.8-2.1), mono-apache-server4 (<< 3.8-2.1), mono-fastcgi-server2 (<< 3.8-2.1), mono-fastcgi-server4 (<< 3.8-2.1), patcher (<< 0.0.20040521-6.1), pdl (<< 1:2.007-4), perl (<< 5.26.1~), podlators-perl (<< 4.09), polygen-data (<< 1.0.6.ds2-13.1), pristine-tar (<< 1.33), pure-ftpd-common (<< 1.0.36-3.2), rinse (<< 3.0.7), shorewall (<< 4.6.4.3-2), shorewall-core (<< 4.6.4.3-2), tvtime (<< 1.0.2-14)
Conflicts: defoma (<< 0.11.12), mono-gac (<< 2.10.8.1-3), perl-modules (<< 5.22.0~)
Description: Core Perl modules
 Architecture independent Perl modules.  These modules are part of Perl and
 required if the `perl' package is installed.
 .
 Note that this package only exists to save archive space and should be
 considered an internal implementation detail of the `perl' package.
 Other packages should not depend on `perl-modules-5.26' directly, they
 should use `perl' (which depends on `perl-modules-5.26') instead.
Homepage: http://dev.perl.org/perl5/
Original-Maintainer: Niko Tyni <ntyni@debian.org>

Package: sgml-base
Status: install ok triggers-pending
Priority: optional
Section: text
Installed-Size: 69
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 1.29
Pre-Depends: dpkg (>= 1.16.4)
Suggests: sgml-base-doc
Description: SGML infrastructure and SGML catalog file support
 This package creates the SGML infrastructure directories and provides
 SGML catalog file support in compliance with the current Debian SGML
 Policy draft:
 .
   * infrastructure directories:
      - /etc/sgml
      - /usr/share/sgml/{declaration,dtd,entities,misc,stylesheet}
      - /usr/share/local/sgml/{declaration,dtd,entities,misc,stylesheet}
 .
   * update-catalog(8): tool for maintaining the root SGML catalog
     file and the package SGML catalog files in the '/etc/sgml' directory.
Triggers-Pending: /etc/sgml update-sgmlcatalog
Original-Maintainer: Debian QA Group <packages@qa.debian.org>

Package: python3-pkg-resources
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 517
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: python-setuptools
Version: 39.0.1-2
Depends: python3:any (>= 3.3.2-2~)
Suggests: python3-setuptools
Description: Package Discovery and Resource Access using pkg_resources
 The pkg_resources module provides an API for Python libraries to
 access their resource files, and for extensible applications and
 frameworks to automatically discover plugins.  It also provides
 runtime support for using C extensions that are inside zipfile-format
 eggs, support for merging packages that have separately-distributed
 modules or subpackages, and APIs for managing Python's current
 "working set" of active packages.
Original-Maintainer: Matthias Klose <doko@debian.org>
Homepage: https://pypi.python.org/pypi/setuptools

Package: libgdbm5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 77
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gdbm
Version: 1.14.1-6
Depends: libc6 (>= 2.14)
Suggests: gdbm-l10n (= 1.14.1-6)
Description: GNU dbm database routines (runtime version) 
 GNU dbm ('gdbm') is a library of database functions that use extendible
 hashing and works similarly to the standard UNIX 'dbm' functions.
 .
 The basic use of 'gdbm' is to store key/data pairs in a data file, thus
 providing a persistent version of the 'dictionary' Abstract Data Type
 ('hash' to perl programmers).
Original-Maintainer: Dmitry Bogatov <KAction@gnu.org>
Homepage: https://gnu.org/software/gdbm

Package: python-pkg-resources
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 545
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: python-setuptools
Version: 39.0.1-2
Depends: python:any (<< 2.8), python:any (>= 2.7.5-5~)
Suggests: python-setuptools
Description: Package Discovery and Resource Access using pkg_resources
 The pkg_resources module provides an API for Python libraries to
 access their resource files, and for extensible applications and
 frameworks to automatically discover plugins.  It also provides
 runtime support for using C extensions that are inside zipfile-format
 eggs, support for merging packages that have separately-distributed
 modules or subpackages, and APIs for managing Python's current
 "working set" of active packages.
Original-Maintainer: Matthias Klose <doko@debian.org>
Homepage: https://pypi.python.org/pypi/setuptools

Package: lsb-release
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 65
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: lsb
Version: 9.20170808ubuntu1
Depends: python3:any (>= 3.4~), distro-info-data
Recommends: apt
Suggests: lsb
Description: Linux Standard Base version reporting utility
 The Linux Standard Base (http://www.linuxbase.org/) is a standard
 core system that third-party applications written for Linux can
 depend upon.
 .
 The lsb-release command is a simple tool to help identify the Linux
 distribution being used and its compliance with the Linux Standard Base.
 LSB conformance will not be reported unless the required metapackages are
 installed.
 .
 While it is intended for use by LSB packages, this command may also
 be useful for programmatically distinguishing between a pure Debian
 installation and derived distributions.
Homepage: https://wiki.linuxfoundation.org/lsb/start
Original-Maintainer: Debian LSB Team <debian-lsb@lists.debian.org>

Package: coreutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 6560
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 8.28-1ubuntu1
Pre-Depends: libacl1 (>= 2.2.51-8), libattr1 (>= 1:2.4.46-8), libc6 (>= 2.25), libselinux1 (>= 2.1.13)
Description: GNU core utilities
 This package contains the basic file, shell and text manipulation
 utilities which are expected to exist on every operating system.
 .
 Specifically, this package includes:
 arch base64 basename cat chcon chgrp chmod chown chroot cksum comm cp
 csplit cut date dd df dir dircolors dirname du echo env expand expr
 factor false flock fmt fold groups head hostid id install join link ln
 logname ls md5sum mkdir mkfifo mknod mktemp mv nice nl nohup nproc numfmt
 od paste pathchk pinky pr printenv printf ptx pwd readlink realpath rm
 rmdir runcon sha*sum seq shred sleep sort split stat stty sum sync tac
 tail tee test timeout touch tr true truncate tsort tty uname unexpand
 uniq unlink users vdir wc who whoami yes
Homepage: http://gnu.org/software/coreutils
Original-Maintainer: Michael Stone <mstone@debian.org>

Package: file
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 80
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1:5.32-2ubuntu0.3
Depends: libc6 (>= 2.4), libmagic1 (= 1:5.32-2ubuntu0.3)
Description: Recognize the type of data in a file using "magic" numbers
 The file command is "a file type guesser", a command-line tool that
 tells you in words what kind of data a file contains.
 .
 This package contains the file program itself.
Homepage: http://www.darwinsys.com/file/
Original-Maintainer: Christoph Biedl <debian.axhn@manchmal.in-ulm.de>

Package: e2fsprogs
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 1227
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1.44.1-1ubuntu1.3
Pre-Depends: libblkid1 (>= 2.17.2), libc6 (>= 2.14), libcom-err2 (>= 1.42~WIP-2011-10-05-1), libext2fs2 (= 1.44.1-1ubuntu1.3), libss2 (>= 1.34-1), libuuid1 (>= 2.16)
Recommends: e2fsprogs-l10n
Suggests: gpart, parted, fuse2fs, e2fsck-static
Conffiles:
 /etc/mke2fs.conf 72b349d890a9b5cca06c7804cd0c8d1d
Description: ext2/ext3/ext4 file system utilities
 The ext2, ext3 and ext4 file systems are successors of the original ext
 ("extended") file system. They are the main file system types used for
 hard disks on Debian and other Linux systems.
 .
 This package contains programs for creating, checking, and maintaining
 ext2/3/4-based file systems.  It also includes the "badblocks" program,
 which can be used to scan for bad blocks on a disk or other storage device.
Homepage: http://e2fsprogs.sourceforge.net
Original-Maintainer: Theodore Y. Ts'o <tytso@mit.edu>

Package: tar
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 868
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1.29b-2ubuntu0.1
Replaces: cpio (<< 2.4.2-39)
Pre-Depends: libacl1 (>= 2.2.51-8), libc6 (>= 2.17), libselinux1 (>= 1.32)
Suggests: bzip2, ncompress, xz-utils, tar-scripts, tar-doc
Breaks: dpkg-dev (<< 1.14.26)
Conflicts: cpio (<= 2.4.2-38)
Conffiles:
 /etc/rmt 3c58b7cd13da1085eff0acc6a00f43c7
Description: GNU version of the tar archiving utility
 Tar is a program for packaging a set of files as a single archive in tar
 format.  The function it performs is conceptually similar to cpio, and to
 things like PKZIP in the DOS world.  It is heavily used by the Debian package
 management system, and is useful for performing system backups and exchanging
 sets of files with others.
Original-Maintainer: Bdale Garbee <bdale@gag.com>

Package: libkrb5support0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 155
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: krb5
Version: 1.16-2ubuntu0.1
Depends: libc6 (>= 2.14)
Breaks: libgssapi-krb5-2 (<< 1.13~alpha1-1), libk5crypto3 (<< 1.16), libkadm5clnt-mit9 (<< 1.13~alpha1-1), libkadm5srv-mit9 (<< 1.13~alpha1-1), libkdb5-8 (<< 1.16)
Description: MIT Kerberos runtime libraries - Support library
 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service.  That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains an internal runtime support library used by other
 Kerberos libraries.
Homepage: http://web.mit.edu/kerberos/
Original-Maintainer: Sam Hartman <hartmans@debian.org>

Package: libprocps6
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 118
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: procps
Version: 2:3.3.12-3ubuntu1.2
Replaces: procps (<< 1:3.3.2-1)
Depends: libc6 (>= 2.14), libsystemd0 (>= 209)
Description: library for accessing process information from /proc
 The libprocps library is a way of accessing information out of the /proc
 filesystem.
 .
 This package contains the shared libraries necessary to run programs
 compiled with libprocps.
Homepage: https://gitlab.com/procps-ng/procps
Original-Maintainer: Craig Small <csmall@debian.org>

Package: libhx509-5-heimdal
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 348
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: heimdal
Version: 7.5.0+dfsg-1
Depends: libasn1-8-heimdal (>= 1.4.0+git20110226), libc6 (>= 2.14), libcomerr2 (>= 1.34), libhcrypto4-heimdal (>= 1.4.0+git20110226), libheimbase1-heimdal (>= 1.6~git20131117), libroken18-heimdal (>= 1.7~git20150920), libwind0-heimdal (>= 1.4.0+git20110226)
Description: Heimdal Kerberos - X509 support library
 Heimdal is a free implementation of Kerberos 5 that aims to be
 compatible with MIT Kerberos.
 .
 This package contains the x509 supportlibrary.
Original-Maintainer: Brian May <bam@debian.org>
Homepage: http://www.h5l.org/

Package: libbz2-1.0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 90
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: bzip2
Version: 1.0.6-8.1ubuntu0.2
Depends: libc6 (>= 2.4)
Description: high-quality block-sorting file compressor library - runtime
 This package contains libbzip2 which is used by the bzip2 compressor.
 .
 bzip2 is a freely available, patent free, high-quality data compressor.
 It typically compresses files to within 10% to 15% of the best available
 techniques, whilst being around twice as fast at compression and six
 times faster at decompression.
 .
 bzip2 compresses files using the Burrows-Wheeler block-sorting text
 compression algorithm, and Huffman coding. Compression is generally
 considerably better than that achieved by more conventional
 LZ77/LZ78-based compressors, and approaches the performance of the PPM
 family of statistical compressors.
 .
 The archive file format of bzip2 (.bz2) is incompatible with that of its
 predecessor, bzip (.bz).
Homepage: http://www.bzip.org/
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>

Package: ucf
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 183
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 3.0038
Depends: debconf (>= 1.5.19), coreutils (>= 5.91), sensible-utils
Conffiles:
 /etc/ucf.conf 5565b8b26108c49ba575ba452cd69b3e
Description: Update Configuration File(s): preserve user changes to config files
 Debian policy mandates that user changes to configuration files must be
 preserved during package upgrades. The easy way to achieve this behavior
 is to make the configuration file a 'conffile', in which case dpkg
 handles the file specially during upgrades, prompting the user as
 needed.
 .
 This is appropriate only if it is possible to distribute a default
 version that will work for most installations, although some system
 administrators may choose to modify it. This implies that the
 default version will be part of the package distribution, and must
 not be modified by the maintainer scripts during installation (or at
 any other time).
 .
 This script attempts to provide conffile-like handling for files that
 may not be labelled conffiles, and are not shipped in a Debian package,
 but handled by the postinst instead. This script allows one to
 maintain files in /etc, preserving user changes and in general
 offering the same facilities while upgrading that dpkg normally
 provides for 'conffiles'.
 .
 Additionally, this script provides facilities for transitioning a
 file that had not been provided with conffile-like protection to come
 under this schema, and attempts to minimize questions asked at
 installation time. Indeed, the transitioning facility is better than the
 one offered by dpkg while transitioning a file from a non-conffile to
 conffile status.
Original-Maintainer: Manoj Srivastava <srivasta@debian.org>

Package: libblkid1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 398
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: util-linux
Version: 2.31.1-0.4ubuntu3.6
Depends: libc6 (>= 2.25), libuuid1 (>= 2.16)
Description: block device ID library
 The blkid library allows system programs such as fsck and mount to
 quickly and easily find block devices by filesystem UUID or label.
 This allows system administrators to avoid specifying filesystems by
 hard-coded device names and use a logical naming system instead.
Original-Maintainer: LaMont Jones <lamont@debian.org>

Package: python-ruamel.yaml
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 817
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: ruamel.yaml
Version: 0.15.34-1
Depends: python (<< 2.8), python (>= 2.7~), python:any (<< 2.8), python:any (>= 2.7.5-5~), libc6 (>= 2.14)
Description: roundtrip YAML parser/emitter (Python 2 module)
 ruamel.yaml is a YAML parser supporting roundtrip preservation of
 comments, seq/map flow style and map key order. It is a derivative of
 Kirill Simonov's PyYAML 3.11 which supports YAML1.1.
 .
 This package contains the Python 2 module.
Original-Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Homepage: https://bitbucket.org/ruamel/yaml
Python-Egg-Name: ruamel.yaml

Package: libfreetype6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 918
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: freetype
Version: 2.8.1-2ubuntu2
Depends: libc6 (>= 2.14), libpng16-16 (>= 1.6.2-1), zlib1g (>= 1:1.1.4)
Description: FreeType 2 font engine, shared library files
 The FreeType project is a team of volunteers who develop free,
 portable and high-quality software solutions for digital typography.
 They specifically target embedded systems and focus on bringing small,
 efficient and ubiquitous products.
 .
 The FreeType 2 library is their new software font engine.  It has been
 designed to provide the following important features:
  * A universal and simple API to manage font files
  * Support for several font formats through loadable modules
  * High-quality anti-aliasing
  * High portability & performance
 .
 Supported font formats include:
  * TrueType files (.ttf) and collections (.ttc)
  * Type 1 font files both in ASCII (.pfa) or binary (.pfb) format
  * Type 1 Multiple Master fonts.  The FreeType 2 API also provides
    routines to manage design instances easily
  * Type 1 CID-keyed fonts
  * OpenType/CFF (.otf) fonts
  * CFF/Type 2 fonts
  * Adobe CEF fonts (.cef), used to embed fonts in SVG documents with
    the Adobe SVG viewer plugin.
  * Windows FNT/FON bitmap fonts
 .
 This package contains the files needed to run programs that use the
 FreeType 2 library.
 .
  Home Page: http://www.freetype.org/
  Authors: David Turner   <david.turner@freetype.org>
           Robert Wilhelm <robert.wilhelm@freetype.org>
           Werner Lemberg <werner.lemberg@freetype.org>
Homepage: http://www.freetype.org
Original-Maintainer: Steve Langasek <vorlon@debian.org>

Package: libtasn1-6
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 112
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Version: 4.13-2
Depends: libc6 (>= 2.14)
Description: Manage ASN.1 structures (runtime)
 Manage ASN1 (Abstract Syntax Notation One) structures.
 The main features of this library are:
   * on-line ASN1 structure management that doesn't require any C code
     file generation.
   * off-line ASN1 structure management with C code file generation
     containing an array.
   * DER (Distinguish Encoding Rules) encoding
   * no limits for INTEGER and ENUMERATED values
 .
 This package contains runtime libraries.
Original-Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>
Homepage: http://www.gnu.org/software/libtasn1/

Package: libmagic-mgc
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 4892
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: file
Version: 1:5.32-2ubuntu0.3
Replaces: libmagic1 (<< 1:5.28-4~)
Breaks: libmagic1 (<< 1:5.28-4~)
Description: File type determination library using "magic" numbers (compiled magic file)
 This package provides the compiled magic file "magic.mgc". It has
 been separated from libmagic1 in order to meet the multiarch
 requirements without breaking applications that expect this file
 at its absolute path.
Homepage: http://www.darwinsys.com/file/
Original-Maintainer: Christoph Biedl <debian.axhn@manchmal.in-ulm.de>

Package: python-minimal
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 145
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: allowed
Source: python-defaults
Version: 2.7.15~rc1-1
Replaces: python (<= 2.7.3-1~)
Depends: python2.7-minimal (>= 2.7.15~rc1-1~), dpkg (>= 1.13.20)
Recommends: python
Breaks: idle (<< 2.6), python (<= 2.7.3-1~), python-all (<< 2.6), python-all-dbg (<< 2.6), python-all-dev (<< 2.6), python-dbg (<< 2.6), python-dev (<< 2.6), python-examples (<< 2.6), python-support (<< 1.0.10ubuntu2), python2.5-minimal (<< 2.5.5-7), python2.6-minimal (<< 2.6.5~rc2-2), python3.1-minimal (<< 3.1.2~rc1-2)
Conflicts: python-central (<< 0.5.5)
Description: minimal subset of the Python language (default version)
 This package contains the interpreter and some essential modules.  It's used
 in the boot process for some basic tasks.
 See /usr/share/doc/python2.7-minimal/README.Debian for a list of the modules
 contained in this package.
Original-Maintainer: Matthias Klose <doko@debian.org>
Homepage: http://www.python.org/

Package: bzip2
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 177
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1.0.6-8.1ubuntu0.2
Replaces: libbz2 (<< 0.9.5d-3)
Depends: libbz2-1.0 (= 1.0.6-8.1ubuntu0.2), libc6 (>= 2.14)
Suggests: bzip2-doc
Description: high-quality block-sorting file compressor - utilities
 bzip2 is a freely available, patent free, high-quality data compressor.
 It typically compresses files to within 10% to 15% of the best available
 techniques, whilst being around twice as fast at compression and six
 times faster at decompression.
 .
 bzip2 compresses files using the Burrows-Wheeler block-sorting text
 compression algorithm, and Huffman coding.  Compression is generally
 considerably better than that achieved by more conventional
 LZ77/LZ78-based compressors, and approaches the performance of the PPM
 family of statistical compressors.
 .
 The archive file format of bzip2 (.bz2) is incompatible with that of its
 predecessor, bzip (.bz).
Homepage: http://www.bzip.org/
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>

Package: libmagic1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 198
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: file
Version: 1:5.32-2ubuntu0.3
Depends: libc6 (>= 2.15), zlib1g (>= 1:1.1.4), libmagic-mgc (= 1:5.32-2ubuntu0.3)
Suggests: file
Conffiles:
 /etc/magic 272913026300e7ae9b5e2d51f138e674
 /etc/magic.mime 272913026300e7ae9b5e2d51f138e674
Description: Recognize the type of data in a file using "magic" numbers - library
 This library can be used to classify files according to magic number
 tests. It implements the core functionality of the file command.
Homepage: http://www.darwinsys.com/file/
Original-Maintainer: Christoph Biedl <debian.axhn@manchmal.in-ulm.de>

Package: lsb-base
Status: install ok installed
Priority: required
Section: misc
Installed-Size: 58
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: lsb
Version: 9.20170808ubuntu1
Description: Linux Standard Base init script functionality
 The Linux Standard Base (http://www.linuxbase.org/) is a standard
 core system that third-party applications written for Linux can
 depend upon.
 .
 This package only includes the init-functions shell library, which
 may be used by other packages' initialization scripts for console
 logging and other purposes.
Homepage: https://wiki.linuxfoundation.org/lsb/start
Original-Maintainer: Debian LSB Team <debian-lsb@lists.debian.org>

Package: libhogweed4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 228
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: nettle
Version: 3.4-1
Depends: libc6 (>= 2.14), libgmp10 (>= 2:6.0.0), libnettle6 (= 3.4-1)
Description: low level cryptographic library (public-key cryptos)
 Nettle is a cryptographic library that is designed to fit easily in more or
 less any context: In crypto toolkits for object-oriented languages (C++,
 Python, Pike, ...), in applications like LSH or GNUPG, or even in kernel
 space.
 .
 It tries to solve a problem of providing a common set of cryptographic
 algorithms for higher-level applications by implementing a
 context-independent set of cryptographic algorithms. In that light, Nettle
 doesn't do any memory allocation or I/O, it simply provides the
 cryptographic algorithms for the application to use in any environment and
 in any way it needs.
 .
 This package contains the asymmetric cryptographic algorithms, which,
 require the GNU multiple precision arithmetic library (libgmp) for
 their large integer computations.
Original-Maintainer: Magnus Holmgren <holmgren@debian.org>
Homepage: http://www.lysator.liu.se/~nisse/nettle/

Package: procps
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 709
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 2:3.3.12-3ubuntu1.2
Provides: watch
Depends: libc6 (>= 2.27), libncurses5 (>= 6), libncursesw5 (>= 6), libprocps6, libtinfo5 (>= 6), lsb-base (>= 3.0-10), init-system-helpers (>= 1.29~)
Recommends: psmisc
Breaks: guymager (<= 0.5.9-1), open-vm-tools (<= 2011.12.20-562307-1)
Conflicts: pgrep (<< 3.3-5), w-bassman (<< 1.0-3)
Conffiles:
 /etc/init.d/procps 49fbfd237be2a2f09576f1f9374580be
 /etc/sysctl.conf 36547fde818f251846b0198564060927
 /etc/sysctl.d/10-console-messages.conf 154f6f5c5810d10bb303fb6a8e907c6a
 /etc/sysctl.d/10-ipv6-privacy.conf e9473d12b4a7069d6a3ca8b694511ddf
 /etc/sysctl.d/10-kernel-hardening.conf 5c1388f00011a287cdeba60208c674e1
 /etc/sysctl.d/10-link-restrictions.conf 8568316f2baa8db06554dab91f93a161
 /etc/sysctl.d/10-magic-sysrq.conf b3059f2835f17c97265433fdfdee358f
 /etc/sysctl.d/10-network-security.conf 4ac7258f5336e7eeaf448c05ab668d3c
 /etc/sysctl.d/10-ptrace.conf 47f40494b2fc698e15549e0a4a79e81c
 /etc/sysctl.d/10-zeropage.conf 8d7193abcc4dfedaf519dd03016a5e59
 /etc/sysctl.d/README c20074b9b11a5202758c69d7bcb6996f
Description: /proc file system utilities
 This package provides command line and full screen utilities for browsing
 procfs, a "pseudo" file system dynamically generated by the kernel to
 provide information about the status of entries in its process table
 (such as whether the process is running, stopped, or a "zombie").
 .
 It contains free, kill, pkill, pgrep, pmap, ps, pwdx, skill, slabtop,
 snice, sysctl, tload, top, uptime, vmstat, w, and watch.
Homepage: https://gitlab.com/procps-ng/procps
Original-Maintainer: Craig Small <csmall@debian.org>

Package: libgssapi-krb5-2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 423
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: krb5
Version: 1.16-2ubuntu0.1
Depends: libc6 (>= 2.27), libcom-err2 (>= 1.34), libk5crypto3 (>= 1.16), libkrb5-3 (= 1.16-2ubuntu0.1), libkrb5support0 (>= 1.15~beta1)
Suggests: krb5-doc, krb5-user
Breaks: moonshot-gss-eap (<= 1.0)
Description: MIT Kerberos runtime libraries - krb5 GSS-API Mechanism
 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service.  That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the runtime library for the MIT Kerberos
 implementation of GSS-API used by applications and Kerberos clients.
Homepage: http://web.mit.edu/kerberos/
Original-Maintainer: Sam Hartman <hartmans@debian.org>

Package: perl
Status: install ok installed
Priority: standard
Section: perl
Installed-Size: 568
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: allowed
Version: 5.26.1-6ubuntu0.3
Replaces: perl-modules (<< 5.22.0~)
Depends: perl-base (= 5.26.1-6ubuntu0.3), perl-modules-5.26 (>= 5.26.1-6ubuntu0.3), libperl5.26 (= 5.26.1-6ubuntu0.3)
Pre-Depends: dpkg (>= 1.17.17)
Recommends: netbase
Suggests: perl-doc, libterm-readline-gnu-perl | libterm-readline-perl-perl, make
Breaks: libperl-dev (<< 5.24.0~), perl-doc (<< 5.26.1-1)
Conflicts: libjson-pp-perl (<< 2.27200-2)
Conffiles:
 /etc/perl/Net/libnet.cfg fb2946cae573b8ed3d654a180d458733
Description: Larry Wall's Practical Extraction and Report Language
 Perl is a highly capable, feature-rich programming language with over
 20 years of development. Perl 5 runs on over 100 platforms from
 portables to mainframes. Perl is suitable for both rapid prototyping
 and large scale development projects.
 .
 Perl 5 supports many programming styles, including procedural,
 functional, and object-oriented. In addition to this, it is supported
 by an ever-growing collection of reusable modules which accelerate
 development. Some of these modules include Web frameworks, database
 integration, networking protocols, and encryption. Perl provides
 interfaces to C and C++ for custom extension development.
Homepage: http://dev.perl.org/perl5/
Original-Maintainer: Niko Tyni <ntyni@debian.org>

Package: libgpg-error0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 164
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libgpg-error
Version: 1.27-6
Depends: libc6 (>= 2.15)
Description: library for common error values and messages in GnuPG components
 Library that defines common error values for all GnuPG
 components.  Among these are GPG, GPGSM, GPGME, GPG-Agent, libgcrypt,
 pinentry, SmartCard Daemon and possibly more in the future.
Original-Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Homepage: https://www.gnupg.org/related_software/libgpg-error/

Package: libpython3.6-minimal
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 3810
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: python3.6
Version: 3.6.9-1~18.04
Depends: libc6 (>= 2.4), libssl1.1 (>= 1.1.1)
Recommends: libpython3.6-stdlib
Conflicts: binfmt-support (<< 1.1.2)
Conffiles:
 /etc/python3.6/sitecustomize.py d6b276695157bde06a56ba1b2bc53670
Description: Minimal subset of the Python language (version 3.6)
 This package contains some essential modules. It is normally not
 used on it's own, but as a dependency of python3.6-minimal.
Original-Maintainer: Matthias Klose <doko@debian.org>

Package: libpython-stdlib
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 37
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: python-defaults
Version: 2.7.15~rc1-1
Depends: libpython2.7-stdlib (>= 2.7.15~rc1-1~)
Description: interactive high-level object-oriented language (default python version)
 Python, the high-level, interactive object oriented language,
 includes an extensive class library with lots of goodies for
 network programming, system administration, sounds and graphics.
 .
 This package is a dependency package, which depends on Debian's default
 Python version (currently v2.7).
Original-Maintainer: Matthias Klose <doko@debian.org>
Homepage: http://www.python.org/

Package: python3-rsa
Status: install ok unpacked
Priority: optional
Section: python
Installed-Size: 154
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-rsa
Version: 3.4.2-1
Depends: python3, python3-pyasn1 (>= 0.1.3), python3:any (>= 3.3.2-2~)
Description: Pure-Python RSA implementation (Python 3)
 Python-RSA is a pure-Python RSA implementation. It supports encryption
 and decryption, signing and verifying signatures, and key generation
 according to PKCS#1 version 1.5. It can be used as a Python library as
 well as on the commandline. The code was mostly written by Sybren A. Stüvel.
 .
 This package contains the module for Python 3.
Original-Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Homepage: http://stuvel.eu/rsa

Package: binutils-common
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 416
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: binutils
Version: 2.30-21ubuntu1~18.04.2
Replaces: binutils (<< 2.29.1-3.1~)
Breaks: binutils (<< 2.29.1-3.1~)
Description: Common files for the GNU assembler, linker and binary utilities
 This package contains the localization files used by binutils packages for
 various target architectures and parts of the binutils documentation. It is
 not useful on its own.
Homepage: https://www.gnu.org/software/binutils/
Original-Maintainer: Matthias Klose <doko@debian.org>

Package: libjq1
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 309
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: jq
Version: 1.5+dfsg-2
Depends: libc6 (>= 2.14), libonig4 (>= 5.9.5)
Description: lightweight and flexible command-line JSON processor - shared library
 jq is like sed for JSON data – you can use it to slice
 and filter and map and transform structured data with
 the same ease that sed, awk, grep and friends let you
 play with text.
 .
 It is written in portable C, and it has minimal runtime
 dependencies.
 .
 jq can mangle the data format that you have into the
 one that you want with very little effort, and the
 program to do so is often shorter and simpler than
 you’d expect.
 .
 This package contains the shared library.
Original-Maintainer: ChangZhuo Chen (陳昌倬) <czchen@debian.org>
Homepage: https://github.com/stedolan/jq

Package: python-cffi-backend
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 186
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: python-cffi
Version: 1.11.5-1
Replaces: python-cffi (<< 1)
Provides: python-cffi-backend-api-9729, python-cffi-backend-api-max (= 10495), python-cffi-backend-api-min (= 9729)
Depends: python (<< 2.8), python (>= 2.7~), python:any (<< 2.8), python:any (>= 2.7~), libc6 (>= 2.14), libffi6 (>= 3.0.4)
Breaks: python-cffi (<< 1)
Description: Foreign Function Interface for Python calling C code - backend
 Convenient and reliable way of calling C code from Python.
 .
 The aim of this project is to provide a convenient and reliable way of calling
 C code from Python. It keeps Python logic in Python, and minimises the C
 required. It is able to work at either the C API or ABI level, unlike most
 other approaches, that only support the ABI level.
 .
 This package contains the runtime support for pre-built cffi modules.
Original-Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Homepage: http://cffi.readthedocs.org/

Package: base-files
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 387
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 10.1ubuntu2.8
Replaces: base, dpkg (<= 1.15.0), miscutils
Provides: base
Depends: libc6 (>= 2.3.4)
Pre-Depends: awk
Breaks: initscripts (<< 2.88dsf-13.3), sendfile (<< 2.1b.20080616-5.2~)
Conffiles:
 /etc/debian_version 71f3b31c52b52a91784e496ddf94b019
 /etc/default/motd-news c08a329a603b640095da5ffe4e73491c
 /etc/dpkg/origins/debian 731423fa8ba067262f8ef37882d1e742
 /etc/dpkg/origins/ubuntu ea35901c45553c3451f60476be94d2d8
 /etc/host.conf 89408008f2585c957c031716600d5a80
 /etc/issue 9c771e1fa41a5a833f5824b41bd3eb1f
 /etc/issue.net 39eb618332de8dab671b125032ddb788
 /etc/legal 0110925f6e068836ef2e09356e3651d9
 /etc/lsb-release 741234b05e5349212282f0b1477be224
 /etc/profile.d/01-locale-fix.sh 870346d97b16faac4a371b04ffe4cc2f
 /etc/update-motd.d/00-header 4a1e6eed7a59f200b4267085721750a3
 /etc/update-motd.d/10-help-text d95d18b11ac12cf6582d08a1643034f3
 /etc/update-motd.d/50-motd-news 0031f05946932b1e0a4f4ec86dda97e0
Description: Debian base system miscellaneous files
 This package contains the basic filesystem hierarchy of a Debian system, and
 several important miscellaneous files, such as /etc/debian_version,
 /etc/host.conf, /etc/issue, /etc/motd, /etc/profile, and others,
 and the text of several common licenses in use on Debian systems.
Original-Maintainer: Santiago Vila <sanvila@debian.org>

Package: libyaml-0-2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 137
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libyaml
Version: 0.1.7-2ubuntu3
Depends: libc6 (>= 2.14)
Description: Fast YAML 1.1 parser and emitter library
 LibYAML is a C library for parsing and emitting data in YAML 1.1, a
 human-readable data serialization format.
Original-Maintainer: Anders Kaseorg <andersk@mit.edu>
Homepage: http://pyyaml.org/wiki/LibYAML

Package: libgmp10
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 558
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gmp
Version: 2:6.1.2+dfsg-2
Depends: libc6 (>= 2.14)
Description: Multiprecision arithmetic library
 GNU MP is a programmer's library for arbitrary precision
 arithmetic (ie, a bignum package).  It can operate on signed
 integer, rational, and floating point numeric types.
 .
 It has a rich set of functions, and the functions have a regular
 interface.
Original-Maintainer: Debian Science Team <debian-science-maintainers@lists.alioth.debian.org>
Homepage: http://gmplib.org/

Package: sensible-utils
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 62
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 0.0.12
Replaces: debianutils (<= 2.32.3), manpages-pl (<= 20060617-3~)
Description: Utilities for sensible alternative selection
 This package provides a number of small utilities which are used
 by programs to sensibly select and spawn an appropriate browser,
 editor, or pager.
 .
 The specific utilities included are: sensible-browser sensible-editor
 sensible-pager
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>

Package: python3-pyasn1
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 358
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: pyasn1
Version: 0.4.2-3
Depends: python3:any (>= 3.3.2-2~)
Breaks: python3-pysnmp4 (<< 4.3.4)
Description: ASN.1 library for Python (Python 3 module)
 This  is  an implementation  of  ASN.1  types  and codecs  in  Python
 programming language. It has been first written to support particular
 protocol (SNMP) but then generalized  to be suitable for a wide range
 of protocols based on ASN.1 specification.
 .
 This package contains the Python 3 module.
Original-Maintainer: Jan Lübbe <jluebbe@debian.org>
Homepage: http://pyasn1.sourceforge.net/

Package: numactl
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 120
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 2.0.11-2.1ubuntu0.1
Depends: libc6 (>= 2.14), libnuma1 (>= 2.0.11)
Description: NUMA scheduling and memory placement tool
 numactl runs processes with a specific NUMA (Non-Uniform Memory
 Architecture) scheduling or memory placement policy.  In addition it
 can set persistent policy for shared memory segments or files.
Original-Maintainer: Ian Wienand <ianw@debian.org>
Homepage: http://oss.sgi.com/projects/libnuma/

Package: python3-docutils
Status: install ok unpacked
Priority: optional
Section: python
Installed-Size: 1745
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: python-docutils
Version: 0.14+dfsg-3
Provides: docutils
Depends: docutils-common (= 0.14+dfsg-3), python3-roman, python3:any (>= 3.3.2-2~)
Recommends: libpaper-utils, python3-pil, python3-pygments
Suggests: docutils-doc, fonts-linuxlibertine | ttf-linux-libertine, texlive-lang-french, texlive-latex-base, texlive-latex-recommended
Description: text processing system for reStructuredText (implemented in Python 3)
 reStructuredText is an easy-to-read, what-you-see-is-what-you-get plaintext
 markup syntax and parser system. It is useful for in-line program documentation
 (such as Python docstrings), for quickly creating simple web pages, and for
 standalone documents.
 .
 The purpose of the Docutils project is to create a set of tools for
 processing reStructuredText documentation into useful formats, such as HTML,
 LaTeX, ODT or Unix manpages.
 .
 This package includes Python 3 modules and command line utilities.
Original-Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Homepage: http://docutils.sourceforge.net/

Package: python-six
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 54
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: six
Version: 1.11.0-2
Depends: python:any (<< 2.8), python:any (>= 2.7.5-5~)
Description: Python 2 and 3 compatibility library (Python 2 interface)
 Six is a Python 2 and 3 compatibility library. It provides utility
 functions for smoothing over the differences between the Python versions
 with the goal of writing Python code that is compatible on both Python
 versions.
 .
 This package provides Six on the Python 2 module path. It is complemented
 by python3-six and pypy-six.
Original-Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Homepage: https://pypi.python.org/pypi/six

Package: passwd
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 2549
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: shadow
Version: 1:4.5-1ubuntu2
Replaces: manpages-tr (<< 1.0.5), manpages-zh (<< 1.5.1-1)
Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.14), libpam0g (>= 0.99.7.1), libselinux1 (>= 1.32), libsemanage1 (>= 2.0.3), libpam-modules
Conffiles:
 /etc/cron.daily/passwd db990990933b6f56322725223f13c2bc
 /etc/default/useradd cc9f9a7713ab62a32cd38363d958f396
 /etc/pam.d/chfn 4d466e00a348ba426130664d795e8afa
 /etc/pam.d/chpasswd 9900720564cb4ee98b7da29e2d183cb2
 /etc/pam.d/chsh a6e9b589e90009334ffd030d819290a6
 /etc/pam.d/newusers 1454e29bfa9f2a10836563e76936cea5
 /etc/pam.d/passwd eaf2ad85b5ccd06cceb19a3e75f40c63
Description: change and administer password and group data
 This package includes passwd, chsh, chfn, and many other programs to
 maintain password and group data.
 .
 Shadow passwords are supported.  See /usr/share/doc/passwd/README.Debian
Homepage: https://github.com/shadow-maint/shadow
Original-Maintainer: Shadow package maintainers <pkg-shadow-devel@lists.alioth.debian.org>

Package: init-system-helpers
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 129
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 1.51
Replaces: sysv-rc (<< 2.88dsf-59.3~), sysvinit-utils (<< 2.88dsf-59.3)
Depends: perl-base (>= 5.20.1-3)
Breaks: systemd (<< 44-12), sysvinit-utils (<< 2.88dsf-59.3~)
Conflicts: file-rc (<< 0.8.17~), openrc (<= 0.18.3-1)
Description: helper tools for all init systems
 This package contains helper tools that are necessary for switching between
 the various init systems that Debian contains (e. g. sysvinit or
 systemd). An example is deb-systemd-helper, a script that enables systemd unit
 files without depending on a running systemd.
 .
 It also includes the "service", "invoke-rc.d", and "update-rc.d" scripts which
 provide an abstraction for enabling, disabling, starting, and stopping
 services for all supported Debian init systems as specified by the policy.
 .
 While this package is maintained by pkg-systemd-maintainers, it is NOT
 specific to systemd at all. Maintainers of other init systems are welcome to
 include their helpers in this package.
Original-Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>

Package: libunwind8
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 172
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libunwind
Version: 1.2.1-8
Replaces: libgcc1 (<< 1:4.0.0-2)
Depends: libc6 (>= 2.4), liblzma5 (>= 5.1.1alpha+20110809)
Conflicts: libunwind1-dev
Description: library to determine the call-chain of a program - runtime
 The primary goal of this project is to define a portable and efficient C
 programming interface (API) to determine the call-chain of a program.
 The API additionally provides the means to manipulate the preserved
 (callee-saved) state of each call-frame and to resume execution at any
 point in the call-chain (non-local goto). The API supports both local
 (same-process) and remote (across-process) operation. As such, the API
 is useful in a number of applications.
 .
 This package includes the shared libraries
Original-Maintainer: Adrian Bunk <bunk@debian.org>
Homepage: http://www.nongnu.org/libunwind

Package: ncurses-base
Essential: yes
Status: install ok installed
Priority: required
Section: misc
Installed-Size: 364
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: ncurses
Version: 6.1-1ubuntu1.18.04
Provides: ncurses-runtime
Breaks: ncurses-term (<< 5.7+20100313-3)
Conffiles:
 /etc/terminfo/README 45b6df19fb5e21f55717482fa7a30171
Description: basic terminal type definitions
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains terminfo data files to support the most common types of
 terminal, including ansi, dumb, linux, rxvt, screen, sun, vt100, vt102, vt220,
 vt52, and xterm.
Homepage: https://invisible-island.net/ncurses/
Original-Maintainer: Craig Small <csmall@debian.org>

Package: krb5-locales
Status: install ok installed
Priority: optional
Section: localization
Installed-Size: 136
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: krb5
Version: 1.16-2ubuntu0.1
Description: internationalization support for MIT Kerberos
 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service.  That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains internationalized messages for MIT Kerberos.
Homepage: http://web.mit.edu/kerberos/
Original-Maintainer: Sam Hartman <hartmans@debian.org>

Package: libc-bin
Essential: yes
Status: install ok triggers-pending
Priority: required
Section: libs
Installed-Size: 3631
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: glibc
Version: 2.27-3ubuntu1
Depends: libc6 (>> 2.27), libc6 (<< 2.28)
Suggests: manpages
Conffiles:
 /etc/bindresvport.blacklist 4c09213317e4e3dd3c71d74404e503c5
 /etc/default/nss d6d5d6f621fb3ead2548076ce81e309c
 /etc/gai.conf 28fa76ff5a9e0566eaa1e11f1ce51f09
 /etc/ld.so.conf 4317c6de8564b68d628c21efa96b37e4
 /etc/ld.so.conf.d/libc.conf d4d833fd095fb7b90e1bb4a547f16de6
Description: GNU C Library: Binaries
 This package contains utility programs related to the GNU C Library.
 .
  * catchsegv: catch segmentation faults in programs
  * getconf: query system configuration variables
  * getent: get entries from administrative databases
  * iconv, iconvconfig: convert between character encodings
  * ldd, ldconfig: print/configure shared library dependencies
  * locale, localedef: show/generate locale definitions
  * tzselect, zdump, zic: select/dump/compile time zones
Triggers-Pending: ldconfig
Homepage: https://www.gnu.org/software/libc/libc.html
Original-Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>

Package: libsemanage1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 292
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libsemanage
Version: 2.7-2build2
Depends: libsemanage-common (= 2.7-2build2), libaudit1 (>= 1:2.2.1), libbz2-1.0, libc6 (>= 2.14), libselinux1 (>= 2.7), libsepol1 (>= 2.7)
Breaks: policycoreutils (<< 2.4), selinux-policy-default (<< 2:2.20140421-10~), selinux-policy-mls (<< 2:2.20140421-10~)
Description: SELinux policy management library
 This package provides the shared libraries for SELinux policy management.
 It uses libsepol for binary policy manipulation and libselinux for
 interacting with the SELinux system.  It also exec's helper programs
 for loading policy and for checking whether the file_contexts
 configuration is valid (load_policy and setfiles from
 policycoreutils) presently, although this may change at least for the
 bootstrapping case
 .
 Security-enhanced Linux is a patch of the Linux kernel and a
 number of utilities with enhanced security functionality designed to
 add mandatory access controls to Linux.  The Security-enhanced Linux
 kernel contains new architectural components originally developed to
 improve the security of the Flask operating system. These
 architectural components provide general support for the enforcement
 of many kinds of mandatory access control policies, including those
 based on the concepts of Type Enforcement, Role-based Access
 Control, and Multi-level Security.
Homepage: http://userspace.selinuxproject.org/
Original-Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>

Package: linux-tools-common
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 635
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: linux
Version: 4.15.0-96.97
Depends: lsb-release
Description: Linux kernel version specific tools for version 4.15.0
 This package provides the architecture independent parts for kernel
 version locked tools (such as perf and x86_energy_perf_policy) for
 version PGKVER.

Package: python-rdflib-jsonld
Status: install ok unpacked
Priority: optional
Section: python
Installed-Size: 60
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 0.4.0-3
Depends: python-rdflib (>= 4.2.1), python:any (<< 2.8), python:any (>= 2.7.5-5~)
Description: rdflib extension adding JSON-LD parser and serializer in Python 2
 This parser/serialiser will
 .
  - read in an JSON-LD formatted document and create an RDF graph
  - serialize an RDF graph to JSON-LD formatted output
 .
 This is the Python 2 version.
Original-Maintainer: Debian Med Packaging Team <debian-med-packaging@lists.alioth.debian.org>
Homepage: https://github.com/RDFLib/rdflib-jsonld

Package: publicsuffix
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 283
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 20180223.1310-1
Provides: publicsuffix-dafsa
Description: accurate, machine-readable list of domain name suffixes
 A machine-readable list of domain name suffixes that accept public
 registration.  Each suffix represents the part of a domain name which
 is not under the control of the individual registrant, which makes
 the list useful for grouping cookies, deciding same-origin policies,
 collating spam, and other activities.
Original-Maintainer: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
Homepage: https://publicsuffix.org

Package: libseccomp2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 302
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libseccomp
Version: 2.4.1-0ubuntu0.18.04.2
Depends: libc6 (>= 2.4)
Description: high level interface to Linux seccomp filter
 This library provides a high level interface to constructing, analyzing
 and installing seccomp filters via a BPF passed to the Linux Kernel's
 prctl() syscall.
Homepage: https://github.com/seccomp/libseccomp
Original-Maintainer: Kees Cook <kees@debian.org>

Package: libperl5.26
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 21395
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: perl
Version: 5.26.1-6ubuntu0.3
Replaces: libarchive-tar-perl (<= 1.38-2), libcompress-raw-bzip2-perl (<< 2.074), libcompress-raw-zlib-perl (<< 2.074), libcompress-zlib-perl (<< 2.074), libdigest-md5-perl (<< 2.55), libdigest-sha-perl (<< 5.96), libencode-perl (<< 2.94), libio-compress-base-perl (<< 2.074), libio-compress-bzip2-perl (<< 2.074), libio-compress-perl (<< 2.074), libio-compress-zlib-perl (<< 2.074), libmime-base64-perl (<< 3.15), libmodule-corelist-perl (<< 2.14-2), libstorable-perl (<< 2.62), libsys-syslog-perl (<< 0.35), libthreads-perl (<< 2.15), libthreads-shared-perl (<< 1.56), libtime-hires-perl (<< 1.9741), libtime-piece-perl (<< 1.31), perl (<< 5.22.0~), perl-base (<< 5.22.0~)
Provides: libcompress-raw-bzip2-perl, libcompress-raw-zlib-perl, libcompress-zlib-perl, libdigest-md5-perl, libdigest-sha-perl, libencode-perl, libio-compress-base-perl, libio-compress-bzip2-perl, libio-compress-perl, libio-compress-zlib-perl, libmime-base64-perl, libstorable-perl, libsys-syslog-perl, libthreads-perl, libthreads-shared-perl, libtime-hires-perl, libtime-piece-perl, perl-cross-config
Depends: libbz2-1.0, libc6 (>= 2.23), libdb5.3, libgdbm-compat4, libgdbm5 (>= 1.12), zlib1g (>= 1:1.2.2.3), perl-modules-5.26 (>= 5.26.1-6ubuntu0.3)
Breaks: dh-make-perl (<< 0.73-1), ftpmirror (<< 1.96+dfsg-13), libcompress-raw-bzip2-perl (<< 2.074), libcompress-raw-zlib-perl (<< 2.074), libcompress-zlib-perl (<< 2.074), libdigest-md5-perl (<< 2.55), libdigest-sha-perl (<< 5.96), libencode-perl (<< 2.94), libhtml-template-compiled-perl (<< 0.95-1), libio-compress-base-perl (<< 2.074), libio-compress-bzip2-perl (<< 2.074), libio-compress-perl (<< 2.074), libio-compress-zlib-perl (<< 2.074), libload-perl (<< 0.20-1), libmime-base64-perl (<< 3.15), libnet-jifty-perl (<< 0.14-1), libperl-apireference-perl (<< 0.09-1), libregexp-optimizer-perl (<< 0.15-3), libsoap-lite-perl (<< 0.712-4), libstorable-perl (<< 2.62), libsys-syslog-perl (<< 0.35), libthreads-perl (<< 2.15), libthreads-shared-perl (<< 1.56), libtime-hires-perl (<< 1.9741), libtime-piece-perl (<< 1.31), libxml-parser-lite-tree-perl (<< 0.14-1), libyaml-perl (<< 0.73-1), mrtg (<< 2.16.3-3.1)
Description: shared Perl library
 This package contains the shared Perl library, used by applications
 which embed a Perl interpreter.
 .
 It also contains the architecture-dependent parts of the standard
 library (and depends on perl-modules-5.26 which contains the
 architecture-independent parts).
Homepage: http://dev.perl.org/perl5/
Original-Maintainer: Niko Tyni <ntyni@debian.org>

Package: linux-tools-4.15.0-96
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 21122
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux
Version: 4.15.0-96.97
Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.17), libdw1 (>= 0.157), libelf1 (>= 0.144), liblzma5 (>= 5.1.1alpha+20120614), libnuma1 (>= 2.0.11), libpci3 (>= 1:3.5.2-1), libslang2 (>= 2.2.4), libudev1 (>= 183), libunwind8, zlib1g (>= 1:1.1.4), linux-tools-common
Description: Linux kernel version specific tools for version 4.15.0-96
 This package provides the architecture dependant parts for kernel
 version locked tools (such as perf and x86_energy_perf_policy) for
 version 4.15.0-96 on
 64 bit x86.
 You probably want to install linux-tools-4.15.0-96-<flavour>.

Package: libldap-2.4-2
Status: install ok unpacked
Priority: standard
Section: libs
Installed-Size: 498
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: openldap
Version: 2.4.45+dfsg-1ubuntu1.4
Replaces: libldap-2.3-0, libldap2
Depends: libc6 (>= 2.14), libgnutls30 (>= 3.5.6), libgssapi3-heimdal (>= 1.4.0+git20110226), libsasl2-2, libldap-common (>= 2.4.45+dfsg-1ubuntu1.4)
Conflicts: ldap-utils (<= 2.1.23-1)
Description: OpenLDAP libraries
 These are the run-time libraries for the OpenLDAP (Lightweight Directory
 Access Protocol) servers and clients.
Homepage: http://www.openldap.org/
Original-Maintainer: Debian OpenLDAP Maintainers <pkg-openldap-devel@lists.alioth.debian.org>

Package: python3-chardet
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 410
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: chardet
Version: 3.0.4-1
Depends: python3:any (>= 3.3.2-2~), python3-pkg-resources
Description: universal character encoding detector for Python3
 Chardet takes a sequence of bytes in an unknown character encoding, and
 attempts to determine the encoding.
 .
 Supported encodings:
  * ASCII, UTF-8, UTF-16 (2 variants), UTF-32 (4 variants)
  * Big5, GB2312, EUC-TW, HZ-GB-2312, ISO-2022-CN (Traditional and Simplified
    Chinese)
  * EUC-JP, SHIFT_JIS, ISO-2022-JP (Japanese)
  * EUC-KR, ISO-2022-KR (Korean)
  * KOI8-R, MacCyrillic, IBM855, IBM866, ISO-8859-5, windows-1251 (Cyrillic)
  * ISO-8859-2, windows-1250 (Hungarian)
  * ISO-8859-5, windows-1251 (Bulgarian)
  * windows-1252 (English)
  * ISO-8859-7, windows-1253 (Greek)
  * ISO-8859-8, windows-1255 (Visual and Logical Hebrew)
  * TIS-620 (Thai)
 .
 This library is a port of the auto-detection code in Mozilla.
 .
 This package contains the Python 3 version of the library.
Original-Maintainer: Piotr Ożarowski <piotr@debian.org>
Homepage: https://github.com/chardet/chardet

Package: python-isodate
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 155
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: isodate
Version: 0.6.0-1
Depends: python-six, python:any (<< 2.8), python:any (>= 2.7.5-5~)
Description: ISO 8601 date/time/duration parser and formatter (Python module)
 This Python module implements ISO 8601 date, time and duration parsing.
Original-Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Homepage: https://pypi.python.org/pypi/isodate

Package: dstat
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 433
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 0.7.3-1
Depends: python:any (>= 2.6.6-7~)
Conflicts: sleuthkit (<< 1.73-2)
Description: versatile resource statistics tool
 Dstat is a versatile replacement for vmstat, iostat and ifstat. Dstat
 overcomes some of the limitations of these programs and adds some
 extra features.
 .
 Dstat allows you to view all of your network resources instantly, you
 can for example, compare disk usage in combination with interrupts
 from your IDE controller, or compare the network bandwidth numbers
 directly with the disk throughput (in the same interval).
 .
 Dstat also cleverly gives you the most detailed information in columns
 and clearly indicates in what magnitude and unit the output is displayed.
 .
 Dstat is also unique in letting you aggregate block device throughput for
 a certain diskset or network bandwidth for a group of interfaces, i.e. you
 can see the throughput for all the block devices that make up a single
 filesystem or storage system.
 .
 Dstat's output, in its current form, is not suited for post-processing by
 other tools, it's mostly meant for humans to interpret real-time data
 as easy as possible.
Original-Maintainer: Andrew Pollock <apollock@debian.org>
Homepage: http://dag.wiee.rs/home-made/dstat/

Package: libssl1.1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 3933
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: openssl
Version: 1.1.1-1ubuntu2.1~18.04.5
Depends: libc6 (>= 2.25), debconf (>= 0.5) | debconf-2.0
Breaks: isync (<= 1.3.0-1build1), python-boto (<= 2.44.0-1ubuntu2), python-httplib2 (<= 0.9.2+dfsg-1), python-imaplib2 (<= 2.57-1), python3-boto (<= 2.44.0-1ubuntu2), python3-imaplib2 (<= 2.57-1)
Description: Secure Sockets Layer toolkit - shared libraries
 This package is part of the OpenSSL project's implementation of the SSL
 and TLS cryptographic protocols for secure communication over the
 Internet.
 .
 It provides the libssl and libcrypto shared libraries.
Homepage: https://www.openssl.org/
Original-Maintainer: Debian OpenSSL Team <pkg-openssl-devel@lists.alioth.debian.org>

Package: sysvinit-utils
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 60
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: sysvinit
Version: 2.88dsf-59.10ubuntu1
Replaces: initscripts (<< 2.88dsf-59.5)
Depends: libc6 (>= 2.14), init-system-helpers (>= 1.25~), util-linux (>> 2.28-2~)
Breaks: systemd (<< 215)
Description: System-V-like utilities
 This package contains the important System-V-like utilities.
 .
 Specifically, this package includes:
 killall5, pidof
Homepage: http://savannah.nongnu.org/projects/sysvinit
Original-Maintainer: Debian sysvinit maintainers <pkg-sysvinit-devel@lists.alioth.debian.org>

Package: xz-utils
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 428
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 5.2.2-1.3
Replaces: lzip (<< 1.8~rc2), xz-lzma
Provides: lzma
Depends: libc6 (>= 2.17), liblzma5 (>= 5.2.2)
Breaks: lzip (<< 1.8~rc2)
Conflicts: lzma (<< 9.22-1), xz-lzma
Description: XZ-format compression utilities
 XZ is the successor to the Lempel-Ziv/Markov-chain Algorithm
 compression format, which provides memory-hungry but powerful
 compression (often better than bzip2) and fast, easy decompression.
 .
 This package provides the command line tools for working with XZ
 compression, including xz, unxz, xzcat, xzgrep, and so on. They can
 also handle the older LZMA format, and if invoked via appropriate
 symlinks will emulate the behavior of the commands in the lzma
 package.
 .
 The XZ format is similar to the older LZMA format but includes some
 improvements for general use:
 .
  * 'file' magic for detecting XZ files;
  * crc64 data integrity check;
  * limited random-access reading support;
  * improved support for multithreading (not used in xz-utils);
  * support for flushing the encoder.
Original-Maintainer: Jonathan Nieder <jrnieder@gmail.com>
Homepage: http://tukaani.org/xz/

Package: libwebpmux3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 56
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libwebp
Version: 0.6.1-2
Depends: libc6 (>= 2.14), libwebp6 (>= 0.5.1)
Description: Lossy compression of digital photographic images.
 Image Compression format, based on the VP8 codec.
 WebP uses the modern VP8 compression format to deliver efficient
 compression of images for the web. More than 30% extra gain over
 optimized JPEG, for same quality, is not unusual.
Original-Maintainer: Jeff Breidenbach <jab@debian.org>
Homepage: https://developers.google.com/speed/webp/

Package: libheimbase1-heimdal
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 104
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: heimdal
Version: 7.5.0+dfsg-1
Depends: libc6 (>= 2.14)
Description: Heimdal Kerberos - Base library
 Heimdal is a free implementation of Kerberos 5 that aims to be
 compatible with MIT Kerberos.
 .
 This package contains the base library.
Original-Maintainer: Brian May <bam@debian.org>
Homepage: http://www.h5l.org/

Package: python-shellescape
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 25
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 3.4.1-2
Depends: python:any (<< 2.8), python:any (>= 2.7.5-5~)
Description: escapes characters to safely assemble command lines
 This python2 library helps to escape a string to safely use it as a token in
 a shell command.
 .
 The shellescape Python module defines the shellescape.quote() function
 that returns a shell-escaped version of a Python string. This is a
 backport of the shlex.quote() function from Python 3.4.3 that makes
 it accessible to users of Python 3 versions < 3.3 and all Python 2.x
 versions.
Original-Maintainer: Steffen Moeller <moeller@debian.org>
Homepage: https://github.com/chrissimpkins/shellescape

Package: libsemanage-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 29
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: libsemanage
Version: 2.7-2build2
Replaces: libsemanage1 (<= 2.0.41-1), libsemanage1-dev (<< 2.1.6-3~)
Breaks: libsemanage1 (<= 2.0.41-1), libsemanage1-dev (<< 2.1.6-3~)
Conffiles:
 /etc/selinux/semanage.conf f6f9b97af233c90ca127f406fb6f0932
Description: Common files for SELinux policy management libraries
 This package provides the common files used by the shared libraries
 for SELinux policy management.
 .
 Security-enhanced Linux is a patch of the Linux kernel and a
 number of utilities with enhanced security functionality designed to
 add mandatory access controls to Linux.  The Security-enhanced Linux
 kernel contains new architectural components originally developed to
 improve the security of the Flask operating system. These
 architectural components provide general support for the enforcement
 of many kinds of mandatory access control policies, including those
 based on the concepts of Type Enforcement, Role-based Access
 Control, and Multi-level Security.
Homepage: http://userspace.selinuxproject.org/
Original-Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>

Package: cwltool
Status: install ok unpacked
Priority: optional
Section: science
Installed-Size: 1251
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.0.20180302231433-1
Provides: cwl-runner
Depends: python-pkg-resources, python-rdflib, python-requests, python-ruamel.yaml, python-schema-salad, python-shellescape, python-six (>= 1.8.0), python-typing, python:any (<< 2.8), python:any (>= 2.7.5-5~)
Recommends: nodejs
Description: Common Workflow Language reference implementation
 This is the reference implementation of the Common Workflow Language
 standards.
 .
 The CWL open standards are for describing analysis workflows and tools in a
 way that makes them portable and scalable across a variety of software and
 hardware environments, from workstations to cluster, cloud, and high
 performance computing (HPC) environments. CWL is designed to meet the needs of
 data-intensive science, such as Bioinformatics, Medical Imaging, Astronomy,
 Physics, and Chemistry.
 .
 The CWL reference implementation (cwltool) is intended to be feature complete
 and to provide comprehensive validation of CWL files as well as provide other
 tools related to working with CWL descriptions.
Original-Maintainer: Debian Med Packaging Team <debian-med-packaging@lists.alioth.debian.org>
Homepage: http://www.commonwl.org

Package: libp11-kit0
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 1246
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: p11-kit
Version: 0.23.9-2
Depends: libc6 (>= 2.26), libffi6 (>= 3.0.4)
Breaks: opencryptoki (<= 3.6.1+dfsg-1)
Description: library for loading and coordinating access to PKCS#11 modules - runtime
 The p11-kit library provides a way to load and enumerate Public-Key
 Cryptography Standard #11 modules, along with a standard configuration
 setup for installing PKCS#11 modules so that they're discoverable. It
 also solves problems with coordinating the use of PKCS#11 by different
 components or libraries living in the same process.
 .
 This package contains the shared library required for applications loading
 and accessing PKCS#11 modules.
Original-Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>
Homepage: http://p11-glue.freedesktop.org/p11-kit.html

Package: python3-minimal
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 121
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: allowed
Source: python3-defaults
Version: 3.6.7-1~18.04
Depends: dpkg (>= 1.13.20)
Pre-Depends: python3.6-minimal (>= 3.6.7-1~)
Description: minimal subset of the Python language (default python3 version)
 This package contains the interpreter and some essential modules.  It's used
 in the boot process for some basic tasks.
 See /usr/share/doc/python3.6-minimal/README.Debian for a list of the modules
 contained in this package.
Homepage: https://www.python.org/
Original-Maintainer: Matthias Klose <doko@debian.org>

Package: python-enum34
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 218
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: enum34
Version: 1.1.6-2
Depends: python:any (<< 2.8), python:any (>= 2.7.5-5~)
Suggests: python-enum34-doc
Breaks: python-enum
Description: backport of Python 3.4's enum package
 PEP 435 adds an enumeration to Python 3.4.  This module provides a
 backport of that data type for older Python versions.  It defines two
 enumeration classes that can be used to define unit sets of names and
 values: Enum and IntEnum.
 .
 This is the Python 2 compatible package.
Original-Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Homepage: https://pypi.python.org/pypi/enum34

Package: libdebconfclient0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 68
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: cdebconf
Version: 0.213ubuntu1
Depends: libc6 (>= 2.4)
Description: Debian Configuration Management System (C-implementation library)
 Debconf is a configuration management system for Debian packages. It is
 used by some packages to prompt you for information before they are
 installed. cdebconf is a reimplementation of the original debconf in C.
 .
 This library allows C programs to interface with cdebconf.
Original-Maintainer: Debian Install System Team <debian-boot@lists.debian.org>

Package: libselinux1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 193
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libselinux
Version: 2.7-2build2
Depends: libc6 (>= 2.14), libpcre3
Description: SELinux runtime shared libraries
 This package provides the shared libraries for Security-enhanced
 Linux that provides interfaces (e.g. library functions for the
 SELinux kernel APIs like getcon(), other support functions like
 getseuserbyname()) to SELinux-aware applications. Security-enhanced
 Linux is a patch of the Linux kernel and a number of utilities with
 enhanced security functionality designed to add mandatory access
 controls to Linux.  The Security-enhanced Linux kernel contains new
 architectural components originally developed to improve the security
 of the Flask operating system. These architectural components provide
 general support for the enforcement of many kinds of mandatory access
 control policies, including those based on the concepts of Type
 Enforcement, Role-based Access Control, and Multi-level Security.
 .
 libselinux1 provides an API for SELinux applications to get and set
 process and file security contexts and to obtain security policy
 decisions.  Required for any applications that use the SELinux
 API. libselinux may use the shared libsepol to manipulate the binary
 policy if necessary (e.g. to downgrade the policy format to an older
 version supported by the kernel) when loading policy.
Homepage: http://userspace.selinuxproject.org/
Original-Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>

Package: libpython2.7
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 3485
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: python2.7
Version: 2.7.17-1~18.04
Replaces: python2.7 (<< 2.6)
Depends: libpython2.7-stdlib (= 2.7.17-1~18.04), libc6 (>= 2.15), zlib1g (>= 1:1.2.0)
Description: Shared Python runtime library (version 2.7)
 Python is a high-level, interactive, object-oriented language. Its 2.7 version
 includes an extensive class library with lots of goodies for
 network programming, system administration, sounds and graphics.
 .
 This package contains the shared runtime library, normally not needed
 for programs using the statically linked interpreter.
Original-Maintainer: Matthias Klose <doko@debian.org>

Package: dpkg
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 6774
Origin: debian
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Bugs: debbugs://bugs.debian.org
Architecture: amd64
Multi-Arch: foreign
Version: 1.19.0.5ubuntu2.3
Depends: tar (>= 1.28-1)
Pre-Depends: libbz2-1.0, libc6 (>= 2.14), liblzma5 (>= 5.2.2), libselinux1 (>= 2.3), libzstd1 (>= 1.3.2), zlib1g (>= 1:1.1.4)
Suggests: apt, debsig-verify
Breaks: acidbase (<= 1.4.5-4), amule (<< 2.3.1+git1a369e47-3), beep (<< 1.3-4), im (<< 1:151-4), libdpkg-perl (<< 1.18.11), netselect (<< 0.3.ds1-27), pconsole (<< 1.0-12), phpgacl (<< 3.3.7-7.3), pure-ftpd (<< 1.0.43-1), systemtap (<< 2.8-1), terminatorx (<< 4.0.1-1), xvt (<= 2.1-20.1)
Conffiles:
 /etc/alternatives/README 7be88b21f7e386c8d5a8790c2461c92b
 /etc/cron.daily/dpkg 4a75e177a3662e2efd8d477ae8e8533b
 /etc/dpkg/dpkg.cfg f4413ffb515f8f753624ae3bb365b81b
 /etc/logrotate.d/alternatives 5fe0af6ce1505fefdc158d9e5dbf6286
 /etc/logrotate.d/dpkg 9e25c8505966b5829785f34a548ae11f
Description: Debian package management system
 This package provides the low-level infrastructure for handling the
 installation and removal of Debian software packages.
 .
 For Debian package development tools, install dpkg-dev.
Homepage: https://wiki.debian.org/Teams/Dpkg
Original-Maintainer: Dpkg Developers <debian-dpkg@lists.debian.org>

Package: gcc-8-base
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 117
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gcc-8
Version: 8.4.0-1ubuntu1~18.04
Description: GCC, the GNU Compiler Collection (base package)
 This package contains files common to all languages and libraries
 contained in the GNU Compiler Collection (GCC).
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>

Package: python-cryptography
Status: install ok unpacked
Priority: optional
Section: python
Installed-Size: 1487
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 2.1.4-1ubuntu1.3
Depends: python (<< 2.8), python (>= 2.7~), python-asn1crypto, python-cffi-backend-api-min (<= 9729), python-cffi-backend-api-max (>= 9729), python-enum34, python-idna (>= 2.1), python-ipaddress, python-six (>= 1.4.1), python:any (<< 2.8), python:any (>= 2.7.5-5~), libc6 (>= 2.14), libssl1.1 (>= 1.1.1)
Suggests: python-cryptography-doc, python-cryptography-vectors
Breaks: python-openssl (<< 16.0.0)
Description: Python library exposing cryptographic recipes and primitives (Python 2)
 The cryptography library is designed to be a "one-stop-shop" for
 all your cryptographic needs in Python.
 .
 As an alternative to the libraries that came before it, cryptography
 tries to address some of the issues with those libraries:
  - Lack of PyPy and Python 3 support.
  - Lack of maintenance.
  - Use of poor implementations of algorithms (i.e. ones with known
    side-channel attacks).
  - Lack of high level, "Cryptography for humans", APIs.
  - Absence of algorithms such as AES-GCM.
  - Poor introspectability, and thus poor testability.
  - Extremely error prone APIs, and bad defaults.
 .
 This package contains the Python 2 version of cryptography.
Homepage: https://cryptography.io/
Original-Maintainer: Tristan Seligmann <mithrandi@debian.org>

Package: linux-tools-4.15.0-96-generic
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 475
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux
Version: 4.15.0-96.97
Depends: linux-tools-4.15.0-96
Description: Linux kernel version specific tools for version 4.15.0-96
 This package provides the architecture dependant parts for kernel
 version locked tools (such as perf and x86_energy_perf_policy) for
 version 4.15.0-96 on
 64 bit x86.

Package: openssl
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 1222
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1.1.1-1ubuntu2.1~18.04.5
Depends: libc6 (>= 2.15), libssl1.1 (>= 1.1.1)
Suggests: ca-certificates
Conffiles:
 /etc/ssl/openssl.cnf 61c17536f212862b4101ca83ae199157
Description: Secure Sockets Layer toolkit - cryptographic utility
 This package is part of the OpenSSL project's implementation of the SSL
 and TLS cryptographic protocols for secure communication over the
 Internet.
 .
 It contains the general-purpose command line binary /usr/bin/openssl,
 useful for cryptographic operations such as:
  * creating RSA, DH, and DSA key parameters;
  * creating X.509 certificates, CSRs, and CRLs;
  * calculating message digests;
  * encrypting and decrypting with ciphers;
  * testing SSL/TLS clients and servers;
  * handling S/MIME signed or encrypted mail.
Homepage: https://www.openssl.org/
Original-Maintainer: Debian OpenSSL Team <pkg-openssl-devel@lists.alioth.debian.org>

Package: wget
Status: install ok installed
Priority: standard
Section: web
Installed-Size: 932
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1.19.4-1ubuntu2.2
Depends: libc6 (>= 2.17), libidn2-0 (>= 0.6), libpcre3, libpsl5 (>= 0.16.0), libssl1.1 (>= 1.1.0), libuuid1 (>= 2.16)
Recommends: ca-certificates
Conflicts: wget-ssl
Conffiles:
 /etc/wgetrc c43064699caf6109f4b3da0405c06ebb
Description: retrieves files from the web
 Wget is a network utility to retrieve files from the web
 using HTTP(S) and FTP, the two most widely used internet
 protocols. It works non-interactively, so it will work in
 the background, after having logged off. The program supports
 recursive retrieval of web-authoring pages as well as FTP
 sites -- you can use Wget to make mirrors of archives and
 home pages or to travel the web like a WWW robot.
 .
 Wget works particularly well with slow or unstable connections
 by continuing to retrieve a document until the document is fully
 downloaded. Re-getting files from where it left off works on
 servers (both HTTP and FTP) that support it. Both HTTP and FTP
 retrievals can be time stamped, so Wget can see if the remote
 file has changed since the last retrieval and automatically
 retrieve the new version if it has.
 .
 Wget supports proxy servers; this can lighten the network load,
 speed up retrieval, and provide access behind firewalls.
Homepage: https://www.gnu.org/software/wget/
Original-Maintainer: Noël Köthe <noel@debian.org>

Package: libsqlite3-0
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 1181
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: sqlite3
Version: 3.22.0-1ubuntu0.3
Depends: libc6 (>= 2.14)
Description: SQLite 3 shared library
 SQLite is a C library that implements an SQL database engine.
 Programs that link with the SQLite library can have SQL database
 access without running a separate RDBMS process.
Homepage: http://www.sqlite.org/
Original-Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>

Package: python3-requests
Status: install ok unpacked
Priority: optional
Section: python
Installed-Size: 275
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: requests
Version: 2.18.4-2ubuntu0.1
Depends: python3-certifi, python3-chardet (<< 3.1.0), python3-idna, python3-urllib3 (<< 1.23), python3:any (>= 3.4~), ca-certificates, python3-chardet (>= 3.0.2), python3-urllib3 (>= 1.21.1)
Suggests: python3-cryptography, python3-idna (>= 2.5), python3-openssl, python3-socks
Breaks: awscli (<< 1.11.139)
Description: elegant and simple HTTP library for Python3, built for human beings
 Requests allow you to send HTTP/1.1 requests. You can add headers, form data,
 multipart files, and parameters with simple Python dictionaries, and access
 the response data in the same way. It's powered by httplib and urllib3, but
 it does all the hard work and crazy hacks for you.
 .
 Features
 .
   - International Domains and URLs
   - Keep-Alive & Connection Pooling
   - Sessions with Cookie Persistence
   - Browser-style SSL Verification
   - Basic/Digest Authentication
   - Elegant Key/Value Cookies
   - Automatic Decompression
   - Unicode Response Bodies
   - Multipart File Uploads
   - Connection Timeouts
 .
 This package contains the Python 3 version of the library.
Homepage: http://python-requests.org
Original-Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>

Package: apt
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 3866
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1.6.12
Replaces: apt-transport-https (<< 1.5~alpha4~), apt-utils (<< 1.3~exp2~)
Provides: apt-transport-https (= 1.6.12)
Depends: adduser, gpgv | gpgv2 | gpgv1, ubuntu-keyring, libapt-pkg5.0 (>= 1.6.12), libc6 (>= 2.15), libgcc1 (>= 1:3.0), libgnutls30 (>= 3.5.6), libseccomp2 (>= 1.0.1), libstdc++6 (>= 5.2)
Recommends: ca-certificates
Suggests: apt-doc, aptitude | synaptic | wajig, dpkg-dev (>= 1.17.2), gnupg | gnupg2 | gnupg1, powermgmt-base
Breaks: apt-transport-https (<< 1.5~alpha4~), apt-utils (<< 1.3~exp2~), aptitude (<< 0.8.10)
Conffiles:
 /etc/apt/apt.conf.d/01-vendor-ubuntu 5232396660502461fc834c0a1229dbe4
 /etc/apt/apt.conf.d/01autoremove 76120d358bc9037bb6358e737b3050b5
 /etc/cron.daily/apt-compat 49e9b2cfa17849700d4db735d04244f3
 /etc/kernel/postinst.d/apt-auto-removal 4ad976a68f045517cf4696cec7b8aa3a
 /etc/logrotate.d/apt 179f2ed4f85cbaca12fa3d69c2a4a1c3
Description: commandline package manager
 This package provides commandline tools for searching and
 managing as well as querying information about packages
 as a low-level access to all features of the libapt-pkg library.
 .
 These include:
  * apt-get for retrieval of packages and information about them
    from authenticated sources and for installation, upgrade and
    removal of packages together with their dependencies
  * apt-cache for querying available information about installed
    as well as installable packages
  * apt-cdrom to use removable media as a source for packages
  * apt-config as an interface to the configuration settings
  * apt-key as an interface to manage authentication keys
Original-Maintainer: APT Development Team <deity@lists.debian.org>

Package: libwebpdemux2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 36
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libwebp
Version: 0.6.1-2
Depends: libc6 (>= 2.14), libwebp6 (>= 0.5.1)
Description: Lossy compression of digital photographic images.
 Image Compression format, based on the VP8 codec.
 WebP uses the modern VP8 compression format to deliver efficient
 compression of images for the web. More than 30% extra gain over
 optimized JPEG, for same quality, is not unusual.
Original-Maintainer: Jeff Breidenbach <jab@debian.org>
Homepage: https://developers.google.com/speed/webp/

Package: awscli
Status: install ok unpacked
Priority: optional
Section: admin
Installed-Size: 3478
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.14.44-1ubuntu1
Depends: python3, python3-botocore (>= 1.3.9), python3-colorama, python3-docutils, python3-rsa, python3-s3transfer, python3-yaml, python3:any (>= 3.3.2-2~)
Description: Universal Command Line Environment for AWS
 This package provides a unified command line interface to many
 Amazon Web Services.
 .
 The currently supported services include:
 .
  * AWS CloudFormation
  * AWS Data Pipeline
  * AWS Direct Connect
  * AWS Elastic Beanstalk
  * AWS Identity and Access Management
  * AWS Import/Export
  * AWS OpsWorks
  * AWS Security Token Service
  * AWS Storage Gateway
  * Amazon CloudWatch
  * Amazon ElastiCache
  * Amazon Elastic Compute Cloud
  * Amazon Elastic MapReduce
  * Amazon Elastic Transcoder
  * Amazon Redshift
  * Amazon Relational Database Service (Beta)
  * Amazon Simple Email Service
  * Amazon Simple Notification Service
  * Amazon Simple Queue Service
  * Amazon Simple Storage Service
  * Amazon Simple Workflow Service
  * Auto Scaling
  * Elastic Load Balancing
Homepage: http://aws.amazon.com/cli/
Original-Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>

Package: diffutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 452
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1:3.6-1
Replaces: diff
Pre-Depends: libc6 (>= 2.17)
Suggests: diffutils-doc, wdiff
Description: File comparison utilities
 The diffutils package provides the diff, diff3, sdiff, and cmp programs.
 .
 `diff' shows differences between two files, or each corresponding file
 in two directories.  `cmp' shows the offsets and line numbers where
 two files differ.  `cmp' can also show all the characters that
 differ between the two files, side by side.  `diff3' shows differences
 among three files.  `sdiff' merges two files interactively.
 .
 The set of differences produced by `diff' can be used to distribute
 updates to text files (such as program source code) to other people.
 This method is especially useful when the differences are small compared
 to the complete files.  Given `diff' output, the `patch' program can
 update, or "patch", a copy of the file.
Original-Maintainer: Santiago Vila <sanvila@debian.org>
Homepage: http://www.gnu.org/software/diffutils/

Package: python-requests
Status: install ok unpacked
Priority: optional
Section: python
Installed-Size: 279
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: requests
Version: 2.18.4-2ubuntu0.1
Depends: python-certifi, python-chardet (>= 3.0.2), python-idna, python-urllib3 (>= 1.21.1), python:any (<< 2.8), python:any (>= 2.7.5-5~), ca-certificates, python-chardet (<< 3.1.0), python-urllib3 (<< 1.23)
Suggests: python-cryptography, python-idna (>= 2.5), python-openssl, python-socks
Breaks: httpie (<< 0.9.2)
Description: elegant and simple HTTP library for Python2, built for human beings
 Requests allow you to send HTTP/1.1 requests. You can add headers, form data,
 multipart files, and parameters with simple Python dictionaries, and access
 the response data in the same way. It's powered by httplib and urllib3, but
 it does all the hard work and crazy hacks for you.
 .
 Features
 .
   - International Domains and URLs
   - Keep-Alive & Connection Pooling
   - Sessions with Cookie Persistence
   - Browser-style SSL Verification
   - Basic/Digest Authentication
   - Elegant Key/Value Cookies
   - Automatic Decompression
   - Unicode Response Bodies
   - Multipart File Uploads
   - Connection Timeouts
Homepage: http://python-requests.org
Original-Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>

Package: libsensors4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 110
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: lm-sensors
Version: 1:3.4.0-4
Depends: libc6 (>= 2.14)
Suggests: lm-sensors
Conffiles:
 /etc/sensors.d/.placeholder d41d8cd98f00b204e9800998ecf8427e
 /etc/sensors3.conf 2380011501bd2ad9e44f070c80a4c74d
Description: library to read temperature/voltage/fan sensors
 Lm-sensors is a hardware health monitoring package for Linux. It allows you
 to access information from temperature, voltage, and fan speed sensors. It
 works with most newer systems.
 .
 This library is only functional with a Linux kernel, it is provided on
 non-Linux systems for portability reasons only.
 .
 This package contains a shared library for querying lm-sensors.
Original-Maintainer: Aurelien Jarno <aurel32@debian.org>
Homepage: http://www.lm-sensors.org

Package: tabix
Status: install ok unpacked
Priority: optional
Section: science
Installed-Size: 1692
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: htslib
Version: 1.7-2
Depends: libbz2-1.0, libc6 (>= 2.15), libcurl3-gnutls (>= 7.18.0), liblzma5 (>= 5.1.1alpha+20120614), libssl1.1 (>= 1.1.0), zlib1g (>= 1:1.2.0)
Description: generic indexer for TAB-delimited genome position files
 Tabix indexes files where some columns indicate sequence coordinates: name
 (usually a chromosome), start and stop. The input data file must be position
 sorted and compressed by bgzip (provided in this package), which has a gzip
 like interface. After indexing, tabix is able to quickly retrieve data lines by
 chromosomal coordinates. Fast data retrieval also works over network if an URI
 is given as a file name.
 .
 This version of tabix is built from the HTSlib source.
Original-Maintainer: Debian Med Packaging Team <debian-med-packaging@lists.alioth.debian.org>
Homepage: https://github.com/samtools/htslib

Package: python-cachecontrol
Status: install ok unpacked
Priority: optional
Section: python
Installed-Size: 68
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 0.11.7-1
Depends: python-requests, python:any (<< 2.8), python:any (>= 2.7.5-5~)
Description: caching algorithms in httplib2 for use with requests
 CacheControl is a port of the caching algorithms in httplib2 for use with
 requests session object.
 .
 It was written because httplib2's better support for caching is often
 mitigated by its lack of threadsafety. The same is true of requests in
 terms of caching.
 .
 This is the Python 2 library.
Original-Maintainer: Barry Warsaw <barry@debian.org>
Homepage: https://github.com/ionrock/cachecontrol

Package: libpam-modules
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 916
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: pam
Version: 1.1.8-3.6ubuntu2.18.04.1
Replaces: libpam-umask, libpam0g-util
Provides: libpam-mkhomedir, libpam-motd, libpam-umask
Pre-Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.27), libdb5.3, libpam0g (>= 1.1.3-2), libselinux1 (>= 2.1.9), debconf (>= 0.5) | debconf-2.0, libpam-modules-bin (= 1.1.8-3.6ubuntu2.18.04.1)
Recommends: update-motd
Conflicts: libpam-mkhomedir, libpam-motd, libpam-umask
Conffiles:
 /etc/security/access.conf 13ec4d189f0ed9acf3433977a53d446b
 /etc/security/group.conf f1e26e8db6f7abd2d697d7dad3422c36
 /etc/security/limits.conf 11c27ba00b7bd6a255f33126f75c5005
 /etc/security/namespace.conf 6424c99a62ddf4b7d3ca713bb06ded89
 /etc/security/namespace.init d9e6a7c85e966427ef23a04ec6c7000f
 /etc/security/pam_env.conf ddee4a931170dc21b4e0b9bb28e02a7b
 /etc/security/sepermit.conf d41c74654734a5c069a37bfc02f0a6d4
 /etc/security/time.conf 06e05c6079e839c8833ac7c3abfde192
Description: Pluggable Authentication Modules for PAM
 This package completes the set of modules for PAM. It includes the
  pam_unix.so module as well as some specialty modules.
Homepage: http://www.linux-pam.org/
Original-Maintainer: Steve Langasek <vorlon@debian.org>

Package: python3-urllib3
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 401
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-urllib3
Version: 1.22-1ubuntu0.18.04.1
Depends: python3:any (>= 3.3.2-2~), python3-six
Recommends: ca-certificates
Suggests: python3-cryptography, python3-idna, python3-openssl, python3-socks
Description: HTTP library with thread-safe connection pooling for Python3
 urllib3 supports features left out of urllib and urllib2 libraries.
 .
   - Re-use the same socket connection for multiple requests (HTTPConnectionPool
     and HTTPSConnectionPool) (with optional client-side certificate
     verification).
   - File posting (encode_multipart_formdata).
   - Built-in redirection and retries (optional).
   - Supports gzip and deflate decoding.
   - Thread-safe and sanity-safe.
   - Small and easy to understand codebase perfect for extending and
     building upon.
 .
 This package contains the Python 3 version of the library.
Homepage: http://urllib3.readthedocs.org
Original-Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>

Package: python3-jmespath
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 96
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-jmespath
Version: 0.9.3-1ubuntu1
Depends: python3:any (>= 3.3.2-2~)
Description: JSON Matching Expressions (Python 3)
 JMESPath is python library which allows you to declaratively specify how
 to extract elements from a JSON document.
 .
 This package contains the module for Python 3.
Homepage: https://github.com/boto/jmespath
Original-Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>

Package: libstdc++6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2041
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gcc-8
Version: 8.4.0-1ubuntu1~18.04
Replaces: libstdc++6-8-dbg (<< 4.9.0-3)
Depends: gcc-8-base (= 8.4.0-1ubuntu1~18.04), libc6 (>= 2.18), libgcc1 (>= 1:4.2)
Breaks: blockattack (<= 1.4.1+ds1-2.1build2), boo (<= 0.9.5~git20110729.r1.202a430-2), c++-annotations (<= 10.2.0-1), chromium-browser (<= 43.0.2357.130-0ubuntu2), clustalx (<= 2.1+lgpl-2), dff (<= 1.3.0+dfsg.1-4.1build2), emscripten (<= 1.22.1-1), ergo (<= 3.4.0-1), fceux (<= 2.2.2+dfsg0-1), flush (<= 0.9.12-3.1ubuntu1), freeorion (<= 0.4.4+git20150327-2), fslview (<= 4.0.1-4), fwbuilder (<= 5.1.0-4), gcc-4.3 (<< 4.3.6-1), gcc-4.4 (<< 4.4.6-4), gcc-4.5 (<< 4.5.3-2), gnote (<= 3.16.2-1), gnudatalanguage (<= 0.9.5-2build1), innoextract (<= 1.4-1build1), libantlr-dev (<= 2.7.7+dfsg-6), libapache2-mod-passenger (<= 4.0.53-1), libaqsis1 (<= 1.8.2-1), libassimp3 (<= 3.0~dfsg-4), libboost-date-time1.55.0, libcpprest2.2 (<= 2.2.0-1), libdap17 (<= 3.14.0-2), libdapclient6 (<= 3.14.0-2), libdapserver7 (<= 3.14.0-2), libdavix0 (<= 0.4.0-1build1), libdballe6 (<= 6.8-1), libdiet-admin2.8 (<= 2.8.0-1build3), libdiet-client2.8 (<= 2.8.0-1build3), libdiet-sed2.8 (<= 2.8.0-1build3), libfreefem++ (<= 3.37.1-1), libgazebo5 (<= 5.0.1+dfsg-2.1), libgetfem4++ (<= 4.2.1~beta1~svn4482~dfsg-3ubuntu3), libgmsh2 (<= 2.8.5+dfsg-1.1ubuntu1), libinsighttoolkit4.6 (<= 4.6.0-3ubuntu3), libkgeomap2 (<= 4:15.04.2-0ubuntu1), libkolabxml1 (<= 1.1.0-3), libkvkontakte1 (<= 1.0~digikam4.10.0-0ubuntu2), libmarisa0 (<= 0.2.4-8build1), libmediawiki1 (<= 1.0~digikam4.10.0-0ubuntu2), libogre-1.8.0 (<= 1.8.1+dfsg-0ubuntu5), libogre-1.9.0 (<= 1.9.0+dfsg1-4), libopenwalnut1 (<= 1.4.0~rc1+hg3a3147463ee2-1ubuntu2), libpqxx-4.0 (<= 4.0.1+dfsg-3ubuntu1), libreoffice-core (<= 1:4.4.4~rc3-0ubuntu1), librime1 (<= 1.2+dfsg-2), libwibble-dev (<= 1.1-1), libwreport2 (<= 2.14-1), libxmltooling6 (<= 1.5.3-2.1), lightspark (<= 0.7.2+git20150512-2), mira-assembler (<= 4.9.5-1), mongodb (<= 1:2.6.3-0ubuntu7), mongodb-server (<= 1:2.6.3-0ubuntu7), ncbi-blast+ (<= 2.2.30-4), openscad (<= 2014.03+dfsg-1build1), passepartout (<= 0.7.1-1.1), pdf2djvu (<= 0.7.19-1ubuntu2), photoprint (<= 0.4.2~pre2-2.3), plastimatch (<= 1.6.2+dfsg-1), plee-the-bear (<= 0.6.0-3.1), povray (<= 1:3.7.0.0-8), powertop (<= 2.6.1-1), printer-driver-brlaser (<= 3-3), psi4 (<= 4.0~beta5+dfsg-2build1), python-healpy (<= 1.8.1-1), python3-taglib (<= 0.3.6+dfsg-2build2), realtimebattle (<= 1.0.8-14), ruby-passenger (<= 4.0.53-1), sqlitebrowser (<= 3.5.1-3), tecnoballz (<= 0.93.1-6), wesnoth-1.12-core (<= 1:1.12.4-1), widelands (<= 1:18-3build1), xflr5 (<= 6.09.06-2)
Conflicts: scim (<< 1.4.2-1)
Description: GNU Standard C++ Library v3
 This package contains an additional runtime library for C++ programs
 built with the GNU compiler.
 .
 libstdc++-v3 is a complete rewrite from the previous libstdc++-v2, which
 was included up to g++-2.95. The first version of libstdc++-v3 appeared
 in g++-3.0.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>

Package: libkrb5-3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1011
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: krb5
Version: 1.16-2ubuntu0.1
Depends: libc6 (>= 2.16), libcom-err2 (>= 1.34), libk5crypto3 (>= 1.15~beta1), libkeyutils1 (>= 1.5.9), libkrb5support0 (= 1.16-2ubuntu0.1)
Recommends: krb5-locales
Suggests: krb5-doc, krb5-user
Breaks: libsmbclient (<= 2:3.6.1-2), sssd (<= 1.2.1-4.3)
Description: MIT Kerberos runtime libraries
 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service.  That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the runtime library for the main Kerberos v5 API
 used by applications and Kerberos clients.
Homepage: http://web.mit.edu/kerberos/
Original-Maintainer: Sam Hartman <hartmans@debian.org>

Package: binutils
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 102
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 2.30-21ubuntu1~18.04.2
Provides: binutils-gold, elf-binutils
Depends: libc6 (>= 2.27), zlib1g (>= 1:1.1.4), binutils-common (= 2.30-21ubuntu1~18.04.2), libbinutils (= 2.30-21ubuntu1~18.04.2), binutils-x86-64-linux-gnu (= 2.30-21ubuntu1~18.04.2)
Suggests: binutils-doc (>= 2.30-21ubuntu1~18.04.2)
Conflicts: binutils-mingw-w64-i686 (<< 2.23.52.20130612-1+3), binutils-mingw-w64-x86-64 (<< 2.23.52.20130612-1+3), binutils-multiarch (<< 2.27-8), modutils (<< 2.4.19-1)
Description: GNU assembler, linker and binary utilities
 The programs in this package are used to assemble, link and manipulate
 binary and object files.  They may be used in conjunction with a compiler
 and various libraries to build programs.
Homepage: https://www.gnu.org/software/binutils/
Original-Maintainer: Matthias Klose <doko@debian.org>

Package: libffi6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 52
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libffi
Version: 3.2.1-8
Depends: libc6 (>= 2.14)
Description: Foreign Function Interface library runtime
 A foreign function interface is the popular name for the interface that
 allows code written in one language to call code written in another
 language.
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>

Package: libaudit-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 23
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: audit
Version: 1:2.8.2-1ubuntu1
Replaces: libaudit0, libaudit1 (<< 1:2.2.1-2)
Breaks: libaudit0, libaudit1 (<< 1:2.2.1-2)
Conffiles:
 /etc/libaudit.conf cdc703f9d27f0d980271a9e95d0f18b2
Description: Dynamic library for security auditing - common files
 The audit-libs package contains the dynamic libraries needed for
 applications to use the audit framework. It is used to monitor systems for
 security related events.
 .
 This package contains the libaudit.conf configuration file and the associated
 manpage.
Homepage: https://people.redhat.com/sgrubb/audit/
Original-Maintainer: Laurent Bigonville <bigon@debian.org>

Package: python-schema-salad
Status: install ok unpacked
Priority: optional
Section: python
Installed-Size: 3277
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 2.6.20171201034858-3
Depends: python-cachecontrol, python-lockfile, python-mistune, python-pkg-resources, python-rdflib, python-rdflib-jsonld, python-requests, python-ruamel.yaml, python-six (>= 1.8.0), python-typing, python:any (<< 2.8), python:any (>= 2.7.5-5~), python-avro, libjs-bootstrap
Recommends: cwltool
Description: Schema Annotations for Linked Avro Data (SALAD)
 Salad is a schema language for describing JSON or YAML structured linked data
 documents. Salad is based originally on JSON-LD and the Apache Avro data
 serialization system.
 .
 Salad schema describes rules for preprocessing, structural validation, and
 link checking for documents described by a Salad schema. Salad features for
 rich data modeling such as inheritance, template specialization, object
 identifiers, object references, documentation generation, and transformation
 to RDF. Salad provides a bridge between document and record oriented data
 modeling and the Semantic Web.
Original-Maintainer: Debian Med Packaging Team <debian-med-packaging@lists.alioth.debian.org>
Homepage: http://www.commonwl.org

Package: libjs-bootstrap
Status: install ok installed
Priority: optional
Section: web
Installed-Size: 1055
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: twitter-bootstrap3
Version: 3.3.7+dfsg-2
Description: HTML, CSS and JS framework
 Bootstrap is a popular HTML, CSS, and JS framework for developing
 responsive, mobile first projects on the web.
 .
 It includes base CSS and HTML for typography, forms, buttons, tables,
 grids, navigation, and more.
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Homepage: http://getbootstrap.com/

Package: libc-dev-bin
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 418
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: glibc
Version: 2.27-3ubuntu1
Depends: libc6 (>> 2.27), libc6 (<< 2.28)
Recommends: manpages, manpages-dev
Description: GNU C Library: Development binaries
 This package contains utility programs related to the GNU C Library
 development package.
Homepage: https://www.gnu.org/software/libc/libc.html
Original-Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>

Package: libkrb5-26-heimdal
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 645
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: heimdal
Version: 7.5.0+dfsg-1
Depends: libasn1-8-heimdal (>= 1.6~git20131117), libc6 (>= 2.15), libcomerr2 (>= 1.41.11), libhcrypto4-heimdal (>= 1.7~git20161112), libheimbase1-heimdal (>= 1.6~git20131117), libhx509-5-heimdal (>= 1.4.0+git20110226), libroken18-heimdal (>= 1.7~git20160418), libsqlite3-0 (>= 3.5.9), libwind0-heimdal (>= 1.6~git20120311)
Description: Heimdal Kerberos - libraries
 Heimdal is a free implementation of Kerberos 5 that aims to be
 compatible with MIT Kerberos.
 .
 This package contains the Kerberos 5 library.
Original-Maintainer: Brian May <bam@debian.org>
Homepage: http://www.h5l.org/

Package: findutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 580
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 4.6.0+git+20170828-2
Pre-Depends: libc6 (>= 2.17), libselinux1 (>= 1.32)
Suggests: mlocate | locate
Breaks: binstats (<< 1.08-8.1), guilt (<< 0.36-0.2), libpython3.4-minimal (<< 3.4.4-2), libpython3.5-minimal (<< 3.5.1-3), lsat (<< 0.9.7.1-2.1), mc (<< 3:4.8.11-1), switchconf (<< 0.0.9-2.1)
Description: utilities for finding files--find, xargs
 GNU findutils provides utilities to find files meeting specified
 criteria and perform various actions on the files which are found.
 This package contains 'find' and 'xargs'; however, 'locate' has
 been split off into a separate package.
Original-Maintainer: Andreas Metzler <ametzler@debian.org>
Homepage: https://savannah.gnu.org/projects/findutils/

Package: libpam0g
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 212
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: pam
Version: 1.1.8-3.6ubuntu2.18.04.1
Replaces: libpam0g-util
Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.14), debconf (>= 0.5) | debconf-2.0
Suggests: libpam-doc
Description: Pluggable Authentication Modules library
 Contains the shared library for Linux-PAM, a library that enables the
 local system administrator to choose how applications authenticate users.
 In other words, without rewriting or recompiling a PAM-aware application,
 it is possible to switch between the authentication mechanism(s) it uses.
 One may entirely upgrade the local authentication system without touching
 the applications themselves.
Homepage: http://www.linux-pam.org/
Original-Maintainer: Steve Langasek <vorlon@debian.org>

Package: python-lockfile
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 64
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1:0.12.2-2
Depends: python:any (<< 2.8), python:any (>= 2.7.5-5~)
Suggests: python-lockfile-doc
Description: file locking library for Python — Python 2 library
 The ‘lockfile’ library exports a ‘LockFile’ class which provides a
 simple API for locking files.
 .
 The appropriate implementation for ‘LockFile’ is chosen automatically
 based on the OS capabilities for an atomic filesystem operation.
 These implementations are also available for explicit use as
 ‘LinkLockFile’ and ‘MkdirLockFile’.
 .
 Other back ends are possible with the same semantics. Examples
 included are:
  * ‘SQLiteLockFile’, using records in an SQLite database.
  * ‘PIDLockFile’, using the semantics of a Unix PID file.
 .
 Unlike other Python locking libraries (the Windows ‘msvcrt.locking’
 function, the Unix ‘fcntl.flock’, ‘fcntl.lockf’, and the deprecated
 ‘posixfile’ module), the API is identical across both Unix (including
 GNU/Linux and MacOS) and Windows platforms.
 .
 This package installs the Python 2 library.
Original-Maintainer: Ben Finney <bignose@debian.org>
Homepage: https://pypi.python.org/pypi/lockfile/

Package: xml-core
Status: install ok triggers-awaited
Priority: optional
Section: text
Installed-Size: 117
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 0.18
Depends: sed (>= 4.1.2-8), sgml-base (>= 1.28)
Suggests: debhelper (>= 9.20120909)
Conffiles:
 /etc/sgml/xml-core.cat 055ba0bd3154c0a58b9bf8a0c9ecf2fa
Description: XML infrastructure and XML catalog file support
 This package creates the XML infrastructure directories and provides
 XML catalog file support in compliance with the current Debian XML
 Policy draft:
 .
   * infrastructure directories:
      - /etc/xml
      - /usr/share/xml/{declaration,entities,misc,schema}
      - /usr/local/share/xml/{declaration,entities,misc,schema}
 .
   * XML catalog schema: OASIS XML Catalog Committee Specification 1.0
 .
   * update-xmlcatalog(8): tool for maintaining the root XML catalog
     file and the package XML catalog files in the '/etc/xml' directory
     as well as local XML catalog files.
 .
   * dh_installxmlcatalogs(1): debhelper tool for installing local XML
     catalog files and registering XML entities in package XML catalog
     files and the root XML catalog file (requires debhelper package)
Triggers-Awaited: sgml-base
Original-Maintainer: Debian QA Group <packages@qa.debian.org>

Package: libgdbm-compat4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 38
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gdbm
Version: 1.14.1-6
Depends: libc6 (>= 2.14), libgdbm5 (>= 1.14)
Description: GNU dbm database routines (legacy support runtime version) 
 GNU dbm ('gdbm') is a library of database functions that use extendible
 hashing and works similarly to the standard UNIX 'dbm' functions.
 .
 The basic use of 'gdbm' is to store key/data pairs in a data file, thus
 providing a persistent version of the 'dictionary' Abstract Data Type
 ('hash' to perl programmers).
 .
 This package includes library files, required to run old programs,
 that use legacy 'dbm' interface. For new programs, please use modern
 interface, provided by libgdbm5 and libgdbm-dev.
Original-Maintainer: Dmitry Bogatov <KAction@gnu.org>
Homepage: https://gnu.org/software/gdbm

Package: libcap-ng0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 36
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libcap-ng
Version: 0.7.7-3.1
Depends: libc6 (>= 2.8)
Description: An alternate POSIX capabilities library
 This library implements the user-space interfaces to the POSIX
 1003.1e capabilities available in Linux kernels.  These capabilities are
 a partitioning of the all powerful root privilege into a set of distinct
 privileges.
 .
 The libcap-ng library is intended to make programming with POSIX
 capabilities much easier than the traditional libcap library.
 .
 This package contains header files and libraries for libcap-ng.
Original-Maintainer: Pierre Chifflier <pollux@debian.org>
Homepage: http://people.redhat.com/sgrubb/libcap-ng

Package: linux-tools-generic
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 16
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-meta
Version: 4.15.0.96.87
Provides: linux-tools
Depends: linux-tools-4.15.0-96-generic
Description: Generic Linux kernel tools
 This package will always depend on the latest generic kernel tools
 available.

Package: libmount1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 433
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: util-linux
Version: 2.31.1-0.4ubuntu3.6
Depends: libblkid1 (>= 2.17.2), libc6 (>= 2.25), libselinux1 (>= 2.6-3~)
Description: device mounting library
 This device mounting library is used by mount and umount helpers.
Original-Maintainer: LaMont Jones <lamont@debian.org>

Package: python-html5lib
Status: install ok unpacked
Priority: optional
Section: python
Installed-Size: 529
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: html5lib
Version: 0.999999999-1
Depends: python-pkg-resources, python-six, python-webencodings, python:any (<< 2.8), python:any (>= 2.7.5-5~)
Suggests: python-chardet, python-genshi, python-lxml
Description: HTML parser/tokenizer based on the WHATWG HTML5 specification
 html5lib is a pure-python library for parsing HTML. It is designed to
 conform to the HTML 5 specification, which has formalized the error handling
 algorithms of popular web browsers.
 .
 This package contains the Python 2 version of html5lib.
Original-Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Homepage: https://github.com/html5lib/html5lib-python

Package: libkeyutils1
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 36
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: keyutils
Version: 1.5.9-9.2ubuntu2
Depends: libc6 (>= 2.14)
Description: Linux Key Management Utilities (library)
 Keyutils is a set of utilities for managing the key retention facility in the
 kernel, which can be used by filesystems, block devices and more to gain and
 retain the authorization and encryption keys required to perform secure
 operations.
 .
 This package provides a wrapper library for the key management facility system
 calls.
Homepage: http://people.redhat.com/~dhowells/keyutils/
Original-Maintainer: Christian Kastner <ckk@debian.org>

Package: samtools
Status: install ok unpacked
Priority: optional
Section: science
Installed-Size: 810
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1.7-1
Depends: libc6 (>= 2.14), libhts2 (>= 1.7-1), libncurses5 (>= 6), libtinfo5 (>= 6), zlib1g (>= 1:1.1.4)
Recommends: python, cwltool
Description: processing sequence alignments in SAM and BAM formats
 Samtools is a set of utilities that manipulate nucleotide sequence alignments
 in the binary BAM format. It imports from and exports to the ascii SAM
 (Sequence Alignment/Map) format, does sorting, merging and indexing, and allows
 one to retrieve reads in any regions swiftly. It is designed to work on a
 stream, and is able to open a BAM (not SAM) file on a remote FTP or HTTP
 server.
Original-Maintainer: Debian Med Packaging Team <debian-med-packaging@lists.alioth.debian.org>
Homepage: http://www.htslib.org/

Package: libsasl2-modules
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 224
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: cyrus-sasl2
Version: 2.1.27~101-g0780600+dfsg-3ubuntu2.1
Depends: libc6 (>= 2.14), libssl1.1 (>= 1.1.0)
Suggests: libsasl2-modules-gssapi-mit | libsasl2-modules-gssapi-heimdal, libsasl2-modules-ldap, libsasl2-modules-otp, libsasl2-modules-sql
Breaks: logcheck-database (<= 1.3.16~)
Conffiles:
 /etc/logcheck/ignore.d.server/libsasl2-modules c032d5205f090a30661ae9f82a03f36e
Description: Cyrus SASL - pluggable authentication modules
 This is the Cyrus SASL API implementation, version 2.1. See package
 libsasl2-2 and RFC 2222 for more information.
 .
 This package provides the following SASL modules: LOGIN, PLAIN, ANONYMOUS,
 NTLM, CRAM-MD5, and DIGEST-MD5 (with DES support).
Homepage: https://www.cyrusimap.org/
Original-Maintainer: Debian Cyrus SASL Team <pkg-cyrus-sasl2-debian-devel@lists.alioth.debian.org>

Package: login
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 1212
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: shadow
Version: 1:4.5-1ubuntu2
Replaces: manpages-de (<< 0.5-3), manpages-tr (<< 1.0.5), manpages-zh (<< 1.5.1-1)
Pre-Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.14), libpam0g (>= 0.99.7.1), libpam-runtime, libpam-modules (>= 1.1.8-1)
Conflicts: amavisd-new (<< 2.3.3-8), backupninja (<< 0.9.3-5), echolot (<< 2.1.8-4), gnunet (<< 0.7.0c-2), python-4suite (<< 0.99cvs20060405-1)
Conffiles:
 /etc/login.defs 2a8f6cd8e00f54df72dc345a23f9db20
 /etc/pam.d/login 1fd6cb4d4267a68148ee9973510a9d3e
 /etc/pam.d/su ce6dcfda3b190a27a455bb38a45ff34a
 /etc/securetty d0124b1d2fb22d4ac9a91aa02ae6d6db
Description: system login tools
 These tools are required to be able to login and use your system. The
 login program invokes your user shell and enables command execution. The
 newgrp program is used to change your effective group ID (useful for
 workgroup type situations). The su program allows changing your effective
 user ID (useful being able to execute commands as another user).
Homepage: https://github.com/shadow-maint/shadow
Original-Maintainer: Shadow package maintainers <pkg-shadow-devel@lists.alioth.debian.org>

Package: bc
Status: install ok installed
Priority: standard
Section: math
Installed-Size: 218
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1.07.1-2
Depends: libc6 (>= 2.14), libreadline7 (>= 6.0)
Description: GNU bc arbitrary precision calculator language
 GNU bc is an interactive algebraic language with arbitrary precision which
 follows the POSIX 1003.2 draft standard, with several extensions including
 multi-character variable names, an `else' statement and full Boolean
 expressions.  GNU bc does not require the separate GNU dc program.
Original-Maintainer: Ryan Kavanagh <rak@debian.org>
Homepage: http://ftp.gnu.org/gnu/bc/

Package: libgssapi3-heimdal
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 312
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: heimdal
Version: 7.5.0+dfsg-1
Depends: libasn1-8-heimdal (>= 1.4.0+git20110226), libc6 (>= 2.14), libcomerr2 (>= 1.01), libhcrypto4-heimdal (>= 1.4.0+git20110226), libheimntlm0-heimdal (>= 1.4.0+git20110226), libkrb5-26-heimdal (>= 1.6~git20131117), libroken18-heimdal (>= 1.4.0+git20110226)
Conflicts: libgssapi3
Description: Heimdal Kerberos - GSSAPI support library
 Heimdal is a free implementation of Kerberos 5 that aims to be
 compatible with MIT Kerberos.
 .
 This package contains the library for GSSAPI support.
Original-Maintainer: Brian May <bam@debian.org>
Homepage: http://www.h5l.org/

Package: libpython2.7-minimal
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 2782
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: python2.7
Version: 2.7.17-1~18.04
Replaces: libpython2.7-stdlib (<< 2.7.8-7), python2.7 (<< 2.7.4-2), python2.7-minimal (<< 2.7.3-10)
Recommends: libpython2.7-stdlib
Breaks: python2.7-minimal (<< 2.7.4~rc1-1~)
Conflicts: binfmt-support (<< 1.1.2)
Conffiles:
 /etc/python2.7/sitecustomize.py d6b276695157bde06a56ba1b2bc53670
Description: Minimal subset of the Python language (version 2.7)
 This package contains some essential modules. It is normally not
 used on it's own, but as a dependency of python2.7-minimal.
Original-Maintainer: Matthias Klose <doko@debian.org>

Package: libpci3
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 99
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: pciutils
Version: 1:3.5.2-1ubuntu1.1
Replaces: libpci2
Provides: libpci2
Depends: libc6 (>= 2.14), libudev1 (>= 196), zlib1g (>= 1:1.1.4)
Conflicts: libpci2
Description: Linux PCI Utilities (shared library)
 This package contains the libpci shared library files.
 .
 The libpci library provides portable access to configuration
 registers of devices connected to the PCI bus.
Homepage: http://atrey.karlin.mff.cuni.cz/~mj/pciutils.shtml
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>

Package: adduser
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 624
Maintainer: Ubuntu Core Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 3.116ubuntu1
Depends: passwd, debconf (>= 0.5) | debconf-2.0
Suggests: liblocale-gettext-perl, perl, ecryptfs-utils (>= 67-1)
Conffiles:
 /etc/deluser.conf 773fb95e98a27947de4a95abb3d3f2a2
Description: add and remove users and groups
 This package includes the 'adduser' and 'deluser' commands for creating
 and removing users.
 .
  - 'adduser' creates new users and groups and adds existing users to
    existing groups;
  - 'deluser' removes users and groups and removes users from a given
    group.
 .
 Adding users with 'adduser' is much easier than adding them manually.
 Adduser will choose appropriate UID and GID values, create a home
 directory, copy skeletal user configuration, and automate setting
 initial values for the user's password, real name and so on.
 .
 Deluser can back up and remove users' home directories
 and mail spool or all the files they own on the system.
 .
 A custom script can be executed after each of the commands.
 .
  Development mailing list:
    http://lists.alioth.debian.org/mailman/listinfo/adduser-devel/
Homepage: http://alioth.debian.org/projects/adduser/
Original-Maintainer: Debian Adduser Developers <adduser-devel@lists.alioth.debian.org>

Package: python-ipaddress
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 101
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.0.17-1
Depends: python:any (<< 2.8), python:any (>= 2.7.5-5~)
Description: Backport of Python 3 ipaddress module (Python 2)
 This module is a backport of the stdlib "ipaddress" module from Python 3. The
 "ipaddress" module is in turn based off of the "ipaddr" module available in
 the "python-ipaddr" but there are some important API differences; make sure
 you are using the right module.
 .
 This package contains the Python 2 module.
Original-Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Homepage: https://github.com/phihag/ipaddress

Package: libext2fs2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 452
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: e2fsprogs
Version: 1.44.1-1ubuntu1.3
Replaces: e2fslibs (<< 1.43.9-1~)
Provides: e2fslibs (= 1.44.1-1ubuntu1.3)
Depends: libc6 (>= 2.17)
Breaks: e2fslibs (<< 1.43.9-1~)
Description: ext2/ext3/ext4 file system libraries
 The ext2, ext3 and ext4 file systems are successors of the original ext
 ("extended") file system. They are the main file system types used for
 hard disks on Debian and other Linux systems.
 .
 This package provides the ext2fs and e2p libraries, for userspace software
 that directly accesses extended file systems. Programs that use libext2fs
 include e2fsck, mke2fs, and tune2fs. Programs that use libe2p include
 dumpe2fs, chattr, and lsattr.
Homepage: http://e2fsprogs.sourceforge.net
Original-Maintainer: Theodore Y. Ts'o <tytso@mit.edu>

Package: ca-certificates
Status: install ok triggers-pending
Priority: optional
Section: misc
Installed-Size: 392
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 20180409
Depends: openssl (>= 1.1.0), debconf (>= 0.5) | debconf-2.0
Breaks: ca-certificates-java (<< 20121112+nmu1)
Enhances: openssl
Description: Common CA certificates
 Contains the certificate authorities shipped with Mozilla's browser to allow
 SSL-based applications to check for the authenticity of SSL connections.
 .
 Please note that Debian can neither confirm nor deny whether the
 certificate authorities whose certificates are included in this package
 have in any way been audited for trustworthiness or RFC 3647 compliance.
 Full responsibility to assess them belongs to the local system
 administrator.
Triggers-Pending: update-ca-certificates
Original-Maintainer: Michael Shuler <michael@pbandjelly.org>

Package: libacl1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 57
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: acl
Version: 2.2.52-3build1
Depends: libattr1 (>= 1:2.4.46-8), libc6 (>= 2.14)
Conflicts: acl (<< 2.0.0), libacl1-kerberos4kth
Description: Access control list shared library
 This package contains the libacl.so dynamic library containing
 the POSIX 1003.1e draft standard 17 functions for manipulating
 access control lists.
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Homepage: http://savannah.nongnu.org/projects/acl/

Package: manpages-dev
Status: install ok installed
Priority: optional
Section: doc
Installed-Size: 3820
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: manpages
Version: 4.15-1
Replaces: libbsd-dev (<< 0.8.4-1), manpages (<< 4.13-3)
Depends: manpages
Suggests: man-browser
Breaks: libbsd-dev (<< 0.8.4-1), manpages (<< 4.13-3)
Description: Manual pages about using GNU/Linux for development
 These man pages describe the Linux programming interface, including
 these two sections:
  2 = Linux system calls.
  3 = Library calls (note that a more comprehensive source of information
      may be found in the glibc-doc and glibc-doc-reference packages).
Original-Maintainer: Martin Schulze <joey@debian.org>
Homepage: https://www.kernel.org/doc/man-pages/

Package: ncurses-bin
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 576
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: ncurses
Version: 6.1-1ubuntu1.18.04
Pre-Depends: libc6 (>= 2.14), libtinfo5 (>= 6.1)
Description: terminal-related programs and man pages
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the programs used for manipulating the terminfo
 database and individual terminfo entries, as well as some programs for
 resetting terminals and such.
Homepage: https://invisible-island.net/ncurses/
Original-Maintainer: Craig Small <csmall@debian.org>

Package: libc6-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 18812
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: glibc
Version: 2.27-3ubuntu1
Provides: libc-dev
Depends: libc6 (= 2.27-3ubuntu1), libc-dev-bin (= 2.27-3ubuntu1), linux-libc-dev
Suggests: glibc-doc, manpages-dev
Breaks: binutils (<< 2.26), binutils-gold (<< 2.20.1-11), cmake (<< 2.8.4+dfsg.1-5), gcc-4.4 (<< 4.4.6-4), gcc-4.5 (<< 4.5.3-2), gcc-4.6 (<< 4.6.0-12), libhwloc-dev (<< 1.2-3), libjna-java (<< 3.2.7-4), liblouis-dev (<< 2.3.0-2), liblouisxml-dev (<< 2.4.0-2), libperl5.26 (<< 5.26.1-3), make (<< 3.81-8.1), pkg-config (<< 0.26-1)
Conflicts: libc0.1-dev, libc0.3-dev, libc6.1-dev
Description: GNU C Library: Development Libraries and Header Files
 Contains the symlinks, headers, and object files needed to compile
 and link programs which use the standard C library.
Homepage: https://www.gnu.org/software/libc/libc.html
Original-Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>

Package: libslang2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1544
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: slang2
Version: 2.3.1a-3ubuntu1
Depends: libc6 (>= 2.14)
Description: S-Lang programming library - runtime version
 S-Lang is a C programmer's library that includes routines for the rapid
 development of sophisticated, user friendly, multi-platform applications.
 .
 This package contains only the shared library libslang.so.* and copyright
 information. It is only necessary for programs that use this library (such
 as jed and slrn). If you plan on doing development with S-Lang, you will
 need the companion -dev package as well.
Built-Using: unicode-data (= 10.0.0-3)
Homepage: http://www.jedsoft.org/slang/
Original-Maintainer: Alastair McKinstry <mckinstry@debian.org>

Package: cron
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 247
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 3.0pl1-128.1ubuntu1
Provides: cron-daemon
Depends: libc6 (>= 2.7), libpam0g (>= 0.99.7.1), libselinux1 (>= 1.32), debianutils (>= 1.7), adduser, lsb-base (>= 3.0-10), libpam-runtime (>= 1.0.1-11)
Pre-Depends: dpkg (>= 1.15.7.2)
Suggests: anacron (>= 2.0-1), logrotate, checksecurity, exim4 | postfix | mail-transport-agent
Breaks: dpkg (<< 1.15.4)
Conffiles:
 /etc/cron.d/.placeholder e5e12910bf011222160404d7bdb824f2
 /etc/cron.daily/.placeholder e5e12910bf011222160404d7bdb824f2
 /etc/cron.hourly/.placeholder e5e12910bf011222160404d7bdb824f2
 /etc/cron.monthly/.placeholder e5e12910bf011222160404d7bdb824f2
 /etc/cron.weekly/.placeholder e5e12910bf011222160404d7bdb824f2
 /etc/crontab 8f111d100ea459f68d333d63a8ef2205
 /etc/default/cron bc9ab63f9e143d7338909d50494d552f
 /etc/init.d/cron 85d7a3783889ea93dcda2fb488420c1c
 /etc/pam.d/cron 11e788a7f7cd5477b10da2c7fd5ecdf0
Description: process scheduling daemon
 The cron daemon is a background process that runs particular programs at
 particular times (for example, every minute, day, week, or month), as
 specified in a crontab. By default, users may also create crontabs of
 their own so that processes are run on their behalf.
 .
 Output from the commands is usually mailed to the system administrator
 (or to the user in question); you should probably install a mail system
 as well so that you can receive these messages.
 .
 This cron package does not provide any system maintenance tasks. Basic
 periodic maintenance tasks are provided by other packages, such
 as checksecurity.
Homepage: http://ftp.isc.org/isc/cron/
Original-Maintainer: Maintainer: Javier Fernández-Sanguino Peña <jfs@debian.org>

Package: pigz
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 253
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 2.4-1
Depends: libc6 (>= 2.14), zlib1g (>= 1:1.2.6)
Pre-Depends: dpkg (>= 1.15.6)
Description: Parallel Implementation of GZip
 pigz, which stands for Parallel Implementation of GZip, is a fully functional
 replacement for gzip that takes advantage of multiple processors and multiple
 cores when compressing data.
Original-Maintainer: Eduard Bloch <blade@debian.org>
Homepage: http://zlib.net/pigz/

Package: libc-ares2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 91
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: c-ares
Version: 1.14.0-1
Replaces: libc-ares1
Depends: libc6 (>= 2.17)
Conflicts: libcares2
Description: asynchronous name resolver
 c-ares is a C library that performs DNS requests and name resolution
 asynchronously.
 .
 It is a fork of the library named "ares", with additional features:
  * IPv6 support;
  * extended cross-platform portability;
  * 64-bit clean sources.
 .
 This package provides the shared libraries.
Original-Maintainer: Gregor Jasny <gjasny@googlemail.com>
Homepage: https://c-ares.haxx.se/

Package: libhts2
Status: install ok unpacked
Priority: optional
Section: libs
Installed-Size: 737
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: htslib
Version: 1.7-2
Depends: libbz2-1.0, libc6 (>= 2.23), libcurl3-gnutls (>= 7.18.0), liblzma5 (>= 5.1.1alpha+20120614), libssl1.1 (>= 1.1.0), zlib1g (>= 1:1.2.0)
Description: C library for high-throughput sequencing data formats
 HTSlib is an implementation of a unified C library for accessing common file
 formats, such as SAM (Sequence Alignment/Map), CRAM and VCF (Variant Call
 Format), used for high-throughput sequencing data, and is the core library
 used by samtools and bcftools. HTSlib only depends on zlib. It is known to be
 compatible with gcc, g++ and clang.
 .
 HTSlib implements a generalized BAM (binary SAM) index, with file extension
 ‘csi’ (coordinate-sorted index). The HTSlib file reader first looks for the
 new index and then for the old if the new index is absent.
Original-Maintainer: Debian Med Packaging Team <debian-med-packaging@lists.alioth.debian.org>
Homepage: https://github.com/samtools/htslib

Package: python-webencodings
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 55
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 0.5-2
Depends: python:any (<< 2.8), python:any (>= 2.7.5-5~)
Description: Python implementation of the WHATWG Encoding standard
 In order to be compatible with legacy web content when interpreting something
 like Content-Type: text/html; charset=latin1, tools need to use a particular
 set of aliases for encoding labels as well as some overriding rules.  For
 example, US-ASCII and iso-8859-1 on the web are actually aliases for
 windows-1252, and an UTF-8 or UTF-16 BOM takes precedence over any other
 encoding declaration.  The Encoding standard defines all such details so that
 implementations do not have to reverse-engineer each other.
 .
 This module has encoding labels and BOM detection, but the actual
 implementation for encoders and decoders is Python’s.
 .
 This package provides the module for Python 2.
Original-Maintainer: Barry Warsaw <barry@debian.org>
Homepage: https://github.com/SimonSapin/python-webencodings

Package: libheimntlm0-heimdal
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 77
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: heimdal
Version: 7.5.0+dfsg-1
Depends: libc6 (>= 2.4), libhcrypto4-heimdal (>= 1.4.0+git20110226), libkrb5-26-heimdal (>= 1.4.0+git20110226), libroken18-heimdal (>= 1.4.0+git20110226), libwind0-heimdal (>= 1.4.0+git20110226)
Description: Heimdal Kerberos - NTLM support library
 Heimdal is a free implementation of Kerberos 5 that aims to be
 compatible with MIT Kerberos.
 .
 This package contains the NTLM support library.
Original-Maintainer: Brian May <bam@debian.org>
Homepage: http://www.h5l.org/

Package: libsepol1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 720
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libsepol
Version: 2.7-1
Depends: libc6 (>= 2.14)
Description: SELinux library for manipulating binary security policies
 Security-enhanced Linux is a patch of the Linux kernel and a number
 of utilities with enhanced security functionality designed to add
 mandatory access controls to Linux.  The Security-enhanced Linux
 kernel contains new architectural components originally developed to
 improve the security of the Flask operating system. These
 architectural components provide general support for the enforcement
 of many kinds of mandatory access control policies, including those
 based on the concepts of Type Enforcement®, Role-based Access
 Control, and Multi-level Security.
 .
 libsepol provides an API for the manipulation of SELinux binary policies.
 It is used by checkpolicy (the policy compiler) and similar tools, as well
 as by programs like load_policy that need to perform specific transformations
 on binary policies such as customizing policy boolean settings.
Original-Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>
Homepage: http://userspace.selinuxproject.org/

Package: libpython2.7-stdlib
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 8777
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: python2.7
Version: 2.7.17-1~18.04
Replaces: libpython2.7-testsuite (<< 2.7.13-4), python2.7 (<< 2.7.5-0~)
Provides: python-argparse, python2.7-argparse, python2.7-celementtree, python2.7-cjkcodecs, python2.7-ctypes, python2.7-elementtree, python2.7-profiler, python2.7-wsgiref
Depends: libpython2.7-minimal (= 2.7.17-1~18.04), libssl1.1 (>= 1.1.1), mime-support, libbz2-1.0, libc6 (>= 2.15), libdb5.3, libexpat1 (>= 2.1~beta3), libffi6 (>= 3.0.4), libncursesw5 (>= 6), libreadline7 (>= 7.0~beta), libsqlite3-0 (>= 3.5.9), libtinfo5 (>= 6)
Breaks: cython (<< 0.25.2-2build3), python-lxml (<< 3.8.0-2), python-numpy (<< 1:1.12.1-3.1ubuntu1), python-scipy (<< 0.18.1-2ubuntu3), python-tk (<< 2.7.14~rc1-1~), python-urllib3 (<< 1.9.1-3)
Description: Interactive high-level object-oriented language (standard library, version 2.7)
 Python is a high-level, interactive, object-oriented language. Its 2.7 version
 includes an extensive class library with lots of goodies for
 network programming, system administration, sounds and graphics.
 .
 This package contains Python 2.7's standard library. It is normally not
 used on its own, but as a dependency of python2.7.
Original-Maintainer: Matthias Klose <doko@debian.org>

Package: python
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 624
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: allowed
Source: python-defaults
Version: 2.7.15~rc1-1
Replaces: python-dev (<< 2.6.5-2)
Provides: python-ctypes, python-email, python-importlib, python-profiler, python-wsgiref
Depends: python2.7 (>= 2.7.15~rc1-1~), libpython-stdlib (= 2.7.15~rc1-1)
Pre-Depends: python-minimal (= 2.7.15~rc1-1)
Suggests: python-doc (= 2.7.15~rc1-1), python-tk (>= 2.7.15~rc1-1~)
Breaks: update-manager-core (<< 0.200.5-2)
Conflicts: python-central (<< 0.5.5)
Description: interactive high-level object-oriented language (default version)
 Python, the high-level, interactive object oriented language,
 includes an extensive class library with lots of goodies for
 network programming, system administration, sounds and graphics.
 .
 This package is a dependency package, which depends on Debian's default
 Python version (currently v2.7).
Original-Maintainer: Matthias Klose <doko@debian.org>
Homepage: http://www.python.org/
Cnf-Extra-Commands: python
Cnf-Priority-Bonus: 3

Package: libmpdec2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 247
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: mpdecimal
Version: 2.4.2-1ubuntu1
Replaces: libmpdec2.3
Depends: libc6 (>= 2.14)
Breaks: libmpdec2.3
Description: library for decimal floating point arithmetic (runtime library)
 mpdecimal is a package for correctly-rounded arbitrary precision decimal
 floating point arithmetic.
Homepage: http://www.bytereef.org/mpdecimal/index.html
Original-Maintainer: Matthias Klose <doko@debian.org>

Package: ubuntu-keyring
Status: install ok installed
Priority: important
Section: misc
Installed-Size: 46
Maintainer: Dimitri John Ledkov <dimitri.ledkov@canonical.com>
Architecture: all
Multi-Arch: foreign
Version: 2018.09.18.1~18.04.0
Replaces: ubuntu-cloudimage-keyring (<< 2018.02.05)
Breaks: ubuntu-cloudimage-keyring (<< 2018.02.05)
Description: GnuPG keys of the Ubuntu archive
 The Ubuntu project digitally signs its Release files. This package
 contains the archive keys used for that.

Package: libgcc1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 112
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gcc-8 (8.4.0-1ubuntu1~18.04)
Version: 1:8.4.0-1ubuntu1~18.04
Depends: gcc-8-base (= 8.4.0-1ubuntu1~18.04), libc6 (>= 2.14)
Breaks: gcc-4.3 (<< 4.3.6-1), gcc-4.4 (<< 4.4.6-4), gcc-4.5 (<< 4.5.3-2)
Description: GCC support library
 Shared version of the support library, a library of internal subroutines
 that GCC uses to overcome shortcomings of particular machines, or
 special needs for some languages.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>

Package: util-linux
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 3374
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 2.31.1-0.4ubuntu3.6
Replaces: bash-completion (<< 1:2.1-4.1~), initscripts (<< 2.88dsf-59.2~), mount (<< 2.29.2-3~), s390-tools (<< 1.37.0-0ubuntu7~), sysvinit-utils (<< 2.88dsf-59.1~)
Depends: fdisk
Pre-Depends: libaudit1 (>= 1:2.2.1), libblkid1 (>= 2.31.1), libc6 (>= 2.25), libmount1 (>= 2.25), libpam0g (>= 0.99.7.1), libselinux1 (>= 2.6-3~), libsmartcols1 (>= 2.30.2), libsystemd0, libtinfo5 (>= 6), libudev1 (>= 183), libuuid1 (>= 2.16), zlib1g (>= 1:1.1.4)
Suggests: dosfstools, kbd | console-tools, util-linux-locales
Breaks: bash-completion (<< 1:2.1-4.1~), grml-debootstrap (<< 0.68), mount (<< 2.29.2-3~), s390-tools (<< 1.37.0-0ubuntu7~), sysvinit-utils (<< 2.88dsf-59.4~)
Conffiles:
 /etc/init.d/hwclock.sh 1ca5c0743fa797ffa364db95bb8d8d8e
 /etc/pam.d/runuser b8b44b045259525e0fae9e38fdb2aeeb
 /etc/pam.d/runuser-l 2106ea05877e8913f34b2c77fa02be45
Description: miscellaneous system utilities
 This package contains a number of important utilities, most of which
 are oriented towards maintenance of your system. Some of the more
 important utilities included in this package allow you to view kernel
 messages, create new filesystems, view block device information,
 interface with real time clock, etc.
Original-Maintainer: LaMont Jones <lamont@debian.org>

Package: python-typing
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 93
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 3.6.2-1
Depends: python:any (<< 2.8), python:any (>= 2.7.5-5~)
Description: Backport of the standard 3.5 library typing module
 Typing defines a standard notation for Python function and variable
 type annotations. The notation can be used for documenting code in a
 concise, standard format, and it has been designed to also be used by
 static and runtime type checkers, static analyzers, IDEs and other
 tools.
Original-Maintainer: Sebastien Delafond <seb@debian.org>
Homepage: https://pypi.python.org/pypi/typing/

Package: python2.7-minimal
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 3685
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: allowed
Source: python2.7
Version: 2.7.17-1~18.04
Replaces: python2.7 (<< 2.7.8-7~)
Depends: libpython2.7-minimal (= 2.7.17-1~18.04)
Pre-Depends: libc6 (>= 2.15), zlib1g (>= 1:1.2.0)
Recommends: python2.7
Suggests: binfmt-support
Conflicts: binfmt-support (<< 1.1.2)
Description: Minimal subset of the Python language (version 2.7)
 This package contains the interpreter and some essential modules.  It can
 be used in the boot process for some basic tasks.
 See /usr/share/doc/python2.7-minimal/README.Debian for a list of the modules
 contained in this package.
Original-Maintainer: Matthias Klose <doko@debian.org>

Package: python3-dateutil
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 261
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-dateutil
Version: 2.6.1-1
Depends: python3-six (>= 1.5), python3:any (>= 3.3.2-2~), tzdata
Description: powerful extensions to the standard Python 3 datetime module
 It features:
 .
  * computing of relative deltas (next month, next year, next monday, last week
    of month, etc);
  * computing of relative deltas between two given date and/or datetime objects
  * computing of dates based on very flexible recurrence rules, using a superset
    of the iCalendar specification. Parsing of RFC strings is supported as well.
  * generic parsing of dates in almost any string format
  * timezone (tzinfo) implementations for tzfile(5) format files
    (/etc/localtime, /usr/share/zoneinfo, etc), TZ environment string (in all
    known formats), iCalendar format files, given ranges (with help from
    relative deltas), local machine timezone, fixed offset timezone, UTC
    timezone
  * computing of Easter Sunday dates for any given year, using Western, Orthodox
    or Julian algorithms
 .
 This package provides the Python 3 version of the datetime module.
Original-Maintainer: Guido Günther <agx@sigxcpu.org>

Package: sed
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 320
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 4.4-2
Pre-Depends: libc6 (>= 2.14), libselinux1 (>= 1.32)
Description: GNU stream editor for filtering/transforming text
 sed reads the specified files or the standard input if no
 files are specified, makes editing changes according to a
 list of commands, and writes the results to the standard
 output.
Original-Maintainer: Clint Adams <clint@debian.org>
Homepage: https://www.gnu.org/software/sed/

Package: libsmartcols1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 287
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: util-linux
Version: 2.31.1-0.4ubuntu3.6
Depends: libc6 (>= 2.25)
Description: smart column output alignment library
 This smart column output alignment library is used by fdisk utilities.
Original-Maintainer: LaMont Jones <lamont@debian.org>

Package: netbase
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 44
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 5.4
Conffiles:
 /etc/protocols bb9c019d6524e913fd72441d58b68216
 /etc/rpc f0b6f6352bf886623adc04183120f83b
 /etc/services 567c100888518c1163b3462993de7d47
Description: Basic TCP/IP networking system
 This package provides the necessary infrastructure for basic TCP/IP based
 networking.
Original-Maintainer: Marco d'Itri <md@linux.it>

Package: libwebp6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 430
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libwebp
Version: 0.6.1-2
Depends: libc6 (>= 2.14)
Description: Lossy compression of digital photographic images.
 Image Compression format, based on the VP8 codec.
 WebP uses the modern VP8 compression format to deliver efficient
 compression of images for the web. More than 30% extra gain over
 optimized JPEG, for same quality, is not unusual.
Original-Maintainer: Jeff Breidenbach <jab@debian.org>
Homepage: https://developers.google.com/speed/webp/

Package: libjpeg8
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 26
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libjpeg8-empty
Version: 8c-2ubuntu8
Depends: libjpeg-turbo8 (>= 1.1.90+svn722-1ubuntu6)
Description: Independent JPEG Group's JPEG runtime library (dependency package)
 libjpeg8 dependency package, depending on libjpeg-turbo8.

Package: python-pyparsing
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 252
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: pyparsing
Version: 2.2.0+dfsg1-2
Provides: python2.7-pyparsing
Depends: python:any (<< 2.8), python:any (>= 2.7.5-5~)
Suggests: python-pyparsing-doc
Description: alternative to creating and executing simple grammars - Python 2.7
 The parsing module is an alternative approach to creating and
 executing simple grammars, vs. the traditional lex/yacc approach, or
 the use of regular expressions.  The parsing module provides a
 library of classes that client code uses to construct the grammar
 directly in Python code.
 .
 Here's an example:
 .
  from pyparsing import Word, alphas
  greet = Word(alphas) + "," + Word(alphas) + "!"
  hello = "Hello, World!"
  print hello, "->", greet.parseString(hello)
 .
 This package contains the Python 2.7 module.
Original-Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Homepage: http://pyparsing.wikispaces.com/

Package: binutils-x86-64-linux-gnu
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 11758
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: binutils
Version: 2.30-21ubuntu1~18.04.2
Replaces: binutils (<< 2.29-6)
Depends: binutils-common (= 2.30-21ubuntu1~18.04.2), libbinutils (= 2.30-21ubuntu1~18.04.2), libc6 (>= 2.27), zlib1g (>= 1:1.1.4)
Suggests: binutils-doc (= 2.30-21ubuntu1~18.04.2)
Breaks: binutils (<< 2.29-6)
Description: GNU binary utilities, for x86-64-linux-gnu target
 This package provides GNU assembler, linker and binary utilities
 for the x86-64-linux-gnu target.
 .
 You don't need this package unless you plan to cross-compile programs
 for x86-64-linux-gnu and x86-64-linux-gnu is not your native platform.
Homepage: https://www.gnu.org/software/binutils/
Original-Maintainer: Matthias Klose <doko@debian.org>

Package: python3-pygments
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 3144
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: pygments
Version: 2.2.0+dfsg-1
Depends: python3:any (>= 3.3.2-2~)
Recommends: python3-pkg-resources
Suggests: ttf-bitstream-vera
Description: syntax highlighting package written in Python 3
 Pygments aims to be a generic syntax highlighter for general use in all kinds
 of software such as forum systems, wikis or other applications that need to
 prettify source code.
 .
 Highlights are:
   * a wide range of common languages and markup formats is supported
   * special attention is paid to details, increasing quality by a fair amount
   * support for new languages and formats are added easily
   * a number of output formats, presently HTML, LaTeX and ANSI sequences
   * it is usable as a command-line tool and as a library
Original-Maintainer: Piotr Ożarowski <piotr@debian.org>
Homepage: http://pygments.org/

